Wiper seals

Temperature limit: -30 ?C - 110 ?C
Diameter: 10 mm - 440 mm

Temperature limit: -30 ?C - 100 ?C
Diameter: 400 mm - 2600 mm

Temperature limit: -30 ?C - 110 ?C
Diameter: 12 mm - 260 mm

Temperature limit: -30 ?C - 110 ?C
Diameter: 6 mm - 270 mm

Temperature limit: -45 ?C - 200 ?C
Diameter: 6 mm - 2600 mm

... -oiled compressed air Product description:Pneumatic combination seal, combining a grooved ring and scraper in a single element Application:Single-acting rod seal with good seal ...

Diameter: 12 mm - 40 mm

5K is a Abrasion resistant wiper used for hydraulic and pneumatic applications. Chestertons? provides best designs of rake wiper which adequately removes the unwanted material from rod/ram which prevents ...

... applications. Chestertons? positive rake canned wiper has many other features such as interference press fit design and individually manufactured seals. It does not require support of other external ...

... a separate acting wiper for the safety and sealing protection of the cylinders and pivoting bearings. And it is crafted in compliance to ISO 6195 type B. Moreover, it has a minimum axial height for ...

Temperature limit: -30 ?C - 100 ?C

Parker wipers work in conjunction with rod seals to form the first line of defense in protecting a system and keeping it free from dirt, mud, water, dust, sand, and virtually anything else. Incorporating ...

Temperature limit: -45 ?C - 200 ?C
Diameter: 16 mm - 500 mm

The double wiper AI-D is an elastomer wiper that can be used in the same housing as the standard AI wiper. The wiping lip at the inner diameter of the seal ...

... on the centerline, reducing the tendency to roll out if the primary seal leaks. These designs can be a direct replacement for M28776 scrapers. 2280 Scraper: A bidirectional wiper utilizing an O-ring ...

Greene, Tweed offers a variety of scrapers and wipers to match any application challenge. From harsh media to extreme environmental conditions, Greene, Tweed provides the most reliable materials and scraper designs available ...

Temperature limit: -30 ?C - 105 ?C
Pressure limit: 0 bar - 16 bar

Temperature limit: -30 ?C - 105 ?C
Pressure limit: 12, 16 bar

... Simple clip-in scraper of hardwearing thermoplastic. - Temperature range: -40?C to +100?C. - Supplied in endless form. * Wiper Type L : - Tough rubberised fabric construction. - Well proven design with extensive ...

Temperature limit: -100 ?C - 650 ?C
Pressure limit: 300 bar

Particularly resistant to abrasion. High elastic memory. Suitable for heavy duty. Press fit assembly.

Simple and economical wiper. Reinforced lip. Particularly suitable for mass fitting. Press fit assembly.

Condition of use: Type WPM NBR wipers must be used in working conditions within the following limits: - Temperature -35 to 100?C - Speed up to 4 m/sec. Please will contact our engineering department if you have particular ...

... conditions. Assembly: The assembly of WPU polyurethane wipers, if the inner diameter is less than 20 mm, must be made in open grooves. Avoid any contact of the wiper lips with piston rod connecting parts.