Locks, draw latches, latches

Locking bolt execution version S 0.45.0600.0 die-cast zinc, 126 mm square 8 mm, two flat rod, stroke 24 mm execution for round hole

These items provide strong compression against the gaskets on which they are laid, making them vibration resistant. Fixed or adjustable compressions are available and they can have hand, tool or key actuation.

The LLE-SYNCRO Locking Electronic Unit phase is used to lock an external CW laser to the stabilized frequency comb. The unit is based on SYNCRO platform and contains PID loop amplifier for fast modulation output and microcontroller for ...

Brass, chrome plated Without lock 2 keys Weight 0,100 kg Applications Light doors from panel elements up to 8 mm thickness

Just a few minutes is required to install the LOCK 900 as an access control for all types of doors such as door offices, rooms, doorways, etc. Particularly intelligent and innovative, the Lock 900 received the Gold Medal of BATIMAT Innovation ...

The Reciprocating Pumps are specifically designed to provide an exceptional quality functionality and performance. They are well-combined with compressed air including the diaphragm pumps which has the ability to generate the pulsating ...

Draw latches allow to hold two panels, assuring corrosion and vibration resistance. They are available in steel and stainless steel, in plastic or rubber to absorb vibrations. Broad range of actuations and styles.

Slimline Door Latch for swing doors for fitting in the door gap between the Stand Profile and the door. Thanks to its slim design, a door gap of 12 mm is possible. The Door Latch locks onto the head of a Hexagon Socket Head Cap Screw ...

Techn. Data / Items supplied / Items supplied PA 6.6, grey On request also deliverable in black Part N 21.1750/0 Cylinder lock with 2 keys Lock, steel, zinc plated Fastening kit Weight 0,195 kg Applications ...

Unitecnic 200 allows the setup of an access control system for entries and may be programmed directly from the control head, with no programming tool required. Up to 100 badges capacity. Interchangeable control head for inside ...

Camlocks are normally used on circuit breakers. They can also be used for switches and earthing switches on most medium-voltage switchgear. A cam is usually fixed on the driver. Cams are generally used to lock a device or, for example, ...

Lock and grip can be combined in one unit For frameless panel elements With Cylinder or Double-Beard Lock

Camlocks are normally used on circuit breakers. They can also be used for switches and earthing switches on most medium-voltage switchgear. A cam is usually fixed on the driver. Cams are generally used to lock a device or, for example, ...

The K0518 quarter turn lock compression latch comes equipped with a spring-supported tongue component, which comes in various models for different housings. The latch may be assembled before being installed to desired application. The ...

Aluminium GD, powder coated, grey Fastening kit Weight 210949/0 0,432 kg Weight 210959/0 0,441 kg 1000 N Applications For profiles series 30 Locking of doors and lids No processing of profile necessary ...

This bolt lock is used for the mechanical locking of switches, earthing switches. An enclosure can be added, with the switchs status being changed by the bolt when the key is turned. The bolts position (in or out) determines the key ...

The K0527 Compression latch with stepped tongue are primarily used for doors and housings that require a higher pressure force on the seal. Their nut and tongue are in die cast zinc and are chromium-plated. They also feature rubber flat ...

The steel galvanised and blue chromated compression latch features black duroplastic DIN 6336 star grip. The compression latches are primarily used for doors and housings that emphasizes on higher pressure force on the seal. The closing ...

Double security and more comfortable handling when opening and closing cabinets, doors and covers: EMKA Double Red, the new closure with double opening indicator offers all of this. The solution is especially tailored to the numerous ...

The Draw Latch, manufactured by KVT-Fastening GmbH, is designed for engineered access hardware application. This device is mainly used in automobile industry, rail vehicles, indoor/outdoor buildings, sheet-metal case, and furniture or ...

The E3 series, which comes from the Vise Action line of compression latches, is created to align the pawl and tighten it in a single half-turn movement. It operates through a compression action that gives 6.4 mm (.25") pull-up. The pull-up ...

The SDS-C100 DOWNWARD-OPENING FLAP introduced by Lapcon is made up of bright nickel and zinc alloy. It has a 3.5x14/(M5*28) available screws with a door height of xl/2x torque. The device weights 35-50kg- cm(30-43 lbs- inch) per piece ...

