Caps, plugs, technical plastic parts

For those cases in which it is unnecessary to remove guards, it is still possible to employ simple bolt and fittings fixing systems. Access supplies complete fitting kits which include panel linking fittings, base support fittings, PVC ...

Diameter: 0.38 in - 2.25 in

Diameter: 12 mm - 60 mm

Diameter: 15 mm

Diameter: 24.5 mm - 78 mm

Diameter: 0.5 in - 8 in

S&W's NEW Polyglass Filled Nylon Tube End Adaptors support more weight for a fraction of the cost of traditional brass plugged designs. S&W has spent six months and invested heavily in testing and support for this revolutionary new product. ...

For use in the propeller shafts of ships? drive units. To protect and hold the internal ball bearings of the universal joint and fasten the shock absorber of the propeller shaft. Highly ductile punched part made of sheet steel

Diameter: 100 mm

Diameter: 88.5 mm - 205.5 mm

The rubber stops can be specially manufactured in economical lot sizes and are available in other hardening adjustments. They can also be manufactured in contact neutral quality.

Diameter: 30 mm - 80 mm

Diameter: 0.13 mm - 1 mm

For use in automobile propeller shafts. To protect and hold the internal ball bearings of the universal joint and cover the propeller shaft. Highly ductile punched part made of sheet steel

The 316 Stainless steel SW round cap by FG Inox, is a pipe accessory casting nut that features different valve sizes. In order to get the correct casting nut, technical data must be provided such as the DN valve size, the diameter, the ...

Diameter: 12 mm - 35 mm

Diameter: 57 mm

The Round Ribbed Tubing Plug is developed by GummiVogt. It is fabricated with compliance to ROHS directive requirements. The unit is supplied with 8 different lamellar that fills holes at 4.0 to 24.0 mm diameter. It is also equipped with ...

Diameter: 0.5 in - 1 in

Operating temperature: 100 ?C

Skiffy cable gland covers of the 127 series are made out of nylon 66 (polyamide 66) and feature a metric thread pitch of 1.5 mm, and fit in electro cabinets perfectly. They are available in 4 versions and dimensions of M16, M20, M25 and ...

Material: Flexible PVC Finish: Gloss Standard Colour: Red or Black Options: All RAL colours can be produced (MOQs apply).

Material Available in: ? Plastic (Reinforced ABS, Nylon) ? 304 stainless steel ? 316 stainless steel ? Super Duplex stainless steel (2205) ? Super Duplex stainless steel (2507) Pressure rating: ? 100psi (7bar) up to 1200psi (81bar)

Diameter: 12 mm

Diameter: 9 mm - 29.9 mm

Material Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish. Packing ring NBR synthetic rubber O-Ring. The positioning of the O-Ring in its housing guarantees a high tightening torque. Standard ...

The ROHS, manufactured by A. Vogt GmbH & Co.KG, is a round ribbed tubing plug. It comes in eight different lamellar stops versions that can fill holes on a diameter range of 4,0 mm up to 24,0 mm. The dead hole at the head side ensures ...

Diameter: 0.25 in

Operating temperature: -80 ?C - 100 ?C

Rollers: Made of steel, zinced (SBK) or plastic (KRK), with ball bearing. Easy rolling, especially suitable for roller tracks. Rollers of the lines SBKS and KRKS with flange

Material: Flexible PVC Finish: Gloss Standard Colour: Red or Black Options: All RAL colours can be produced (MOQs apply). Please Note: This product has a Minimum Order Quantity of 2000 pieces

Wilson Tube Plugs offer a low-cost, quick, and efficient method of sealing leaking tubes. They are installed easily so the pressure vessel get back on line. Minimum driving is required to establish a positive seal in seconds. The tube ...

Diameter: 100 mm

Diameter: 0.13 in - 1.25 in

Material Glass-fibre reinforced polyamide based (PA) technopolymer, red colour similar to RAL 3000, matte finish. Packing ring NBR synthetic rubber O-Ring. The positioning of the O-Ring in its housing guarantees a high tightening ...

The ROHS system, manufactured by Gummivogt is a finishing plug made from rubber construction materials, and is suitable for sheet metal components. This device can also be used for holes with a thickness level ranging from 1.0 up to 2.5 ...

ISOTOP? SD steel spring vibration isolators have a resonant frequency of about 3 Hz 180 min-1 and are used for: Source isolation of ventilators, fans, extractors, air conditioners, compressors, emergency power units, pumps, etc. Receiver ...

Reinforced Polyamide, bush in nickel plated brass./

Diameter: 3 mm

How to use the tube plug: Sealing off leaky condenser and heat exchanger tubes without damaging tubesheets. Place correct size ring in tube. (Order by tube Outer Diameter and Gauge) Tapered plug is driven into ring, which is tapered on ...

Application: Cover and protective caps for the mounting screws of the K5.3 clamping modules.

Material Polyamide based technopolymer (PA), black colour. Standard executions ? RLT-HJ: joiningheader. ? RLT-HE: end header. Features and applications ? RLT-HJ header serves to bind tightly two ELEROLL rollers by engaging them (Fig. ...

Suitable for holes in materials of 1.0 - 3.0 mm thickness. Temperature range from - 40?C. to +130?C. Easy and fast installation with significant timesaving. Perfect fitting with sealing lip. Resistant to chemicals and weatherproof. Temperature ...

Screw plug with hexagon socket and conical thread. Metrical conical thread M 6 ? M 16 x 1.5 Whitworth pipe thread R 1/8 ? R 3/8

Threaded caps are used to close a connection. They have an internal thread. Sizes: G1?2 to 51?2? DIN 11 Material: brass, stainless steel, aluminium

High-Shrink-Ratio, Adhesive-Lined, Semirigid Polyolefin Caps Product Facts - 4:1 shrink ratio allows a few sizes to cover a wide range of splice and component diameters - Mechanically tough jacket provides strain relief and abrasion ...

The HB Series, manufactured by HOF Hydraulic, is a filler breather with filter. This filler breather is generally designed for being mounted directly on reservoir covers. In addition, it is fully furnished with flange gaskets, thus is ...

1

Material Polyamide based technopolymer (PA), black colour. Features and applications Realized to be used with RLT-U roller elements, RLT-CE containment edge needs for the lateral containment of light products handled on ELEROLL roller ...

Diameter: 30 mm - 60 mm

Diameter: 20.5 mm
Operating temperature: -50 ?C - 60 ?C

Screw plug with collar and hexagon socket. Metrical thread M 8 x 1 ? M 18 x 1.5 pipe thread G 1/8 ? G 3/8

Threaded plugs are used to close a connection. They have an external thread. Sizes: G1?2 to 51?2? DIN 11 Material: brass, aluminium

Semirigid, Flame-Retardant Polyolefin Caps Product Facts - 2.5:1 shrink ratio - Flame-retardant - Permanent or temporary method to terminate wires - Rapid, simple installation - Rugged protection against abrasion, vibration, and ...

END CAPS WITH VENTILATION For closing pipe ends. With ventilation.