Other dampers

Diameter: 10 mm - 150 mm

Resistant to most oils, acids, alkaline solutions, lubricants as well as solvents. Applicable up to 450?C, in special cases even more Ageing resistance, progressive spring characteristic and high damping (resonant rise between ...

Diameter: 5 mm - 8 mm
Force: 1.5 N - 500 N

Resistant to most oils, acids, alkaline solutions, lubricants as well as solvents. Applicable up to 450?C, in special cases even more Ageing resistance, progressive spring characteristic and high damping (resonant rise between ...

The devices enable slow movements due to thermal dilatation in both directions and oppose only low resistance to such movements. But when the movement speed leads to dynamic forces that are harmful to the installation, the snubbers are ...

This standard brand product stands out due to its reliability, safety and efficiency. All products have been fully tested and are of the highest quality. Numerous sizes and types with different metal connections allow freedom of design ...

This ceiling element features NR black elastomer parts and a lightly, lubricated steel case. Its design keeps it secure and protects against tearing off. Soft absorption of acceleration forces and large impact is enabled. The rate ...

Gates DriveAlign torsional vibration dampers are extremely lightweight and as such they are quite popular with the car manufacturers. The reduced weight of the components results in engine power increase as less power is required to ...

mageba RESTON?PENDULUM seismic isolators are based on the functional principle of a pendulum. They allow a structure to become horizontally displaced during an earthquake, with seismic energy being dissipated by the friction between various ...

The SCHWINGMETALL ? Classic Plus series includes high-quality products offering additional benefits. Numerous sizes and types with different metal connections allow freedom of design with numerous applications. SCHWINGMETALL ? Classic ...

mageba RESTON?PSD Preloaded Spring Dampers are designed to dissipate seismic energy in structures, limiting and damping the movements that arise between parts of a structure during an earthquake. Under normal circumstances they act as ...

Diameter: 28 mm
Maximum length: 56 cm - 64 cm

This device is used for every actuator and brackets with sizes of 14mm, 20mm and 30mm tang. It has a clamp mounting and also with through hole for air hoses and an optional inductive sensor and magnetic sensors that provide best available ...

Nutation dampers are used to dampen the undesirable set of forces correspondent with spinning bodies known collectively as ?nutation.? This nutation, or wobble, when not properly dampened, causes erratic behavior of the spinning body. Glass ...

Lamella dampers made of plastic Model CJK for light applications - Max. static pressure 1000 Pa - Max. temperature 40?C - Max. flow rate 10 m/s CJVK for demanding applications - Max. static pressure 3000 Pa - Max. temperature 60? C - ...

The Shock Absorber is manufactured by HS PENTA. It comes in single and double mechanism.

The SH Shock Absorbers are designed to eliminate every damaging collision force produced by unsteady loads and objects. The moving loads may be halted through a supplied energy with similar and equal levels. Through this manner, the objects ...

Features All the displacement pumps impart to the liquid pumped , as direct consequence of the alternative motion of their pumping elements, pulsations and hydraulic shocks potentially capable to damage the entire pumping system. The ...

Kendrion torsional vibration damper, which operates on the basis of permanent-magnet technology, can significantly reduce drive-train vibrations. The torsional vibration damper ensures double damping of the crankshaft pulley, based ...

Jarret Structures  shock absorbers are built on technology based on the compression of highly viscous elastomeric fluids. The viscosity and compressibility of these fluids allow for the combining of shock absorber and spring functions ...

RunRight Rubber Suspension Units from Lovejoy are made of high-quality elastomers and employed in multiple applications for overcoming suspension, tensioning and vibration absorption problems. For such a solution, all the tensioners, ...

Diameter: 50 mm - 800 mm
Maximum length: 80 mm - 560 mm
Minimum length: 25 mm - 80 mm

Diameter: 100 mm

Diameter: 20 cm - 30 cm
Maximum length: 8.7 cm - 29 cm

Diameter: 0.22 in - 1.75 in

The Lapcon Dampers HDS is a heavy duty closing mechanisms designed to prevent flaps and lids from slamming down or flying open. The HDS are made from quality materials and recommended to be used in pairs for optimum performance. The ...

