Caps, plugs, technical plastic parts

The Garolla fittings by Morsello Inox are manufactured using high quality stainless steel of type AISI 304 TIG. There are different mechanical phases used during the manufacturing process, such as cold forging, turning and TIG welding. ...

The Threaded Plugs are ideally designed to provide a good quality performance and functionality for very specific purposes. They are specifically built with a levelling feet unit which is made out of several polyamide bases and stainless ...

Description To fit leveling feet to square, non-threaded tubes Material Bush: Nylon PA, glass filled reinforced Threaded insert: Nickel plated brass Color Black Pack Quantity 10 pieces Specials conductive, other sizes, other colors on request

The Stif open window is a metal inspection cover and plexiglas opening window. The base is secured using screws or crimped by four fold down tabs. Features a smooth convex outside cover, without retention. Can be quickly and safely opened ...

Diameter: 40 mm

Diameter: 18 mm

Diameter: 6 mm - 28.6 mm

700 Series End Cap, 3cc, Blue, (QTY=50), molded in polypropylene material. Design to seal inlet side of syringe barrel to ensure no contaminants come in contact with material during storage and shipment.

Diameter: 4.9 mm - 335 mm

To cover the end of the profile Material Nylon PA, glass filled reinforced Color Black Pack Quantity 100 pieces Specials conductive, other sizes, other colors on request

ORTAC Ventilation Plugs are IP68 rated and reduce the adverse affects of humidity in the environment by preventing pressure increase inside the enclosure and limiting temperature increase through air circulation.. IP68 / -40 +100 Plastic ...

Diameter: 18 mm

Diameter: 5 mm - 9.53 mm

Diameter: 4 mm - 7 mm

Applications: Isiflo coupling system for plastic pipes gives a tight and end-load resistant connection and can be used on: ? MDPE: BS6572 and BS6730 ? Black poly: All classes, and BS3284 ? Copper: Table X & Y ? Lead: BS602 and BS1085 ? ...

Diameter: 5.7 mm - 111 mm

Ortac ventilation plugs(pressure balance elements) reduce the adverse effects of humidity in the environment circulation by preventing pressure increase inside the enclosure and limiting temperature increase through air.

Blanking Screw for Ports of the FI-VS series facilitate the temporary and permanent closing of female threaded ports Suitable for nominal pressures up to 400 bar (depending on exact type and size) Designed with a four-fold safety factor ...

Diameter: 18 mm

Diameter: 24.2 mm - 118.8 mm
Operating temperature: 200, 60 ?C

Anvendelse: - ISIFLO threaded pipe fittings are threated pipe fittings for use with threat paste or teflon tape sealant. Dimensions: - From 1/8? up to 4? Material: - ISIFLO threaded pipe are produced in dezincification resistant brass. Fittings: - ...

Diameter: 1.75 mm - 120.65 mm

Blanking Plugs for Tube Ends of the FI-VSK series facilitate the temporary and permanent closing of tube ends Available in the Light and Heavy Series according to ISO 8434-1 / DIN 2353 Suitable for nominal pressures up to 800 bar (depending ...

Diameter: 14, 18 mm

Diameter: 22 mm - 108 mm
Operating temperature: 60, 200 ?C

Hexseal? and E-Seel? IP66 / IP68 Rated Hermetic Panel Sealing Boots for Unsealed and Sealed Toggle Switches, Pushbutton Switches, Rotary Switches and Rocker Switches. Tough, pliable Hexseal? and E-Seel? silicone rubber boots designed ...

Diameter: 4.19 mm - 88.9 mm

Brass, nickel plated blind stops are separeted from other cable glands due to the following characteristics; - Brass, nickel plated - Connection thread norms (DIN 40430 / EN 60423) - IP68 protection class - Nitrile butaidene rubber (NBR O-ring)

The TACON Series, manufactured by Sall, is a conical drain plug equipped with a rubber polymer structure to easily close the drain pipes. It has an available hook which is used for handling operations. The conical drain plug is used ...

Diameter: 35.2 mm - 50 mm

Operating temperature: 130, 60 ?C

Diameter: 4.4 mm - 12.5 mm

Toggle Switch Sealing Boots with Integral IQ* Mounting Nut Mounts over the Switch's Front Panel Mounting-Nut -Ideal protection against unforgiving environmental hazards ? prolongs switch reliability & life -Ideal for speedy retrofitting ...

AC Axle Caps are functional zinc finished top hat shaped caps for use with the dished push on fix type POFD products. They provide the designer with the opportunity of covering the exposed end of the shaft creating a smooth attractive ...

Operating temperature: -60 ?C - 200 ?C

Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines. Working pressure: 1,000psi (69 bar).

Diameter: 0.75 mm - 12 mm

Diameter: 0.5 in - 5 in

The A 118 SK is a loose steel dust cap, which is integrated with a fixing thread. It provides a fit of A 118. Other standard coupler models include A 118, A 119, A 418, A 134 N, and A 119 SK.

Stopping Plugs Series 8290/3 are ideal for sealing holes. They are designed with impact-resistant according to IEC/EN 60079-0 and IEC/EN 60079-7. They also have self-loosening protection. They are used in any kinds of weather. With its ...

Diameter: 14 mm - 25 mm

DAC Deep Axle Caps are functional zinc finished deep top hat shaped caps for use with the dished push on fix type POFD products. They provide the designer with the opportunity of covering the exposed end of the shaft creating a smooth ...

Diameter: 2 mm - 28 mm
Operating temperature: 246 ?C

For Ex e and Ex d enclosures Versions Metric NPT Thread sizes M16 ... M100 3/8" ... 4" NPT

Diameter: 14 mm - 25 mm

THREADED CAPS Material: Polyamide PA 6 Colour: Yellow

CAPS FOR COLLET KNOBS Elcom provides different types of caps that is useful to cover the head of the knobs. There are two types of caps available: Flat cap to cover the head of the knob Flat cap to cover the head of the knob with line ...

Diameter: 110 mm - 200 mm

Micro Plastics economical metric snap-in Poly-Plugs will close unneeded holes, wiring outlets, fill unused accessory openings, cover inspection, and production access holes.They can be used as tube end caps and protective bumpers. Metric ...

The 05280 series is constructed from black rubber and white polyamide materials. The protective cap is available in various models, such as the 05280-06, 05280-01, 05280-02, 05280-03, 05280-04, 05280-07, and 05280-05. The product range ...

Plastic caps are secured by pressing/knocking them into the core bores. Caps Zn and St must be secured with screws into the profile core bore. Plastic caps can also be secured in this way if desired. Radiused caps for the end faces of ...

Diameter: 0.5 in - 6 in

Operating temperature: 150, 120, 100 ?C

Operating temperature: -40 ?C - 110 ?C