Other fasteners

The Plastic fastener, manufactured by BULTE?, is made using the polymide nylon material. It can also be made using ABS, PA6, PA6.6, PP, PE, PVDF, POM, PC and PTFE upon request. The standard color is white while other colors are available ...

Practical: wide opening to substitute for several sets of pliers. Ergonomic with very large handles for a better grip Fast with a fast locking button for accurate adjusting. Extra-wide opening, up to 30% wider than typical pliers: ...

Plastic Snap Fasteners are ideas for fixing corrugated panels. The Snap Fasteners are supplied in white or black polyethylene, in 15mm or 30mm head diameter

Height adjuster, PA-GB, grey, similar to RAL 7042 Basic unit, PA-GB, grey, similar to RAL 7042 Button-Head Screw T4x12, St, bright zinc-plated Square nut DIN 557-M5, St, bright zinc-plated

- Material: special cast iron with steel alloy - Wear-resistant surface - Clamping and base surface machined to DIN 876/III - Clamping surfaces are rectangular - Edges machined rectangular - Clamping surface with clamping slots - ...

Specifications Construction Heavy duty steel System Board SBCs Expansions Support up to 4 half-size cards Drive Capacity One 3.5" drive bay (exposed) One 3.5" drive bay (internal) Cooling One 90mm cooling fan Dimension(mm) ...

Made from class 35-40 cast iron. All ends machined square and parallel within 0.002" per 6". Extra thick ribbed construction. Ground finish - square and parallel within 0.0005" per 6" on the two working faces only. Machined finish ...

Width: 18 in

The quickest way to fasten a panel. The Panel-Fixing Profile is pushed onto a Profile Tube D30 and slotted onto a panel element that is between 3 and 5 mm thick. Thats all there is to it! Fitting these profiles around all the edges of ...

- Material: special cast iron with steel alloy - Wear-resistant surface - Clamping and base surface machined to DIN 876/III - Clamping surfaces are rectangular - Edges machined rectangular - Clamping surface with T-slots according ...

The JKF2, JKFS2,KF2, and KFS2 models are broaching type fasteners developed by Shanghai Jingyang. They are made from carbon steel as well as from stainless steel materials. These fasteners are equipped with threads in the sizes of M2, ...

Non-Metallic modular cable hanger system. The hanger material is a high strength nylon especially formulated to meet the requirements of the London Underground 1-085 specification. Independent testing is carried out to prove conformance ...

Width: 9 in

The CES offers an array of cable tray fastening accessories with a bendable design feature. This, in turn, allows it to deliver convenient installation without requiring tools nor cutting. In addition, these trays are delivered flat making ...

Octolok studs and nuts are Grade strength fasteners designed to provide external or internal threads in the most demanding applications including light gauge sheet materials. Octolok fasteners improve quality & reliability, simplify ...

Jingyang KFB3 are high quality fasteners that you can use with various industry applications, in particular because of their push out resistance. In addition to the fact that they are applied for stacking of spacing PC boards with threaded ...

Micro Plastics' Two Piece rivets are designed to fasten larger components or small assemblies to their mating panels. Pressing or tapping the screw through the body creates a secure insulated connection. In addition the screw may be removed ...

Specifications 19-inch 4U height rack 8-slot 6U cardcage 80mm VITA 36 rear I/O bay VITA31, VITA38 backplane Front-Rear cable way Front or rear door 700W PSU versatile design The R4U8S is a 4U height 19?? ...

Kunze POWERCLIP? are ideal components for integrated heat management solutions: optimum thermal interaction of transistor clips, interface materials and heat sinks through intelligent clip design. Ideal application-specific design based ...

Pandora is a compact, light weight, rugged enclosure system for Diamond Systems? PC/104 form factor single board computers. Pandora offers a unique approach to packaging by eliminating most internal cables. This speeds up the assembly ...

Micro Plastics' Micro Wire Clips are molded in Nylon 6/6 material. They can be used on densely packed PC boards or any other limited space applications. Holds up to ten 26 gauge wires (1/32 outside dia.). Wires install easily by pressing ...

The VH2304 is a long vertical holder that is manufactured by MM Engineering. The unit is suitable for mounting a long positioning table, or a lifting table. Its assembly is perpendicular to the mounting surface, e.g. Z-axis. The unit ...

Specifications 19-inch 8U height rack 16-slot 6U cardcage 80mm VITA 36 rear I/O bay VITA 38, VITA 31 backplane Front-Rear cable way Front door 1200W PSU versatile design The R8U16S is a 8U height 19?? ...

Techn. Data / Items supplied : 1 Connecting element, zinc plated 1 Fillister self forming torx screw T40 Weight 0,020 kg Power-Lock fastener 30 (standard) part no. 21.1014/0with hex socket cap screw SW5 Applications ...

Pandora provides a fast, light, rugged, and flexible enclosure solution for PC/104 systems. In the Pandora concept, one end cap comprises a base plate on which you construct your PC/104 stack and attach cables. Once your board and cable ...

Fasteners, including bolts, nuts and rivets, are mechanical components used to fasten one object to another.

19" rack mount industrial chassis Specifications 19-inch rack 4-slot 6U cardcage 80mm VITA 36 rear I/O bay VITA 38 backplane Front-Rear cable way Front or rear door 400W PSU versatile design The R2U4S ...

Master-Plate is a very simple system that can take advantage of the help of various adhesives, fixing most kind of materials. The first impressive aspect is the fact that the item does not require any particular mechanical preparation, ...

