Other seals

FEATURES ? Movement of up to 15% ? Indoor & Outdoor Use ? Paint-able after 3-hours ? Good UV Resistance ? Ageing Resistance ? Solvent Free (water-based) APPLICATIONS DYNA-PRO Acrylic is an elasto-plastic one-component sealant (based ...

LUBRIKUP? RESISTOIL flange and split rings are made from a special composition of neoprene and cotton duck. Engineering a composition ring that resists swell was another LUBRIKUP? first.

The Kemtron ? construct a range of connector gaskets to suit many conventional size connectors which require an EMI shielding with an elective environmental seal. There are a range of connector gaskets available from their tools, in ...

Dymax GA-145 is a UV/Visible light-curable Form-In-Place/Cure-In-Place (FIP/CIP) Gasket formulated for fuel cell, automotive door handle, appliance housing, and critical electronic assembly and device applications which require a soft, ...

Greene. Tweed s RSR* rod or pistor. seal features a specially engineered elastomer profile that provides exceptional "dry rod* sealing under dynamic conditions. The RSR's endless, trapezoidal wedge-shaped back-up ring has an exceptionally ...

Pressure limit: 0 bar - 450 bar
Diameter: 20 mm - 220 mm

FEATURES ? Fungus and mildew resistant ? 100% silicone polymer ? Excellent elasticity ? Solvent-free ? Conforms to ISO 11600-F&G-20HM ? Resistant to ozone, ultra-violet Radiation and temperature extremes APPLICATIONS DYNA-PRO is ...

Temperature limit: 0 ?F - 500 ?F
Pressure limit: 500 psi

Straight EMC Connector NW10 - NW48 "VMEVB" Range Low-ohm screened contact

Greene, Tweed?s RSR? rod or piston seal features a specially engineered elastomer profile that provides exceptional ?dry rod? sealing under dynamic conditions. The RSR?s endless, trapezoidal wedge-shaped back-up ring has an exceptionally ...

Spiral wound gaskets are made of semi-metal and posses high resilience facilitating heavy operation. This system is designed by winding non-metallic filler with a V-shaped metal strip which provides mechanical resistance. Provision of ...

Temperature limit: -57 ?C - 218 ?C

Loctite Gasket Eliminator is a non-corrosive, anaerobic sealer designed primarily for use on aluminum, iron, and steel flanged mating surfaces. Gasket maker fills gaps of up to 0.050" and forms a flexible, solvent-resistant seal that ...

REIKU offers EMC/EMV connectors that are used to terminate the EMI braided assemblies. The multiple piece connector has a inner metal half shell which has a star shaped inner web of teeth that "bite" into the metal brad in order to create ...

Seal Science designs and manufactures rod seals, piston seals, wipers, scrapers, and sealing systems for industrial hydraulic actuators and valves. These include the range from O-Rings and Urethane U-Cups to PTFE/O-Ring combinations and ...

The DONIT TESNIT? grooved gasket provides improved performance at low seating stress, excellent anti-blowout properties linked with the reliability of a solid metal-to-metal seal combined with a soft sealing face to provide a tighter ...

Temperature limit: -200 ?C - 260 ?C
Pressure limit: 0 bar - 85 bar

Vanguard's custom EPDM Elastomers / profiles are used in many applications and industries throughout the world. Vanguard has vast experiencein designing and manufacturing for virtually any requirementincluding: Tubing Military NBC Seals, ...

Pressure limit: 840 psi

Pipe Thread Sealant is a single component, high viscosity, low strength acrylic threadlocking adhesive. It cures in the absence of air between close fitting metal surfaces, has high lubricating properties, prevents galling and resistance ...

401612 -- Copper-Coat? Aerosol, 9 Wt Oz : High temperature, high quality aerosol metallic gasket sealer. Prevents compression loss on premium gaskets. Ideal for head and intake gaskets

Seal Science designs , machines, and molds pneumatic seals for static, reciprocating and rotary applications. It's quite possible that one of the designs in our PolyKing? catalog will meet your needs. Pneumatic actuation systems are ...

These gaskets are used in shell and tube type heat exchangers. They can be manufactured in different sizes, shapes, with or without bars. The primary seal is at the inner diameter of the gasket, the external gasket diameter acts as a ...

The gasket LATTYgraf REFLEX consists of: an active component made of expanded graphite to provide sealing efficiency, 2 precision-machined stainless steel outer rings used as compression limiters. The specific pressure on the ...

For low to medium pressure and median temperatures up to 550?C/1022F RivaTherm-Super gaskets made of a graphite-metal sandwich material have proven themselves a hundred times over with almost all liquid or gaseous media. RivaTherm-Super ...

Gasketing, sealed cell sponge rubber, edge safety, window rubber profiles.

You should know: Apart from the core business of precision O-rings, COG produces mouldings as well. Thus, production of mouldings is based on decades of competence in the environment of elastomeric sealant materials as well. Rotation-symmetric ...

