Studs

Materials Steel Grade 4.8 - 6.8 - 8.8 - 10.9 Stainless steel Aluminium and alloys Copper Brass

... mounting, the use of folding spring bolts is recommended. Cotter bolts can also be used as a reliable means of fastening. The bolt sizes correspond to the respective fork joints.

Diameter: 6 mm - 30 mm

The PKS / PKSAL Series, manufactured by Chiavette Unificate, is a series of pins. These pins, whenever used in combination with clevises, have the capability of connecting the clevis with the mechanical part for the transmission of the ...

Length: 0.63 in - 2 in

Diameter: 0.51, 0.39 in
Length: 0.3 in - 1 in

Diameter: 5 mm - 18 mm
Length: 18 mm - 58 mm

Length: 0.75 mm - 5 mm

... 1445, measuring 4 mm - 60 mm in diameter, and from DIN EN 22338 to DIN EN 22341 measuring 20 mm - 200 mm in diameter. This bolt can be used or attached to many compatible tools including clevis fasteners..

... EN 22338 to DIN EN 22341 measuring 20 mm - 200 mm in diameter. This long list of bolt offering enables diverse industrial applications. They also produce certain bolt models that is no longer available ...

Diameter: 4 mm - 65 mm
Length: 0 mm - 350 mm

Diameter: 4 mm - 12 mm
Length: 20 mm - 120 mm

Diameter: 11 mm

AMECA offers weld lugs which can simply and immediately fit, designed for high-pulling resistance without affecting the substrate sheet metal. These are available in various sizes and designs to satisfy your numerous welding solutions. ...

Spindle with head covered in neoprene and 2 nuts. Toggle clamps - Accessories ** Also available in stainless steel material **

Length: 2 in - 12 in

Head joint spindle and 2 nuts. Toggle clamps - Accessories. ** Also available in stainless steel material **

Spring spindle. Toggle clamps - Accessories. Spring spindle.

The SGL stud is a non-threaded stud, symmetrical with 2 chamfers. Thus after welding the stud is non-threaded up to the weld-fillet. Following to needs, 2 kind of chamfers possibles, ...

The SGT stud is an internally threaded stud with 1 chamfer. Thus after welding the insert is non-threaded up to the weld-fillet. Following to needs, 2 kind of chamfers possibles, 45? or 60?. The diameter ...

Diameter: 4 mm - 8 mm

... blind rivet nut and screw, blind rivet nut studs offer an alternative or replacement for welding studs. The following applications are particularly suitable for the use of GESIPA? blind rivet nut ...

Diameter: 5 mm
Length: 13 mm

Diameter: 9 mm - 54 mm
Length: 40 mm - 66 mm

Diameter: 3 mm - 5 mm

Diameter: 5 mm - 16 mm
Length: 40 mm - 150 mm

Diameter: 6 mm - 38 mm

Low-Temperature 1.7218, 1.5680,1.7225 High-Temperature 1.1181, 1.7218,1.7225, 1.7709,1.4923, 1.4828 a.s.o.

Diameter: 12 mm - 24 mm
Length: 100 mm - 250 mm

The EH 1644.000 is a threaded bolt manufactured by Halder. It is made from tempered heat-treated seal that has a quality rating of 10.9. Furthermore, this threaded bolt weighs 9 g.

Diameter: 5 mm - 20 mm
Length: 20 mm - 180 mm

Diameter: 6 mm - 16 mm
Length: 15 mm - 100 mm

Diameter: 6 mm - 8 mm

From simple to complex, mounting studs to the more complex ABS cold-formed components, ATF is the leader.

Diameter: 13.75 mm - 32.75 mm
Length: 30 mm - 102 mm

Diameter: 5 mm - 10 mm

Diameter: 12 mm - 24 mm
Length: 125 mm - 210 mm

Strux? stud is a captive fastener. This device is clinched into formed sheet metal panels for producing ready-to-install sheet metal components. It is an economical substitute for conventional weld studs. ...

The SALD-STUD Series manufactured by SpecialInsert is a press-in and threaded spacer. This device is equipped with a threaded stud made with a striking step that is characterized as a rounded-off component. ...

... strength provides the space and weight saving which results to the high aesthetical level. This device is equipped with a threaded stud and a cylindrical nut.

Diameter: 5, 4, 3 mm
Length: 6 mm - 35 mm

Diameter: 3 mm - 5 mm

FEATURES: Lifting Eyes are forged steel eyebolts with an integral shoulder for greater strength. These simple, economical lifting devices are suitable for vertical lifting in-line with the threaded bolt, such as when lifting from a single ...

Hardened ground parallels, work piece stops and deflectable jaws are all available with magnetic bond technology that helps to attach them in an eye blink. Soft jaws for different clamping chucks and vises are available with a new, high-accurate ...

Diameter: 2.5 mm - 10 mm
Length: 8 mm - 80 mm

Welding studs are a great alternative to screws and to self-clinching fasteners; they can be produced in iron copper, in stainless steel, in aluminum and in brass and they can be welded to any type of metal sheet (iron, ...

Diameter: 2.5 mm - 10 mm
Length: 8 mm - 80 mm

Self-clinch studs (flush head studs) are fasteners that have a serration under the head. At inserting into the metal sheet it presses the displaced material into the rivet ring to secure the fastener. Advantages: ? ...

To fasten components to profiles, brakes the anodized coat of the profile - thus ensuring a safe, electrically conductive connection Material Stainless steel SS316 Pack Quantity 100 pieces

To hold two panels together or a trim piece to a panel Not disassemblable

Diameter: 4 mm - 12 mm

To hold insulation or a trim piece to a panel with welded studs Installed by pushing onto the stud, and then tightening with a straight bladed screwdriver to clamp up Disassemblable by unscrewing ...

Utilizing Superbolt technology, Nord-Lock is able to offer tremendous radial expansion and joint clamping power in one bolting system. The Expansion bolts replace traditional interference or force fit bolts. Radial expansion is critical ...

... applications. They solve many problems of assembly of thin sheet metals. Rivit offers a comprehensive range of fasteners like studs for through holes, available in stainless steel and carbon steel, for blind holes available ...

Injection molded threaded studs with chamfer on both ends are available in several of the most popular sizes and lengths. Threaded studs are molded in natural Nylon 6/6 UL 94V2. These studs ...

... categorized into threaded studs, unthreaded studs, tapped studs, 1 or 2 contact faston, and insulation nails. In threaded studs, available in copper-plated steel, stainless ...

Length: 6 mm - 40 mm

Diameter: 3 mm

The CLUFIX-STUD? Insert provides a good solution for applications that involve blind assembly of studs on profiles or thin sheets. The tool enables assembly of several work pieces while still rendering ...