Polymer seals

The C11416 is a panel mount sealing gasket fabricated from either ethylene propylene diene terpolymer. This sealing gasket is constructed with an outside diameter of 1.62''. It is constructed with a thickness of 0.06 inches

The PTFE gaskets are highly suitable types of gaskets which are highly suited for a number of variety of sealing applications and are mostly based on virgin PTFE, PTFE compounds, filled PTFE or expanded PTFE. These gaskets are highly ...

Application Information The low cost and moderate shielding of this gasket offer an excellent solution for meeting FCC and European Community EMI requirements. Combining it with a die-cast or molded pinch boss groove gives you the optimal ...

Multishield is a composite material containing excellent EMI shielding with an efficient environmental seal. The material is manufactured with a matrix of wires embedded in silicone rubber and aligned perpendicular to the contact surfaces. ...

Dana?s flexibility creates sealing solutions for every application. Our Victor Reinz? valve stem seals protect from the fouling of exhaust after-treatment devices caused by an increase in hydrocarbon and particulate emissions over time. ...

Temperature limit: -57 ?C - 218 ?C

A silicone rubber strip for frame or casement. Suitable in metal or steel constructions. Greater lifespan than EPDM Exceptionally resistant to chemicals and extreme temperatures Good UV resitance Can be over painted Temperature range ...

The Quick Connect Fittings C11040, C11105 Series is manufactured by LinkTech. The product is made of sturdy natural acetal (POM) thermoplastic materials, complete with a FDA/NSF grade. It also features integrated Buna-N O rings. The ...

The sealing insert is produced out of grooved stainless steel, mild gasketing component or rubber. It is finished with PTFE on either side or on the exterior. Owing to its better chemical solidity, enhanced mechanical characteristics ...

This gasket is made by attaching our Spira-Shield to a solid silicone elastomer which holds the spiral in place. The elastomer can be used to achieve an environmental seal of up to one atmosphere! This gasket can also be made into a custom ...

Diameter: 0.5 in - 6 in

Pressure limit: 840 psi

Self-adhesive EPDM cellular rubber Crown strip Consists of a complete range of joint tapes approved for use in a number of applications. It may be used with or without a top seal in accordance with the regulations set out in MTK installation instructions. ? ...

The quality charter (ISO 9001 Certification) and the respect of the specifications that are determined in partnership, guarantee the quality of our prestations. If customers require a flat seal for the new product, Jicey provides you ...

Characteristics: Single Mechanical Seal Independent on direction of rotation Rubber Bellows seal Unbalanced Limit of applications: Pressure p = 6 bar Speed v = 12 m/s Temperature t = -30 +200?C

It is a liquid material that seals various types of flange surfaces. Once cured, it forms a rubber-like elastic body, and it has excellent vibration absorption property as well as shock- and heat-resistance.

Diameter: 0.5 in - 5 in

The (P)-PF-PT filter element is a pleated high performance PTFE membrane filter. The filter is designed to operate even in extreme process conditions with optimal performance. Thanks to the PTFE and polypropylene construction and thermal ...

Temperature limit: -210 ?C - 260 ?C
Pressure limit: 55 bar

Temperature limit: -200 ?C - 260 ?C
Pressure limit: 0 bar - 85 bar

Material: EPDM Nominal pressure: 10, 16 bar Nominal diameter: 32-600 mm Operation temperature range: -10...+90?C galvanized carbon steel flanges easy to install flanges drilled according to EN-1092-1

ElectroChem offers a wide variety of pre-cut and bulk gasket material. The low precision silicone gaskets are sufficient for typical PEM fuel cell research. The thickness tolerance is +/- 2 mils, so proper thickness selection is critical. ...

The Ultra Black? Max. Oil Resistance RTV Silicone Gasket Maker is a fast curing formula that meets performance specifications of OE silicone gaskets. The tool is ensured to be sensor-safe and non-corrosive with low odor. It is capable ...

Temperature limit: -50 ?C - 200 ?C

Tetratex Industrial Membrane Baghouse Filtering Media have many applications in the dry filtering for over 30 years. It provides spectacular budget savings for its users. This product can enhance the efficiency of your industrial filtrating ...

Features TR PTFE/graphite sealant tape 6732 is made of PTFE/graphited carbon yarn, without additional impregnation. This sealant tape consists of high quality carbon yarns. Advantages Excellent surface conformability High flexibility Ideal ...

Temperature limit: -240 ?C - 270 ?C
Pressure limit: 0 bar - 210 bar

Material: EPDM Nominal pressure: 16 bar Nominal diameter: 20-80 mm Operation temperature range: -10...+90?C galvanized iron thread easy to install

The Ultra Grey? Rigid High-Torque RTV, manufactured by ITW Devcon, is a silicone gasket maker equipped with a high durometer. It has a maximum fill gaps of 0.25 inches and an operating temperature that ranges from -54 ?C up to 260 ?C. ...

O-rings are ring-shaped sealing elements used for static and dynamic applications. O-rings operate as double sealing elements because of their radial cross-section. The starting tightness results from the pressure when mounting the rubber ...