The 441.689 stainless steel diamond anchorage point is designed to be permanently installed on a structure so that an anchor device, or personal protective equipment can be attached to it, facilitating safe working at height. The padeye ...

Rugged Chassis 10/12/18-slot 6U VME/cPCI Specifications 10, 12 & 18-slot versions VME 64 (3-row), VME64X with J0 (5-row) and cPCI options Dual redundant power suppliers available Health monitoring system available ...

The DEWE-30 series signal conditioning chasses is available for all modules belonging to the Dewetron signal conditioning series. When a DAQP dynamic isolation amplifier module has been installed, the chasses will manage to offer a conditioned ...

In-deck Loop padeyes are recessed into the mounting surface creating a discreet, low profile design. Lightweight and compact, our padeyes work well with almost any soft-attach pulley, including Black Magic Loop blocks, Snatch blocks and ...

Captive fasteners are screws, nuts and studs that, after being inserted in a panel, can?t be lost since they are pressed-in or fixed with retainers. A particular kind of captive fasteners are quarter-turn fasteners, marked by quick access ...

1/2 Short ATR 5-slot Conduction Cooled Chassis Specifications Superior cooling characteristics 1/2 -short ATR chassis suitable for MIL-STD-5400 Class 1 environments Provides 5-slots for conduction cooled circuit cards per ...

These are clamps for fi?xing pro?xi?mi?ty swit?ches ac?cor?ding to EN 50025 and 50037. Metal parts have to be used from the stan?dard pro?gram?me of se?ries A ac?cor?ding to DIN 3105. When moun?ted on moun?ting rails, the sen?sors can ...

Width: 421 mm
Length: 176 mm

The plastic fastener is specifically used in thread locking and sealing. Manufactured by INSERCO, the fastener gives many supplementary functions such as adhesive bonding, anti-break loose, anti-thread stripping and anti-seize. The ...

This product manufactured by Sugatsune Kogyo is typically used for assemblies where the slide-in method is not feasible. Its compact, lightweight, and versatile drop-in design automatically aligns itself to the assembly, and utilizes ...

HSRS steel clamps are sui?ta?ble for re?tro?fit?ting on all mo?bi?le hy?drau?lic sys?tems and allow a vi?bra?ti?on-free lay?ing of tubes and hoses. The as?sem?bly with a se?pa?ra?te noise pro?tec?tion in?sert is a high?ly ef?fec?tive ...

Width: 433 mm
Length: 253 mm

Inserco manufactures a wide variety of fixation systems which includes sheet metal fasteners, rivet and clinch nuts, clinch studs and as well as standoffs. The IPFH series of Inserco is a self-clinching flush head stud that is available ...

The stainless steel angle bracket is used for applications where corrosion is an issue.

Two-pie?ce wel?ded con?struc?tion clamp for fi?xing by wel?ding and for fi?xing an?chor bolts of sin?gle or dou?ble ver?si?on. Tube sup?ports have a noise and vi?bra?ti?on pro?tec?ting ef?fect and thus make an im?portant cont?ri?bu?ti?on ...

INSERCO has vast experience in precoating domain which delivers various types of methods and operations in fixing various materials. The type of fixing we provide are adhesive bonding, anti- break-loose, anti-thread-stripping, sealing, ...

The FLEX-LOC screw insulation piece is offered in various types that can be used for structure-borne noise damping mounts for sheets, frames, motors, ventilators among others. This is available in different materials including brass ...

Fi?xing clamp for pro?xi?mi?ty switch ac?cor?ding to EN 50025 and 50037. Metal parts of the stan?dard pro?gram of se?ries A ac?cor?ding to DIN 3105 have to be used. The sen?sors can be ad?jus?ted axi?al?ly and la?te?r?al?ly when moun?ted ...

The Broaching Fastener is manufactured by Inserco. The product is made of various types of materials such as printed circuit boards, polycarbonate, acrylics, resins, epoxy etc. The product delivers durable and reusable thread and it is ...

The RoHS has a natural rubber material elastomer. It has a connecting piece that is chromated and galvanized. It has a hardness of 80 and ?5 Shore A that conforms to the EU guidelines of 2002/95/EG. The unit is usually used as a screw ...

The clip+ready sys?tem! Tube sup?port, ad?ap?ter, clip and worm thre?ad clamps enable dif?fe?rent prac?tical as?sem?bly com?bi?na?ti?ons on hy?drau?lic cy?lin?ders. As?sem?bly of tubes and hoses of dif?fe?rent dia?me?ters can be com?bi?ned. ...

Features & Benefits Durably etched, hard-chrome-plated blades are rust resistant and made to last 12" square has precision-machined working surfaces for improved accuracy Built-in scriber comes in handy for surface marking ...

There are different standardized components that can be used for safe and functional design in any construction. These machine elements are made either in stainless steel or steel. The surface protection can be selected. It can either ...

Standard steel anchor composed of a COEUR STEEL hanger, a bolt and a nut, designed for interior uses or non-permanent installations. It is available in 10 and 12 mm diameters. Description Economical choice for low-corrosion environments Assembly ...

The Mbo Taper keys, a series of product from a robust and comprehensive linking technology, offer a wide array of components that provide functional and safe design to any types of machine elements. These taper keys are available with ...

The Racal Instruments? 1263HPr VXI 4.0 high-power 13-slot mainframe allows you to leverage the speed and power of the newest VXI 4.0 standard. The high-power and cooling capability make it ideal for housing the latest generation of high-performance ...