Rotary seals and shaft seals

The Spring Series comes with a minimum compression force and high resiliency gasket. It is built from Beryllium Copper, Stainless steel, Tin Copper Clad Steel materials. This unit features 90% free height recovery when deflection achieved ...

Timken has developed a high efficiency over the decades by determining seal performance along with enhanced innovative sealing. Several combinations of bearing assemblies such as AP-2? makes it the most essential component affecting the ...

Diameter: 0.5 in - 5 in

The MIGUTRANS? FSN is a shaped seal, manufactured by mageba. This product is ideal to use for retrospective installation, specifically during in refurbishment and renovation applications. It also offers surface mounted connection plates. ...

Temperature limit: -55 ?C - 200 ?C

Made of BUNA-N 70 durometer rubber compound. Creates a tight seal for fluid or gas connections.

Rotary sealing is one of the most common applications for Repack-S seals, from oil and gas turbo-compressors, race engines to large hydropower valves and industrial pumps. application rotativebdRepack-S supplies mechanical seals, lip ...

Soprima presents sealing resins. The products are chemically passive. The resin enlarges in the assembly when mounted and provides an immediate sealing. The sealing is useful for several applications. These include sealing of screws, ...

Oil Seals Oil seals ? often called grease, fluid or dirt seals ? close spaces between stationary and moving components in mechanical equipment, helping prevent lubricant escape. They also stop harmful contaminants from entering machinery, ...

Temperature limit: -50 ?C - 200 ?C

We can provide plate heat exchanger gasket of all types and all brands.

Temperature limit: -55 ?C - 200 ?C

Temperature limit: -120 ?C - 500 ?C
Pressure limit: 2 bar
Diameter: 40 mm - 340 mm

Temperature limit: max 100.0 ?C
Pressure limit: max 50000.0 Pa

The Repack-S DANA range offers a wide range of rotary sealing options. Of particular note is the DANAROTO? seal. It comprises an inner polymer pad with multiple radial sealing grooves in contact with the rotating shaft, and an elastomer ...

HDL? Seals This close-clearance designed seal never touches the mating surface. Its benefits include lower torque, lower temperatures and better fuel efficiency with fewer set outs, higher service speeds and lower operating costs than ...

It is manufactured for project based IP protection.

Temperature limit: -120 ?C - 800 ?C
Pressure limit: 20 bar
Diameter: 40 mm - 340 mm

Our static/face seals are available in a wide variety of materials and sizes including very small cross sections from 0.020 in. (0.5 mm) and bi-directional designs. We offer a wide range of chemical and temperature capabilities and custom ...

Temperature limit: max 100.0 ?C
Pressure limit: max 50000.0 Pa

Addix, an Axon group subsidiary, is specialised in the manufacture of elastomeric parts and components with materials including natural rubber, silicone, NBR, FKM, EPDM, Butyl, FDA compounds and aeronautics approved compounds for any ...

This instrument is a seal developed by anvis Industry. It is designed to have a large diameter. In addition to that, the molded parts of this seal can have a diameter that can react at most 72 inches. Furthermore, the seal is equipped ...

This products offers edge protection and sealing, with roll length of 20.0 m. 1 Box = 20.0 m

This is an EPDM gasket manufactured by Beisit Electric Co. which comes with various types. This includes PG type, M type and NPT type O ring. This specific tool comes with a working temperature of -50 ? to 150 ?. Also, it comes with a ...

Temperature limit: -40 ?C - 85 ?C

Parker?s ability to supply metal to rubber bonded seals has expanded into the dynamic seal market with the addition of bonded piston seal technology. Specific to transmission applications with temperatures in excess of 300 degrees and ...

The Sealflex Jointing are composed of cellulose and mineral fibers, as well as fillers. The unit is made from NBR, which is based from an elastomer binder. The device provides a working temperature for steam at 120 ?C, and 150 ?C ...

The quality charter (ISO 9001 Certification) and the respect of the specifications that are determined in partnership, guarantee the quality of our prestations. If customers require a flat seal for the new product, Jicey provides you ...

Metric Ring Seal: NBR 90, Black Item Code: 490100 Black NBR 90 Metric Ring Seal protects against fluid and gas loss while resisting oils and chemicals. In Stock! Free sample available Description Quantity Unit Price Options Ring Type ...

UV Curing FORM-IN-PLACE (FIP) and CURE-IN-PLACE (CIP) Gaskets DYMAX form-in-place (FIP)/cure-in-place (CIP) gaskets cure completely in seconds - even to 1/4 inch thick beads - with good compression set. UV/Visible light curing, FIP/CIP ...

Loctite Gasket Eliminator is a non-corrosive, anaerobic sealer designed primarily for use on aluminum, iron, and steel flanged mating surfaces. Gasket maker fills gaps of up to 0.050" and forms a flexible, solvent-resistant seal that ...

