Components for modular structures

Kee Klamp Galvanised Fittings Kee Klamp cast iron tubular fittings offer the most flexible solution for the construction of safety railing, handrails, guardrail and barriers. Kee Klamp fittings were designed in 1934 and initially ...

Immediate clamping in case of loss of pneumatics: Suitable for rods with diameters of 20 to 40 mm, the clamping elements from the LOCKED-Series PN absorb the forces axially and rotationally. With holding forces of up to 36,000 N, they ...

RAC_RO RAC_T TUBE CONNECTORS FOR ROUND TUBES RAC_T ROUND Material : PA6 Black Dimensions : mm Ideal for round tube Dimension based on external dimension and thickness of the tube

T-joints are designed for connecting side pipelines to the main pipelines of thermal power plants (TPS, TPP, SDPP). T-joints are installed and operated according to working parameters and working mediums. Under manufacturer?s consent ...

RAC_T TUBE CONNECTORS FOR SQUARE TUBES RAC SQUARE Material : PA Black Dimensions : mm Ideal for square tube Dimension based on external dimension and thickness of the tube

The clamping bores of the two-way connector clamps GN 135 are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The square designs are also suitable for use in profile ...

The T-piece, corrugated pipe, s. steel by Wurth has a stainless steel material with an ET G 3/8 in x ET G 3/8 in x ET G 3/8 in connection thread and a DN8 DN nominal width. While the length and length 2 measure 40 mm and 20 mm respectively, ...

? Temperature Range:Min-40?,Max 115?,Short-term150? ? Color: grey (RAL 7037), black (RAL 9005) ? Material: Polyamide ? Protection degree: IP66 ? Flame-retardant: Self-extinguishing, free of halogen, phosphor and cadmium,passed RoHS

The clamping bores of the angle connector clamps GN 196 are specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The standard clamping screws are socket cap screws DIN 912. They can be replaced ...

Our 3-way connector has been designed to connect square tubes. It is supplied with or without internal metal core. This connector has a rounded external part which gives a good finish.

Temperature Range: Min-40?,Max115?,Short-term150? Color: grey (RAL 7037), black (RAL 9005) Material: Polyamide Protection degree: IP66 Flame-retardant: Self-extinguishing, free of halogen, phosphor and cadmium, passed RoHS.

Ganter from Furtwangen provides a wide assortment of tube clamp connectors, clamp mountings and linear actuators. These tools are all mainly built out of stainless steel and aluminum. Its tube clamp connectors provides a solution for ...

Duct connector DN100 Male duct connector, Galvanised steel. Article no.: 90-1028-100 DN125 Duct connector Duct connector DN125 Male duct connector, Galvanised steel. Article no.: 90-1028-125 DN160 Duct connector Duct connector ...

The clamping bores of the two-way connector clamps GN 132 are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The standard clamping screws are socket cap screws DIN ...

The clamping bores of the two-way connector clamps GN 132.5 are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The shape of the clamping screws / nuts prevents the ...

Description: Connector 90? 1-fold. Material: Zinc-plated-steel Color: Black Packaging Unit: 10 pcs. Connector / Pack unit

The GN 131 range of two-way connecting clamps are made with aluminum. These two-way connecting clamps are designed with assembly holes that allow them to be paired with GN 990 tubes. Its d3 clamping screws may be easily replaced into ...

Description: Connector 90? 1-fold parallel. Material: Zinc plated steel Color: Black Packaging Unit: 10 pcs. Connector / Pack unit

The GN 163 Connecting Clamp Bases features a manufacturing hole which permits perfect integration with GN 990 tubes, as well as a clamping screw (D3) which can be interchangeable, by means of a GN 911 clamping kit. It sports varying standard ...

Italian design. Fixations by means of spiders and rotules. The absence of bolts and screws at sight gives the whole structure a refined finish. Stainless steel aisi 316L.

A quality joint does not only require reliable welding systems, but also proper pipe preparation, the right accessories, and the right tool. Our product offering includes a broad range of tools and appliances for the proper mechanical ...

The GN 298 range of T-shaped and angular connectors are made with epoxy resin-coated aluminum, with matte, black finish. They utilize clamping screws and grubs made with stainless steel. The GN 298 offers two models for specific executions, ...

The T...-H1 is a heating tube connector. The device is electrically heated on a maximum of 180 ?C. The temperature of the device is constant and regulated. The device consist of an integrated thermostat. There are no cold bridges on the ...

When the end of the profile is not quite the end of the frame, its time to use Butt Fastener D30-180?. This fastener connects Profiles D30 together end to end. This method of extension is suitable when seeking to increase the length of ...

Made from black thermoplastic, the socket head screw to DIN 7984 and the hexagon nut to DIN 985 in galvanized steel. The cross lamp squares tubes measure 30 mm and they can be clamped. The smaller tubes can also be clamped and converted ...

Tubular connection elements basic sizes for round tubes available in ?18 mm or ?30 mm. When smaller tubes need to be converted or clamped from round to square tubes, these are adjustable based on the required fittings via the reduction ...

The K0476 Angle clamps is made from cast aluminum and vibration ground. The clamping screw with nut is made of galvanized steel. It comes with round and square tubes K0493, dependent on the specific tube fixing system. Various diameters ...

Plug system that is screw free. The Plug connectors are inserted in the corresponding square tubes. They can be disassembled and used multiple times. Accessories feature a square tubes K0627 and square tubes with web K0628. Made from ...

