Other fasteners

Three-Face Granite Tri-Squares provide an excellent, economical way to check X, Y and Z axis alignment on CNCs and CMMs. They can also be used in the same way as a steel square for direct checking of squareness and straightness.

The tolerance compensation systems by FLEXITOL were developed to compensate for tolerances in solutions of type economical assembly, which ensure a safe sequence in the series production. These items come with a robust yet durable design ...

Material: Stabilised GJL 250 grey cast iron On request: Other slot widths available.

Gas Spring End Fittings & Mounts - Flat Mounting Bracket are fittings to position gas strut in place

The QUICKLOC? quick release is inexpensive and requires little maintenance, making it ideal for many applications. It is easily configured, eliminating the need for complex tools and is resistant to corrosion and vibration. This light ...

Delavan Spray Technologies offers a wide variety of accessories that are ideal for pulverization systems and applications. Available units include assembly-joined directional filter collars, pipe regulation support and pressure cam connections. ...

Size Range 3/4? through 10? Material Carbon Steel acc.to the MSS SP 58-TABLE A2/A2M Service Designed to suspend non-insulated stationary pipes and Sprinkler system installation Installation Vertical adjustments are ...

These modular platforms from Elma are designed with type 14V, 2U enclosures for desktop and rackmount VITA system applications and built to meet eurocard and IEEE standards. These high quality units are manufacutured with an attractive ...

Width: 166 mm
Length: 175 mm

Adjustable Swivel Ring Steel Band Hanger Size Range 3/4? through 10? Material Carbon Steel acc.to the MSS SP 58-TABLE A2/A2M Service Designed to suspend non-insulated stationary pipes and Sprinkler system installation. Installation ...

3M? Fastener SJ3572 Hook is a hook fastener supported with a high efficiency acrylic adhesive built to satisfy high-temperature resistant applications. This hook fastener is made with a PSA nylon hook incorporated with a transparent ...

Elma's Variety 14V, 3U enclosures supplies a top quality, modular program for product packaging Pc or Rackmount VITA Program programs. Made to IEEE and Eurocard specifications, Method 14 Enclosures come with an appealing finish off and ...

HARDENED SQUARES Execution acc. to: DIN 875/00, finely ground and lapped.

The Adjust-O? are magnet squares from Strong Hand Tools. They provide a quick and easy holding of metal pieces at a 45? or 90?angle. It is integrated with on and off switches that provides a fast and safe installation. Simply turn the ...

3M? Dual Lock? Reclosable Fastener SJ3442 is an automotive element that turns down solvents, contamination, and high temperature. It has 170 stems per square inch with an employed width of 0.16 inches, and a resounding snap which indicates ...

Width: 196 mm

To fix two or three tubes/wires to a panel with holes With a pre-assembled rivet system High pull out resistance

The Elma Type 14V, 4U enclosure has a modular and high quality structure that provides a platform for packaging rackmount VITA system or desktop applications. Its design meets the standards set by the IEEE and Eurocard. The enclosure ...

PRECISION BEVELLED EDGE SQUARES, WITH BACK DIN 875/00, stainless steel, with heavy base and thin blade, finely ground and lapped.

The Grid-and T-slot plate is GG 30 normalized including the cover and transport screw. The module includes 100Cr6 heat treated bushings. the grid spacing is ? 0.02 mm with 40 mm, M12 / 50 mm, M16. The module is available in standard ...

Width: 82 mm

Brand Name : Slot 10Puller Type Angle Connection - DoubleSlot : 10 Meterial : Aluminium Applications : Profile Connector Place of Origin : Turkey It is used for connecting two profile with their front side by pulling method. It provides ...

Designed to deliver top-class performance even in harsh environments like shipboard, airborne, and ground mobile applications is the Type 12R2, 8U, 19" Rackmount, MIL-Rugged, Top Load. Super cooling and space efficiency offered with top ...

Broaching nuts are used with printed circuit boards and other hard or brittle materials. In addition, they can be used on materials too thin for threading, such as acrylic and polycarbonate panels. Advantages : Provides permanent ...

The Lindapter? Hollo Bolt Type HB. is a device made of steel and is hot dip galvanized as well.

To position the ball catch versatile Material Steel Surface Zinc plated Pack Quantity 10 pieces Specials Other surfaces, other colors on request

Brand Name : Slot 10 Puller Type Angle Connection - Single Slot : 10 Meterial : Aluminium Applications : Profile Connector Place of Origin : Turkey It provides connection between degreed cut profile and other profile surface. It presents ...

The 9U, 12R2 is customized to withstand environment hazards of shipboard, atmospheric and ground mobile operations based on MIL-STD?s. This device is a personal computer based chassis that offers applications for COTS hardware intended ...

