Polymer seals

Temperature limit: -30 ?C - 120 ?C
Pressure limit: 25 bar

Temperature limit: -100 ?C - 225 ?C
Pressure limit: 0 bar - 90 bar

Conditions of use: Type FP.K gaskets must be used in working conditions within the following limits: - Pressure: 0 to 400 Bar; - Temperature: -35 +110?C; - Speed: max 0,5 m/sec. Please contact our engineering department if you have particular ...

Diameter: 2 mm - 10 mm

Evelope gaskets introduction The G.GLASS range of envelope gaskets has been designed specifically for supplying producers and users of enamel coated reactors with gaskets featuring perfect chemical inertness and high deformability ...

Temperature limit: 150 ?F - 300 ?F
Pressure limit: 10 bar - 24 bar
Diameter: 4 in - 30 in

Diameter: 7.65 mm - 17.17 mm

Wind energy as a power source is favored as an alternative to fossil fuels, as it is plentiful, renewable, widely distributed, clean and produces lower greenhouses gas emissions. More and more large scale wind farms are installed in ...

Temperature limit: -40 ?C - 130 ?C

The packings in polyurethane type FS are indicated for the sealing on rod with asymme-tric lips. The assembly of gaskets type FS for rods is not particularly difficult because the material is elastic and highly tear resistant, which eliminates ...

Diameter: 0 mm - 2400 mm

The OCEAN flat strip for gaskets is made up of 100% pure PTFE material transformed into a fibrous molecular structure thanks to a particular process. The result is a product featuring a particular combination of properties: - High plastic ...

Silicone Sealant is a high performance neutral one component silicone sealant with anti-mould protection. It has good adhesion to concrete, masonry, metals in general, glass, ceramics, wood, coated surfaces, polymetilmetacrilate, polycarbonate, ...

Temperature limit: -30 ?C - 105 ?C
Pressure limit: 250, 150 bar

Temperature limit: -40 ?C - 120 ?C
Pressure limit: 0 Pa - 5000 Pa

Supplied cut to the proper dimensions recommended for disk size and/or holder provided. Stocked in the following materials: Neoprene, Garlock 3000, PTFE, and PTFE Envelope. Other materials available upon request

Effective dynamic sealing has to strike a balance between maximum sealing force, to prevent leaks, and minimum friction and wear. Repack-S seal designs achieve this. They provide a leak free barrier between moving and stationary surfaces ...

Temperature limit: -60 ?F - 450 ?F
Diameter: 0.24 in

Eberhard can supply gaskets in different materials and thickness to use with our latches to help water and debris from entering your door compartments and protecting your valuable items inside. Whether you are looking for EPDM or rubber ...

Saratoga Neutral is a high performance neutral one component silicone sealant. It has good adhesion to concrete, masonry, metals in general, glass, ceramics, wood, coated surfaces, polymetilmetacrilate, polycarbonate, hard PVC, ABS. ...

Temperature limit: -30 ?C - 100 ?C
Pressure limit: 250, 400, 150 bar

The Orobica Plast-Gom is capable of producing gaskets specifically for butterfly valves. It is equipped with set of joints with accordance to the DIN-ISO -CLAMP-S.M.S.-BS -IDF standards, for alimentary, pharmaceutical and chemical industries. ...

Temperature limit: -40 ?C - 120 ?C
Pressure limit: 0 Pa - 50000 Pa

One example of Repack-Ss innovative approach to dynamic sealing is DANASPTEP? HF. High frequency, hydraulics cylinder operation is particularly demanding on seals. Traditional wedge-profiled PTFE composite seals are prone to early failure ...

Diameter: 16 mm - 110 mm

Diameter: 13 mm - 61 mm

The Migutec? profile is utilized for the division of floor surfacing into particular fields. It is also efficient for the dissipation of stresses. Also, the unit is suitable for use in field-limiting or in contraction joints. In ...

Temperature limit: -268 ?C - 260 ?C
Pressure limit: 200 bar

The ROR series is a unit manufactured by Heyco company. It is applicable on fittings mounted in non-threaded holes. The liquid tight, dust tight and oil tight at enclosure conforms to the units suitable for wet locations requiring a separate ...

