Seals for special applications

KLINGERspecial is the name for a brand new sealing concept. The well-known flat gasket takes over additional functions, thus becomes a "sealing component", wich is designed for special applications. With this concept, contrary to the ...

The agitator seal for dry running applications Single seal Dry running Outboard Independent of direction of rotation Balanced For top drives MXS the dry-running agitator seal. Developed to seal the gas blanket ...

We manufacture 20 grades of compression packing for valve stem duties. A number of these are highly recommended for VOC fugitive emission control, with our Supagraf? Premier independently rated as the world-beating product in its class.

Temperature limit: -30 ?C - 120 ?C

With Greene. Tweed's ACGTTV-HP/ACGTLT,,-HP seals extrusion gaps and high pressures are no longer a challenge. The ACGT-HP is a bidirectional design while the ACGTL-HP is designed for unidirectional applications. Both variations are extremely ...

Set consists of O-rings or profiled seals and brass nut. Seals are placed onto solenoid base, under and above solenoid and fixed with brass nut. Properly fitted sealing set prevents damp intrusion into solenoid.

Our 25 compression packings for centrifugal pumps and rotary equipment cover shaft speeds up to 25m/s - as well as providing unrivalled chemical and abrasion resistance. For less demanding applications, many of our economical XA and ...

The unique G-T? Ring provides a compact, double-acting seal for use in new designs or existing applications where O-rings are failing. The G-T Ring can. be retrofitted into standard grooves designed for O-rings with one, two or no backups. ...

Dana?s flexibility creates sealing solutions for every application. Our Victor Reinz? valve stem seals protect from the fouling of exhaust after-treatment devices caused by an increase in hydrocarbon and particulate emissions over time. ...

Temperature limit: -210 ?C - 650 ?C
Pressure limit: 0 bar - 65 bar

Seal Science is a complete engineering and manufacturing resource for the development and supply of a wide range of molded rubber components. Seal Science's material design group provides customers with custom engineered compounds capable ...

External or Internal Interactive Sealing Solutions APM?s custom molded dynamic elastomeric seals are designed to transmit mechanical energy, either internally or externally applied, depending on your application and environmental challenges. ...

The gasket LATTYgraf REFLEX consists of: an active component made of expanded graphite to provide sealing efficiency, 2 precision-machined stainless steel outer rings used as compression limiters. The specific pressure on the ...

Seal Science designs and manufactures seals and components from any high performance plastic, thermoplastic rubber (TPE's ,TPR's or TPU's), and urethane. SSI incorporates design engineering, materials science, and precision manufacturing ...

Ball joint seal connecting engine to manifold exhaust line - Catalytic converter components : mesh, support, spacer, seals, gaskets - E.G.R. components

Expertise and Innovation As a manufacturer, we can accompany your developments. Always lending an attentive ear to the demands of its clients, Hutchinson O-Ring Division is constantly developing new sealing solutions to meet the client?s ...

Width: 8.6 mm
Height: 18 mm - 28 mm

Silicone-Profiles Silicone - Profiles can take nearly any conceivable shape from very simple geometries (squares, cords) to very complex cross-sections. To date we have at our disposal more than a thousand dies of profiles, which ...

Timken is equipped with Redi-Seals which are specifically designed solutions produced under 24 hours for reducing the downtime for industrial customers. These seals are properly tested and certified and available in proper volume even ...

The 5-110.01 is utilized as a basic door profile for lids, doors, and in paneling. The unit is just simply pushed onto the sheet metal edges. Also, the device can be used even without the need for warping or mitering. The product ...

The PROOFMATE? Waterstops are designed to be installed for sealing in construction and movement concrete joints. The application of waterstops is normally according to jobsite specifications, WU Guidelines or the DIN 18541 and DIN 18197. ...

Silicone foam articles Silicone foam articles are characterised mainly by melr predominantly closed cell structure, which is responsible for very low water absorption. It is possible to develop the outer skin more strongly to ...

Rotary sealing is one of the most common applications for Repack-S seals, from oil and gas turbo-compressors, race engines to large hydropower valves and industrial pumps. application rotativebdRepack-S supplies mechanical seals, lip ...

Oil Seals Oil seals ? often called grease, fluid or dirt seals ? close spaces between stationary and moving components in mechanical equipment, helping prevent lubricant escape. They also stop harmful contaminants from entering machinery, ...

Temperature limit: -30 ?C - 105 ?C

PROOFMATE? EK Box profile based on EPDM (EPDM = ethylene propylene diene monomer) for sealing of dilatation and construction joints and for joint endings. For sealing of dilatation joints from 17 up to 100mm Three-dimensional ...

We can provide plate heat exchanger gasket of all types and all brands.