Diameter: 80 mm - 630 mm

Diameter: 20 cm - 30 cm
Maximum length: 9.7 cm - 29.4 cm

Diameter: 0.22 in - 1.75 in

The Lapcon OVN are soft closing mechanisms designed for over the top flipper doors. The unit uses a patented Lapcon technology that delivers a fluid and silent motion and prevents the door from slamming shut. The OVN are rated to ...

Aluminum Multi-blade damper DSQW-A is used to adjust or close the airflow in ducts. It can be installed in ventilation ducts, air-conditioning units as well as in walls. The damper consists of f four aluminum profiles and aluminum blades. ...

Pulsation dampers for low maintenance vacuum bag with nitrogen accessible from above. Made of carbon steel, AISI 316 stainless steel, duplex and super duplex made of welded construction. They are built with dimensions and maximum pressures ...

Diameter: 0.72 in
Maximum length: 17 in

Diameter: 0.63 in

This item is suitable for assisting with operations such as flipper door opening, with minimal resistance. Note that the doors will not slam shut in any situation. The product is also ideal for applications such as in kitchen and laboratory ...

Damping rings for use when vertical mounting (VI-construction) between bellhousing and tank lid or horizontal (B5-construction) mounting position between motor and bellhousing flange. They consist of two reinforced aluminium rings ...

The AG-4MI.140 model is manufactured by Caribul, and is a rubber anti-vibration damper that is highly appropriate for suspending the looms and other textiles machinery. It has a Kv ranging from 77.6 to 234.8 daN/mm, which is available ...

Maximum length: 10 in
Minimum length: 7.6 in

Diameter: 0.95 in

Pulsation dampeners are accessories used to limit the negative effects of process pressure pulsation or sudden changes in pressure on the internal mechanism of the instruments. Suitable for pumps and compressors, they are manufactured ...

Maximum length: 12 in

Bell shaped antivibration dampers can have oval or square plate.

Diameter: 8 mm - 40 mm

Maximum length: 65 cm
Minimum length: 140 cm

Ideal for vibration controlled fixing of devices such as boilers, pumps, motors, air-conditioning and ventilation systems; also vessels, MPCSupport channels, etc. Suitable for ceiling, wall or floor mounting For sound-decoupled pipeline ...

Force: 250 daN - 10000 daN

In classic absorber design without fluid, or filled with fluid as so-called hydraulic absorbers, they reduce structure-borne vibration caused by resonances occurring in the engine mount system. The elastomer spring is generally where ...

Diameter: 15 mm - 100 mm
Force: 10 daN - 1000 daN

Innovative engine mount technologies are needed to meet the high comfort expectations of future vehicles. ContiTech is working on solutions in the form of active systems for noise and vibration control. Ongoing projects focus on the development ...

PDA-W automatic pulsation dampeners ensure consistent quality of the bath and increased longevity of your system by reducing the effects of pulsation and pressure variation. Suppressing vibration throughout the recirculation ...

Earthquakes cause catastrophic devastation in many countries around the world, destroying buildings, highways, bridges and historical structures. In the collapse of these structures, thousands of people are injured, and many lives are ...

Force: 0.2 daN - 30 daN

MEGI?-Guide Elements play a key role in guiding the wheelset. As system components they can also be used to transmit loads in the traction link and anti roll system as well as in the driveline suspensions. MEGI-chevrons MEGI?-Chevrons are ...

A Marsh Mellow spring is a fabric reinforced rubber cylinder. A main advantage of a Marsh Mellow spring over an air spring in isolation applications is a Marsh Mellow spring does not require air. Marsh Mellow is a trade name of the ...

Based on decades of experience in design and application of VISCODAMPERS? for vibration control of machinery and other industrial equipment, GERB has developed Pipework dampers for the protection of piping systems.

Force: 160 daN - 950 daN

ContiTech supplies and develops shock-absorber components that mask and protect damper systems. Shock-absorber boots made of thermoplastic elastomers can protect shock-absorber systems from external damage and influences. The material ...