Tubular connectorss RV Material: Chill casting of high-grade aluminium alloy in accordance with DIN 1725. Surface treatment: - Rough state - Drum polished - High-gloss polished - Vibratory ground, dull finished and technically ...

Aluminium GD End cap MW 90 R 90?, grey, Part. N? 22.0980/1 Angle 45?, Part. N? 21.1708/2 Angle 19 GD-Z, Part. N? 21.2078/2 Fastening kit Weight 0,267 kg Applications Corner connections of profiles 90 R 90? ...

Techn. Data / Items supplied Aluminium GD, powder coated, grey Fastening kit for profile Weight 0,499 kg Applications Suitable for all profiles Floor mounting of guard units, information plates and frames As ...

Techn. Data / Items supplied : ABS, grey Weight 0,008 kg Applications : applicable for profile series 45 for subsequent mounting of panel elements 2 mm to 6 mm circular joint clearance 7 mm Assembly : slip socket into profile groove insert ...

Rohde offers tubular connectors RV that are at par with the standards of DIN 1725. These tubular connectors feature a variety of surface treatments including powder coatings, high-gloss polishes, drum polishes, rough states and more. ...

Made with chill casting of high-grade aluminum alloy in accordance with DIN 1725, the tubular connectors RV has a surface treatment of rough state, drum polished and high-gloss polished. It has vibratory ground, a dull finished and is ...

Techn. Data / Items supplied ABS, grey On request also deliverable in black Weight 0,158 kg/m Length 2 m Applications Useful for subsequent fitting of profiles into existing profile frames Fastening of panel ...

Benefits Fast assembly Easy to disassemble High tensile strength Conduit retained by rib No loose parts Application range In combination with protective conduit SILVYN? RILL PA 6 SILVYN? ...

Item Number PT15 ? ? Materials PTFE ? ? Dimensions 1 ? ? Operating Pressure

NorcaN, the leading French manufacturer of modular aluminum construction systems. markets this range of steel coated tubing under the brand careNal. Simplicity, fl exibility and the low price levels of this range lets you achieve ...

Spe?cial fea?tures With choice of fe?male or male threads Avail?able with in?te?grated vac?uum gen?er?a?tor

Spe?cial fea?tures In?te?grated vac?uum con?nec?tion Vac?uum (bar) -0.8 Com?pressed air con?nec?tion

Adapter sleeve for aluminium tube connectors In industry, Lean applications like transport trolleys, in-line workstations and the like are often built on the basis of 28 mm tubes and corresponding sheet metal connectors. The new reduction ...

The Corner connector permits perpendicular connection of mounting plates to achieve orthogonal deflection of the optical axis or to split the beam. ? For assembling mounting plates parallel or orthogonal to one another Length of 40 or ...

Robust Clamps ? Stainless steel clamps Exterior hex screws facilitate installation with standard tools and a silicone thread coating protects the threads against soiling and damage. Furthermore, optimised smooth contour transitions increase ...

The Swivel connector provides a backlash-free connection between two mounting plates, and has a pivot range of 120?. The ball-bearing mounted joint is pretensioned for backlash-free adjustment. The Connector 80 V is ideal for fixing the ...

The RK LightClamps plastic connection system guarantees utomost flexibility thanks to the design of ist reducing bushes. This design enables the clamping of the most various tube sections and diameters. The change to other diameters ...

The RK, manufactured by RK Rose + Kreiger, is a tube connector that has a simple design that enables the fast assembly of round and rectangular precision tubes. Its different variants makes the system a cost effective substitute to traditional ...

Rubber-metal pipe connectors are utilized in standard residential structures, hospitals, schools, etc. Since noise generated by apparatuses, burners, or pumps tend to be highly bothersome, STENFLEX? provides a simple solution. Their Pipe ...

The system of assembly for tubes is composed of elements of tightening which are capable of creating gauges, installations, and operating systems. Also, it allows easy performance through the use of sections of standard tubes. The ...

The CIT series is a plastic tube connector developed by BMP Tappi. It is specifically developed with Polyethylene (PE-HD) construction with black color. This round tube connector is engineered with 20 mm to 32 mm dimensions. In addition, ...

The CTQ Series manufactured by BMP Tappi is a square tube connector that is made from polyethylene or PE-HD construction or body materials. Additionally, this device is coated with a black color. Moreover, the CTQ square tube connector ...

Ortac Special Cable Gonnection Parts Polyamide PA6 V2 UV Resistance Various application& combinations Wide cable range Easy to assemble Halogen free

Tube holder for pipe welding In many cases pipe stands for pipe welding are still built in the workshop. More safe and usually cheaper is the purchase of a professional pipe stands. The marking of pipes and the preparation of pipe ends ...

X tubing connector, four-way connector to connect hoses. - PP, Temperature resistant up to +135?C max. - PVDF, Temperature resistant up to +160?C max., highly resistant to chemicals - Sterilisable

PANOZZO SRL produces pvc and pipe fittings. Our catalogue in fact ranges from thread protection devices to plastic tube plugs and plastic tube caps, also including sealing plug for the hydraulic field, pipe end closures, flange protectors, ...

PANOZZO SRL produces pvc and pipe fittings. Our catalogue in fact ranges from thread protection devices to plastic tube plugs and plastic tube caps, also including sealing plug for the hydraulic field, pipe end closures, flange protectors, ...