Addix, an Axon group subsidiary, is specialised in the manufacture of elastomeric parts and components with materials including natural rubber, silicone, NBR, FKM, EPDM, Butyl, FDA compounds and aeronautics approved compounds for any ...

Temperature limit: -54 ?C - 200 ?C
Pressure limit: 35000000 Pa
Diameter: 1.93 mm - 405.75 mm

Temperature limit: -30 ?C - 105 ?C
Pressure limit: 0 bar - 12 bar

FerroLabs, Inc. manufactures FFS for lab fermentors of 0,010,02 m3 (Fig.1-3) that have been thoroughly tested for sterility, hermeticity, virus/cell neutrality, and recommended for biological industry. FFS configuration is autonomous ...

The JOINTEX? is a flange gasket made of high quality sheet of PTFE. The device makes the mechanical properties isotropic in the plane of the seal. The gasket can resist creep and optimum sealing capacities even on a high temperature. ...

Temperature limit: 0 ?C - 325 ?C

Seats and ball joints are used in the aerospace industry, in concrete and in helicopters. Both pieces are used to inclinate the rotor blade in the helicopter. Those parts are subjected to a very aggressive enviroment that increases the ...

Fig.1 The specific feature of these seals is a possibility of working at great shaft wobbling (up to 0.7 mm). FFS include a magnet assembly that consists of (see Fig.1) a permanent magnet 5 and pole tips 1 [2]. The magnet assembly is ...

Metalpol is a corrugated ring of stainless steel AISI 304, a material which guarantees maximum resistance to oxidising and to mechanical stress. The ring provides the necessary elasticity to guarantee an excellent tightness and, at the ...

Temperature limit: -60 ?C - 325 ?C

The Gina gasket and Omega seal are used between the sectional elements of immersed tunnels to prevent water ingress due to external water pressure. The combination of seals not only allows for sealing but also for the transfer of the ...

Temperature limit: -240 ?C - 260 ?C

Temperature limit: -25 ?C - 325 ?C
Pressure limit: 200000000 Pa

Since the 60?s Trelleborg has manufactured a large number of Omega seal joints. Originally the Omega Seal was designed as a secondary seal for immersed tunnels in combination with the Gina gasket/seal as the primary seal. Applications ...

SEALING PROFILES Self-gripping sealing profile made with a black PVC carrier with sealing lip or sealing tube from EPDM. Integrated steel strip core. Other colours are available on request.

Temperature limit: -200 ?C - 260 ?C
Pressure limit: 40000000 Pa
Diameter: 0.5 mm - 1000 mm

Temperature limit: -40 ?C - 220 ?C

JETSEAL is on the cutting edge of sealing technology with the uniquely designed and patented Lever Seal. The Lever Seal is superior to other high deflection seals available. Due to its unique stress-distributing design, the Lever Seal ...

SEALING PROFILES Self-gripping sealing profile made with a black PVC carrier with sealing lip or sealing tube from EPDM. Integrated steel strip core. Products marked with * are available on request only. Other colours are available on request.

The XMS profiles are based on Line X. The contemporary profile shape with its clear contours and smooth side panels offers both practical functionality and timeless design. The internal grooves in the XMS frame profiles are ideal for ...

The Orobica Plast-Gom is capable of producing gaskets specifically for butterfly valves. It is equipped with set of joints with accordance to the DIN-ISO -CLAMP-S.M.S.-BS -IDF standards, for alimentary, pharmaceutical and chemical industries. ...

Multi-Convolution Seal rings are designed for low to moderate sealing force conditions and high spring back. JETSEAL manufactures Multi-Convolution Seal rings for high cyclic deflections, high temperatures and high pressures. Our Multi-Convolution ...

Material:NR Compound designation A+P:NR 45-67.01 Hardness:45 ?5 Shore A Colour:beige (~ RAL 1001) Working temperature:-40 to +80 ?C Medium stability:for water, alcohols, glycols, silicone oil and diluted aqueous ...

Temperature limit: -450 ?F - 500 ?F
Diameter: 0 in - 120 in

ADS engineered gaskets meet ASTM F477 standards. These gaskets allow soil-tight joints and watertight joints to meet 10.8 psi requirements for ASTM D3212. Gaskets are factory-installed and need no further field installation, making soil-tight ...

Diameter: 21 mm - 330 mm

This product is a sealant for pipes, such as gas pipes and drinking water pipes.

GLAZING PROFILES Glazing profile for easy and firm mounting of windows, panels, etc. Use together with filler profile on page 4-200. This glass sealing profile is shown with the glass-groove (A) facing upwards and the frame-groove (B) ...

Profile Sealing Rings of the WDG series are used as elastomeric sealings for selected male threaded studs Used for male studs according to ISO 1179-2 (Type E) / ports according to ISO 1179-1 Used for male studs according to ISO 9974-2 ...