Temperature limit: -40 ?C - 100 ?C
Pressure limit: 0 Pa - 2000 Pa

Lauren can deliver a complete line of custom molded polymer products...dense, sponge, rubber-to-metal-bonding and more. EPDM Neoprene TPU Fluoroelastomer SBR Nitrile Silicone

Rotary sealing is one of the most common applications for Repack-S seals, from oil and gas turbo-compressors, race engines to large hydropower valves and industrial pumps. application rotativebdRepack-S supplies mechanical seals, lip ...

FP80V will have cross-link reaction with other reactors when the peroxide is taken as the cross-link agent. FP80V FK5 is good for resisting the following substances: Alkali ATF fluid High temperature steam Amine group ...

Diameter: 10 mm - 100 mm

The Hyhydrotite? is manufactured by mageba, and is a hydrophilic elastomer that has been developed base on chloroprene rubber. The unit has the capability to stretch due to hydrophilic polyurethane resin that is inseparably fused to the ...

Diameter: 0.24 in - 2.34 in

Temperature limit: -40 ?C - 100 ?C
Pressure limit: 0 Pa - 2000 Pa

EPDM is one of the most popular, versatile polymer products on the market. These sealing solutions can be found in applications ranging from basic commodities such as hoses, belts and o-rings to complex, highly engineered seals for automotive, ...

The Repack-S DANA range offers a wide range of rotary sealing options. Of particular note is the DANAROTO? seal. It comprises an inner polymer pad with multiple radial sealing grooves in contact with the rotating shaft, and an elastomer ...

It is manufactured for project based IP protection.

Made of BUNA-N 70 durometer rubber compound. Creates a tight seal for fluid or gas connections.

Temperature limit: -30 ?C - 100 ?C
Pressure limit: 0 Pa - 2000 Pa

Pneuma-Cel bladder clamps provide a different way to handle common clamping and actuating needs. Constructed of a high quality, durable EPDM rubber, Pneuma-Cel bladder clamps allow for soft, conformal clamping of delicate and/or irregularly ...

Addix, an Axon group subsidiary, is specialised in the manufacture of elastomeric parts and components with materials including natural rubber, silicone, NBR, FKM, EPDM, Butyl, FDA compounds and aeronautics approved compounds for any ...

Temperature limit: -200 ?C - 260 ?C
Pressure limit: 86 bar

Bal Seal originally developed the spring-energized PTFE seal to meet cryogenic requirements in the aerospace industry. Since that initial success, the company has continued to develop both materials and canted coil spring technology to ...

Timken Light-Duty Seals has a wealth of knowledge and experience in the automotive bearing industry, and has used that knowledge to develop a series of light duty oil seals that are exclusively manufactured for Timken in some of the ...

The JOINTEX? is a flange gasket made of high quality sheet of PTFE. The device makes the mechanical properties isotropic in the plane of the seal. The gasket can resist creep and optimum sealing capacities even on a high temperature. ...

Temperature limit: -30 ?C - 120 ?C
Diameter: 7 mm - 20 mm

Sheet gasket made from 100% pure virgin expanded PTFE with fibrillated micro structure biaxially oriented. Full chemical resistant, highly compressible, cold flow and creep resistant. It perfectly works on damaged or irregular surfaces ...

Our static/face seals are available in a wide variety of materials and sizes including very small cross sections from 0.020 in. (0.5 mm) and bi-directional designs. We offer a wide range of chemical and temperature capabilities and custom ...

Temperature limit: -24 ?C - 106 ?C

The JOINTEX? is a high quality flange gasket made of PTFE glass fibers. The device provides mechanical properties that enables a high sealing capacity. It is unaffected by ageing caused by light or atmospheric agents. It can also be operated ...

Different types of PVC sealing strips (yellow or grey) to be used with tubular aluminium profile EPR1.

Temperature limit: 0 ?C - 200 ?C
Pressure limit: 0 bar - 50 bar

Temperature limit: -40 ?F - 225 ?F

Sheet jointing for flat gaskets, made of modified PTFE reinforced with heat resistant filler. The modification of the molecular structure of the polymer and a special production process that determines the isotropic orientation of the ...