Gasketing, sealed cell sponge rubber, edge safety, window rubber profiles.

Temperature limit: -40 ?C - 85 ?C

Temperature limit: -210 ?C - 260 ?C
Pressure limit: 0 bar - 80 bar

Width: 2.4 mm - 50.8 mm

General Information The GFD spring energized PTFE seal is the newest generation of spring actuated Teflon seals. These seals consist of a special precision jacket/lip made of Teflon (or other high performance polymers) and a corrosion ...

This is an EPDM gasket manufactured by Beisit Electric Co. which comes with various types. This includes PG type, M type and NPT type O ring. This specific tool comes with a working temperature of -50 ? to 150 ?. Also, it comes with a ...

Temperature limit: -35 ?C - 100 ?C
Pressure limit: 450 bar
Diameter: 20 mm - 499 mm

Temperature limit: -100 ?C - 250 ?C
Pressure limit: 0 bar - 100 bar

Radial Lip Seals with PTFE Sealing Lip A reliable sealing for difficult and extreme working conditions The new generation of GFD-rotary shaft lip seals were especially developed for useunder difficult and extreme conditions. The superior ...

From elastomeric parts and seals to micro miniature and custom solutions, Apple Rubber has precisely what you need Sealing solutions for your medical applications. Today's advanced medical procedures and treatments have placed rigorous ...

The Covisil? is a silicone foam profile developed by Saint-Gobain Performance Plastics. It is capable of extruding, co-extruding, molding and over-molding in applications that include air, dust, water and liquids. Compact or cellular ...

Part Number: AG-SF25-10 (10-pack) Size : Oversized Material : Silicone (50 Durometer FDA Approved) Int./Ext : External (designed to compensate for port imperfections, it has a larger o.d. and is more compressible than ...

Provided that they integrate well with SouthCo compact compression latches, these malleable and extensively-adaptable bulb-shaped gaskets from SouthCo deliver high-quality noise suppression, and other dry and wet sealing functions. Their ...

Temperature limit: -35 ?C - 100 ?C
Pressure limit: 450 bar
Diameter: 0 mm - 250 mm

Temperature limit: -240 ?C - 290 ?C
Pressure limit: 0 bar - 200 bar

The 33K system is a seal for rotating shaft, manufactured by A.W. Chesterton Company. This product features a split seal structure used for protection of bearing, gearboxes, pumps and rollers. It excludes the requirement and costs for ...

The 7104 is a soft density sealed cell silicone manufactured by Marsh Bellofram. This silicone is a sponge elastomer-moulded product suitable for operations with sensitive temperatures. It is equipped with sponge materials that are specifically ...

Temperature limit: -40 ?C - 100 ?C

This flat gasket for flange adapter features EPDM ca. 70? Shore hardness and PN10 flange bolt circle. It is equipped with the built-in fixation aids such as centering on the internal diameter of the screw crown. It can withstand a maximum ...

KLINGERtop-chem-2000 Ultimate chemical resistance and mechanical durability combined in one material. The PTFE-gasket, which does not flow: merely 1,6% thickness loss at a surface pressure of 50 MPa and a temperature of 200?C! Basis PTFE ...

Expertise and Innovation As a manufacturer, we can accompany your developments. Always lending an attentive ear to the demands of its clients, Hutchinson O-Ring Division is constantly developing new sealing solutions to meet the client?s ...

The Bellofram Silicone 7404 is specifically designed to provide a good quality performance and functionality. It is considered as a medium firm density cell silicone sponge elastomer device which is ideally constructed for several applications ...

Diameter: 15.05 mm - 26 mm

The Permatex? Single-Use Oil Plug Sealant uses a non-hardening compound that provides protection from leakage, corrosion, and seizing in both assembly and disassembly. The sealant is developed to be application-specific, that secures ...

Maximum chemical resistance and tightness even with low surface pressure. This product is characterised by outstanding surface adaption with low surface pressures and extremely high tightness (German Clean Air Act). Ideal for use with ...

The worlds simplest and most widely used sealing solution The R-type O-ring is a circular ring with a round cross-section. This is currently the most simple and most frequently sold sealing system. It combines: maximum efficiency, small ...

Take advantage of our reactivity for our cut to size seals thanks to our successful tool of digital cut (oscillating knife) - Pieces to measure on drawing or particular specifications - Cutting according any rubber nuances - Pieces from ...

High Precision Cost Efficient Production in ISO 9001:2008 Certified Facility Custom Compound Formulation for Precise Engineered Performance and Optimized Cost In-House Economical Secondary Operations such as Cutting, Bonding, Adhesive ...

These gasketing offers excellent edge protection for sheet materials and is supplied in rolls with internal wire inserts for clip-on, EPDM sponge rubber adhesive seal and compresses against the enclosed body if used on the underside of lids.

External or Internal Interactive Sealing Solutions APM?s custom molded dynamic elastomeric seals are designed to transmit mechanical energy, either internally or externally applied, depending on your application and environmental challenges. ...