Polymer seals

Temperature limit: -40 ?C - 200 ?C

Diameter: 8 mm - 32 mm

Temperature limit: -60 ?C - 230 ?C

These elastomers are a unique composite of high quality silicone and conductive microscopic particles, manufactured to strict formulations, yielding gasketing materials that meet nearly every military and/or electronic requirement. Metal ...

The JOINTEX? is a flange gasket made of high quality sheet of PTFE. The device consists of a comprehensive compressibility and elasticity for a high level of tightness. The device has an isotropic seal placed on the two directions. It ...

Moulded and pressure vulcanised parts made of silicone Shape and dimension fixed in accordance with the customer's requirements - sizes up to 500 x 500 mm Standard hardness is 40 Shore - other on request Standard colour ...

Temperature limit: -30 ?C - 120 ?C
Diameter: 3 mm - 45 mm

Temperature limit: -60 ?C - 230 ?C
Diameter: 80 mm - 250 mm

Mousse is a flat gasket made of soft closed cell expanded rubber, which is vibration damping and impermeable, making it suitable for heat and sound insulation. Easy to fit on all surfaces where a solid, safe and longlasting seal is required, ...

We have almost 20 compression packing grades for reciprocating pumps and rams. Between them, they will handle duties to well beyond 250bar on slurry pumps -- plus the unusual demands of massive water-powered rams for boat lifts on canals.

Diameter: 0.5 in - 12 in

Temperature limit: -30 ?C - 230 ?C

The PTFE provides different groove rings from different high performance plastics for the valve industry. They also offer ball seats, and seals with and without grooves, with a certain diameter or angle on the sealing side. These tools ...

Temperature limit: -45 ?C - 120 ?C

Temperature limit: -25 ?C - 120 ?C
Diameter: 32 mm - 150 mm

Temperature limit: -25 ?C - 120 ?C
Diameter: 32 mm - 150 mm

Ptfe CC manufactures a wide variety of components, which includes static seals. The static seals are available in four models such as unsplit, split, envelopes and as well as O-rings. A static seal is a sealing component that is ideal ...

O-Rings of the O-RING series are used as elastomeric sealings for selected male threaded studs and for various other sealing purposes (such as weld cones, flared cone adaptors, banjo bolts Used for male studs according to ISO 6149-2/-3 ...

The O-rings are solid that have recesses on outside and inside premises of application. It is lateral in both 45? angle on the outside and inside. They are coated and slotted.

Temperature limit: -210 ?C - 260 ?C
Diameter: 13 mm - 154 mm

The FEP/PFA encapsulated o-rings does not only adhered with the FDA and EU VO 1935/2004 standards, but also met the requirements set by the USP Class VI. The FEP/PFA fluoropolymers have been tested according to the USP Protocol. The products' ...

The CEJN High-Pressure Series comprises of various rubber metal seals. These seals are well suited for use with extensive pressure products. They are equip with a maximum working pressure amounting from 100 to 150 MPa.

WEICON DF 175 is a patented thread sealing cord made of 100% PTFE that seals almost all metal and plastic threads permanently and safely. WEICON DF 175 reliably compensates the intermediate space on the threads and creates a PTFE film ...

Boca Bearings presents oil seals. They feature a flexible lip, which rubs against a shaft or an enclosure. This prevents fluids and debris from getting leaked or contaminated. For correct installation, it is important that the seal lip ...

memory packings are single- acting sealing elements with excel- lent sliding properties. They are used primarily for sealing reciprocat- ing pistons and rods as well as for rotary and swiveling applications. The one-piece seal is ...

novaflon ? is the family name of Frenzelit?s latest product range based on modified and multi-directional expanded PTFE materials. Its improved performance compared to conventional PTFE and its superior chemical resistance completes our ...

No stick-slip even with low sliding speeds Extremely low breakaway forces even after prolonged downtimes Low wear and long service life Good sealing performance due to several sequentially located sealing edges High operating reliability ...

novaform ? 2300 is based on an ingenious raw material blend of high-quality aramid fibres, special functional fillers and synthetic NBR. The new material combines the characteristics of fibre gaskets with the positive properties of ...

A diaphragm is normally used to reliably separate different media or spaces with different pressures. One of the main requirements is chemical resistance to aggressive media. Precisely defined flexibility and a long service life are also ...

The high pressure gasket material for extreme mechanical applications, such as in exhaust pipes or exhaust turbochargers. The matrix from aramid fibres, NBR binder and special agents is reinforced with a galvanised steel wire insert made ...

Diameter: 15 mm - 600 mm

Rotary Shaft Seals made from PTFE offer outstanding properties for reliable selaing of rotary shafts. We offer various types of Standard Rotary Shaft Seals. HN 2390, HN 2580 and special types according to your application.

Our range of oriented wire in silicone rubbers combine excellent environmental protection with a high level of EMI shielding effectiveness. These most versatile of shielding products incorporate a matrix of vertically oriented wires which ...

PTFE Pisten Seals PTFE Rod Seals Spring-energized seals and memory packings are always the ideal choice for sealing static or moving pistons and rods. ElringKlinger Kunststofftechnik offers a broad range of standard products, supplemented ...

Our E Range gaskets are constructed from silicone containing metal powder fillers which combine to produce high levels of attenuation with excellent environmental shielding and a high level of conductivity. Many types of filler, from ...

PTFE Seals Guides for Piston Compressors Environmentally Compatible Sealing even without Lubricant Seals for dry-running applications are currently a focal point of technical development. They significantly reduce a machine?s operating ...

In addition to the manufacture of gaskets for electromagnetic shielding, we offer a wide range of non-conductive gaskets. These can be used in applications where an environmental seal against dust and/or liquid ingress is required. For ...

These EMI Shielding Gaskets are realized covering one soft foam of Polyurethane, Silicone or Neoprene with conductive polyester woven (Nickel or Tin-Copper electroless or galvanic deposit on all single polyamide yearns and then weaved). ...

Temperature limit: -10 ?C - 100 ?C
Pressure limit: 1 bar - 16 bar
Diameter: 20 mm - 600 mm

S698-2RS Rubber Seal Bearings /SUS420 Steel / for?kitchen appliance Bearing Model: S698-2RS Rubber Seal Bearings Size: 8x19x6mm Material: SUS420 Steel Weight: 0.0075g Description S698RS Rubber Seal Bearings have more rust-proof and ...

LUBRIKUP? RESISTOIL flange and split rings are made from a special composition of neoprene and cotton duck. Engineering a composition ring that resists swell was another LUBRIKUP? first.

The EPDM Model is a rubber sealing strip developed by Yonsha. This strip is belongs to spare parts of circle-producing suction cups. In addition, this product is based to the quite rough work pieces including concrete objects,fire bricks,rough ...

Temperature: 500 ?F
Pressure: 800 psi

Elastic tape made of pure 100% PTFE. Available round and rectangular profiles, with a self-adhesive layer, width form 3 to 40mm. This material has wide range of application as easy to use seal, can be used in chemical, food, pharmaceutical ...

Our wide range of polymer-coated fabrics custom is designed for vapour seal applications and manufactured to meet the demanding challenges of evaporation, storage and pressure containment in the petroleum, petrochemical and gas distribution ...