This fastener is developed by CCB Composants. It comes with either male and female spacer with undercut or with round/hexagonal coupling nuts. The sizes available for this fastener with spacer ranges from M2 up to M8. On the other hand, ...

The five major welding processes of capacitor discharge, drawn arc, short cycle, insulation and MARC have been designed to cover a wide range of applications. They are most commonly utilized for: vehicle construction, automotive supply ...

Ideal for quick setups On/Off switchable versions with strong holding forces Available with kinematic top plate for repeatable positioning Non-magnetic mounting surfaces with versatile hole patterns Magnetic bases reduce experimental ...

Side Mounting Top Bracket with Parallel Fixing Holes Type - Mounting Brackets Material Moulding - PA Nylon Bolt and nut in A2 Stainless Steel

:for panels with a thickness from 1 to 8 mm. Material reinforced polyamide.?Characteristics:snap-fastening, quick-locking. State of supply block complete with movable striker plate.

The 16-Slot OpenVPX Development Chassis which is manufactured by Mercury Systems, is designed to provide solutions for multiple performance subsystem configurations to solve challenging problems in the radar, electronic warfare or image ...

These Magnetic Welding Angles (Right) Hold thick or thin gauge steel securely in place for optimum welding. Powerful magnets are mounted in stainless steel housing with an adjustable or fixed 90? angle.

Product Specifications Brand Name : Long T Slot Nuts Meterial : 8.8 Steel Applications : Profile Connector Place of Origin : Turkey Slot: S6 M: M5 B: 6 W: 10 L: 100 D3: 30 D2: 30 D1: 10 H: 5 Product Description It is used on additional ...

The Molex range of printed circuit board assemblies can be customized in order to meet the needs of a specific user defined application. These products are available in a wide range from small interconnect boards to complete modules and ...

Intended use: Sheet metal welding 120?, 90? or 45?. Steelwork In the machining area Advantages: Strong magnetic force Easy to use

Use:to fasten pairs of profiles, Part 8032 or M032R, maximum 10mm apart. Material anodised aluminium bracket, galvanised steel screws. State of supply complete with 2 M8x25 socket head screws, 2 M8 nuts.

The 6-slot OpenVPX Development Chassis from Mercury Systems is designed as the building block of the mercury?s subsystem development infrastructure. Different numbers of backplanes are supported with the slot counts of 6 or less. The ...

Angle Bracket X 8 40x40 Zn, die-cast zinc, white aluminium Angle Bracket Cap X 8 40x40, PA-GF, grey 2 Button-Head Screws ISO 7380-M8x18, St, bright zinc-plated 2 washers 13.9x13.9x2 St, bright zinc-plated 2 T-Slot Nuts 8 St M8, bright zinc-plated

Cross Clamp Type - Clamping Rails & Rods Material Moulding - PA Nylon (Thermoplastic) Bolt & Nut - A2 Stainless Steel

100% matching to the application Reduction of material and inventory cost Large savings potential due to multi-functionality Simplification of assembly Replacement of turned parts

Type PFC2P has a fully concealed-head for tool only access. It is UL approved and available in assorted screw lengths. Type PFC4 installs into stainless steel sheets HRB 88 or less. Also has a fully concealed-head for tool only access. ...

Width: 482 mm
Length: 177 mm

The 1-034Sl Series manufactured by Dirak is a captive and flexible fastener snap-line. This device provides the combination of the usual captive screw which enables a simple installation, with a decreased cost. It is made according to ...

The rigid connection is made using components which differ depending on the requirement made on them in terms of strength, installation and design. Rigid panels can be formed using profiles or special clamping profiles

The SF 095 Series manufactured by Stego is a self-adhesive appliance holder stegofix. This device is used for a wide range of operations. On would be for fixing small shaped appliances, as well as the perforated 35mm DIN rails. Also, ...

Two complete programs for support/columns in the sizes 25mm and 45mm as well as all connection elements for the assembly of any module combinations.

Plastic rivets and fasteners provide numerous methods for fastening or fixing multiple components together. PANOZZO SRL provide a variety of easy application fasteners, from push rivets and screw rivets, to arrow clips and grommet nuts

The Ball Joint fastener for aluminum profiles model D30 is exceptionally easy to use. The Ball Joining Fastener D30 features a non-machined and easy adjoining design principle. It has a free and flexible tubing system paired with a Building ...

Operating temperature: -20 ?C - 80 ?C
Thread diameter: 20.3, 12.3, 16.3 mm

Spit Zentech HD Applications Light Duty Clamps Radiators Inside Lighting Bathroom Fixtures Kitchen Fixtures Mirrors Towel Rails Inside Air Conditioning Units Electrical Accessories