Temperature limit: -35 ?C - 100 ?C
Pressure limit: 450 bar
Diameter: 20 mm - 499 mm

Diameter: 8 mm - 32 mm

Providing Plastic to rubber seals for sealing solutions in void volume and edge molded configurations. Currently suppling OEMs in a variety of applications (i.e. oil pan, intake manifold, valve cover, air breather gasket, etc.) In addition ...

The Texoil Jointing is composed of aramidic fibers, and heat resistant fillers. The unit is bound with NBR, and has a high acrylonitrile content. The device is suitable for use in different applications involving gas, oil, hydrocarbon, ...

Material: EPDM Nominal pressure: 10, 16 bar Nominal diameter: 32-600 mm Operation temperature range: -10...+90?C galvanized carbon steel flanges easy to install flanges drilled according to EN-1092-1

Temperature limit: -54 ?C - 200 ?C
Pressure limit: 41400000 Pa
Diameter: 1.93 mm - 405.75 mm

Temperature limit: -60 ?C - 180 ?C
Diameter: 1.6 mm - 4.8 mm

Dymax GA-145 is a UV/Visible light-curable Form-In-Place/Cure-In-Place (FIP/CIP) Gasket formulated for fuel cell, automotive door handle, appliance housing, and critical electronic assembly and device applications which require a soft, ...

Pipe Thread Sealant is a single component, high viscosity, low strength acrylic threadlocking adhesive. It cures in the absence of air between close fitting metal surfaces, has high lubricating properties, prevents galling and resistance ...

Temperature limit: 0 ?C - 80 ?C
Pressure limit: 300 bar
Diameter: 56 mm - 480 mm

Temperature limit: -30 ?C - 120 ?C
Diameter: 3 mm - 45 mm

PREMIER? EMI Shielding Thermoplastic are made from quality materials, providing exceptional electromagnetic shielding for your equipment and devices. Low density and high flexural and tensile strength, it is highly conductive and has ...

DESCRIPTION High quality compressed jointing consisting of aramidic fibres and heat resistant fillers bound with NBR with a high content of acrylonitrile. Complies with the standards: DIN 28091 FA-A1-0 and BS 7531 class Y. APPLICATIONS Used ...

Material: EPDM Nominal pressure: 16 bar Nominal diameter: 20-80 mm Operation temperature range: -10...+90?C galvanized iron thread easy to install

Temperature limit: -54 ?C - 325 ?C
Pressure limit: 10000000 Pa
Diameter: 1.93 mm - 405.75 mm

1400 Series Miniature EMI / RFI shielding gaskets This is a very small EMI / RFI shielding gasket, used for EMI / RFI shielding on for example PCB?s, smartphones and other applications where little space is available. Miniature EMI ...

COG is absolut uncompromising with the quality of their products. Because this is the reason why our clients are among the best in their respective industries. COG delivers Europe's largest O-Ring stock (over 45,000 items in stock) most ...

KLINGERtop-chem-2000 Ultimate chemical resistance and mechanical durability combined in one material. The PTFE-gasket, which does not flow: merely 1,6% thickness loss at a surface pressure of 50 MPa and a temperature of 200?C! Basis PTFE ...

Designed as solid and hollow strips Chomeric extruded conductive elastomer gaskets come in a number of different cross section setups. Their size goes from 0.060 inch (1.5 mm) diameter hollow "O" to 2.00 inch (50.8 mm) wide ribbon ...

Asbestos-free, high quality sheet jointing consisting of aramidic fibres, lamellar graphite, fillers and NBR binder. The plates of graphite enable the layers of material to slide one on top of the other, guaranteeing in this way a particular ...

General GFD metal O-rings have been developed as a secure sealing of gases or liquids. They even can be used in case of extreme conditions. These static and metallic sealing elements can be applied in ranges of ultrahigh vacuum and up ...

Temperature limit: -54 ?C - 200 ?C
Pressure limit: 35000000 Pa
Diameter: 47.42 mm - 405.75 mm

Standard Roll lenght is 50 m Please contact with Mesan for different sizes

This one-sided self-adhesive sealing tape is specifically used for frames that needs sealing on solar thermal collectors. This tape is made from a smooth EPDM cellular rubber. It is designed with an excellent adhesive characteristic, ...

COG has a huge selection always in stock. In addition, we?ll manufacture lots of things you won?t get elsewhere, on request specially for you. In the shortest possible time. At the fairest of prices. As a one-off order or as a batch. Customized ...

Maximum chemical resistance and tightness even with low surface pressure. This product is characterised by outstanding surface adaption with low surface pressures and extremely high tightness (German Clean Air Act). Ideal for use with ...