Seal Master? inflatable seals inflate and deflate in three basic directions of operation: th eaxial (or normal to the mounting plane) direction, the radial-in direction, and the radial-out direction. Each of these inflation directions ...

The 5-110.02 is a channel sealing profile from Dirak. It features door seals which are made of PVC. These seals enable the application of the profile in seal channels. The door seals are available in different models for different door ...

DONIT presents TESNIT? grooved gaskets. These are an ideal choice where there is a need for superior performance at low seating stresses. They provide improved anti-blow-out properties. The combination of a dependable and solid metal ...

Temperature limit: -240 ?C - 290 ?C
Pressure limit: 0 bar - 200 bar

Provided that they integrate well with SouthCo compact compression latches, these malleable and extensively-adaptable bulb-shaped gaskets from SouthCo deliver high-quality noise suppression, and other dry and wet sealing functions. Their ...

Examples of ring seals, which are used for laboratory testing and production line fixtures. (The seal shown on in the image gallery on the right has an outside diameter of only one inch.)

Diameter: 14 mm - 304.8 mm

These corrugated gaskets have been designed without a layer. There are various types of metal gaskets which include groove, tongue, flat and sectional gaskets. They are utilized when the compressibility (elasticity) of the sealing material ...

Temperature limit: -200 ?C - 600 ?C
Pressure limit: 0 bar - 500 bar

Developed in answer to industry's need for a better way of sealing components in place during manufacture, PRECOTE? 5 has been approved worldwide by automotive manufacturers and has proved invaluable in electronics, telecommunications, ...

Temperature limit: -30 ?C - 120 ?C
Pressure limit: 25 bar

Soprima presents sealing resins. The products are chemically passive. The resin enlarges in the assembly when mounted and provides an immediate sealing. The sealing is useful for several applications. These include sealing of screws, ...

Timken has developed a high efficiency over the decades by determining seal performance along with enhanced innovative sealing. Several combinations of bearing assemblies such as AP-2? makes it the most essential component affecting the ...

Specifications? ANSI CLASS 150 JIS 10K DIN PN 10 ? ? Materials? PTFE PTFE+EPDM PTFE+VITON

The Flowserve's GCX is suitable for working under chemical changing environmental conditions. It is intended for various sealing applications. It is operable in implementations which involves transitional chemical applications.

Moulded and pressure vulcanised parts made of silicone Shape and dimension fixed in accordance with the customer's requirements - sizes up to 500 x 500 mm Standard hardness is 40 Shore - other on request Standard colour ...

Take advantage of our reactivity for our cut to size seals thanks to our successful tool of digital cut (oscillating knife) - Pieces to measure on drawing or particular specifications - Cutting according any rubber nuances - Pieces from ...

Temperature limit: -30 ?C - 120 ?C
Pressure limit: 25 bar

Material: EPDM Nominal pressure: 10, 16 bar Nominal diameter: 32-600 mm Operation temperature range: -10...+90?C galvanized carbon steel flanges easy to install flanges drilled according to EN-1092-1

Oil Seals Oil seals ? often called grease, fluid or dirt seals ? close spaces between stationary and moving components in mechanical equipment, helping prevent lubricant escape. They also stop harmful contaminants from entering machinery, ...

tem Number : PF11-3 ? ? Specifications? ASTM A48 grade 25 PFA

Temperature limit: 180 ?C
Pressure limit: 10 bar
Diameter: 25 mm - 280 mm

Our 25 compression packings for centrifugal pumps and rotary equipment cover shaft speeds up to 25m/s - as well as providing unrivalled chemical and abrasion resistance. For less demanding applications, many of our economical XA and ...

PTFE has an excellent chemical inertness, exceptional dielectric properties and excellent sliding behavior. This plastic can be modified with glass, bronze, carbon, graphiteto optimize its performance based on the application.

Material: EPDM Nominal pressure: 16 bar Nominal diameter: 20-80 mm Operation temperature range: -10...+90?C galvanized iron thread easy to install

HDL? Seals This close-clearance designed seal never touches the mating surface. Its benefits include lower torque, lower temperatures and better fuel efficiency with fewer set outs, higher service speeds and lower operating costs than ...

Cord seals (also known as rope seals) offer designers and engineers the ability to increase operating efficiencies when installed to reduce hot gas leakage between components in aircraft engines and hot aero structures. The seals are ...

The GF's profile flange gaskets are made out of carbon steel, with steel inserts, and are often used in various gas and water applications. They are compatible with all metric GF flange adapters, and are DIN EN 682, DVGW W 270, KTW approved. ...

We have almost 20 compression packing grades for reciprocating pumps and rams. Between them, they will handle duties to well beyond 250bar on slurry pumps -- plus the unusual demands of massive water-powered rams for boat lifts on canals.

CB are single lip seals with completely rubber covered outer diameter. O.D design : Flat Rubber Advantages - Good static sealing - Compensation of different thermal expansion - Reduced risk of fretting corrosion - Higher bore surface ...