Trendy low profile C2 lever latches offers exceptional visible sleek presence installations as well as discretely mounted trigger device provides release built-n handle. Including features and benefits such as broad grip range up to 23 ...

The CH-40323, CH-431, and CH-40341 Series, manufactured by Clamptek Enterprise Co., Ltd, are standard vertical handle toggle clamps equipped with stainless steel structures. They have holding capacities of 1630N, 3180N, and 9000N and ...

The SDS-C30 1N is made of zinc alloy, steel and plastic. It is supplied with screws measuring 3.5 x 14. If installed per piece, it has 40-60kg-cm or 35-60lbs-inch. For the pair, it has 80-140kg-cm or 70-120lbs-inch. The recommended ...

The Lapcon-Dampers are made of a zinc alloy with a bright nickel finish. They are available with drop, butt or piano hinges and screws. The measurement of the torque is door height x l/2x door and the weight per piece is 1.96-6.86Nm ...

The LAPCON DAMPER NSDX-20 Top Opening Flap from SUGATSUNE KOGYO can open from 70? to 105? due to the oval mounting plate holes. These zinc alloy bright nickel finished hinges fully opens the flap, and may be used with butt, piano, or ...

Description: Stainless steel adjustable latch Material: Stainless steel 316 Finish: Polished

The NSDX 35 2S UPWARD-OPENING FLAP introduced by Lapcon is composed of bright nickel and zinc alloy. It provides an opening angle alterable from 80? to 100? with a 3.5x15 available screws. In addition, the product offers two stop types ...

Description: Two-part locking chrome plated barrel bolt Material: Chrome plated brass Finish: Polished

Maximum length: 241 mm - 280 mm
Minimum length: 164 mm - 178 mm
Force: 60 N - 140 N

This lock safety locking device has a slim plastic housing with three cable entry glands M20 x 1.5 or M12 plug connector, locked by both spring and magnetic force. This item is easy to mount with high flexibility thanks to the cable entry ...

RH, LH, vertical and horizontal application. Installation of the cylinder depending on application. Key is always in the correct position. Profile-cylinder with lengths of 40 and 45mm and cam acc. to DIN 18252 can be used. Lock support ...

Maximum length: 159 mm - 293 mm
Minimum length: 113.5 mm - 198 mm
Force: 60 N - 250 N

Rod Latch with compression 4mm. The closing process in two steps: 1. A 90? turn of the Swinghandle brings the cam into the locked position. 2. With another 45? turn the cam is pressed by 4mm against the clamping surface. Constant ...

Dampers for original equipment - automobile and commercial vehicles Solutions for original equipment - automobile and commercial vehicles Beside our standard hydraulic dampers, SUSPA Automotive Applications can offer you various special ...

This part number includes a body and a clip. 3 cam heights available. Straight cam for heights H=18 and H=25 (as shown on the drawing). Cranked cam for height H=13.5. Product in white color : on demand. This quarter turn can be mounted ...

Available with or without key. Keyed alike for version with cylinder

The job of locking bolts is just to prevent a possible change in the locking position due to the presence of lateral forces. A new locking position cannot be set until the bolt is manually disengaged. In the steel version, the locking ...

Maximum length: 1000 mm

Our shock absorbers are designed to generate a linear delay in order to eliminate vibrations, noise and damage to machinery or products. They can brake moving parts quietly and smoothly or reverse their direction of movement. They absorb ...

The lock bodies in the V series are machined from brass, with the core head being made of stainless steel, providing excellent resistance to corrosion. The springs and tumblers in the locks are made of stainless steel, and so are the ...

When your application requires increased security at competitive prices, the Series T cam lock is the best choice. With a construction that is made entirely from brass, as well as a 10 pin mechanism that provides excellent resistant to ...

CAMLOCK 28 series electric cabinet locks offer better safety, exceptional key regulation, as well as a greater construction quality. The main advantages of this item include a 7 pin model of the much acclaimed Octagon system across 500,000 ...

The 2D series of locks is designed to deliver outstanding services at extremely economical prices. The locks are produced by efficiently die-casting the non-stressed constituents, which serves to exponentially lower the cost of production. ...

The C520, manufactured by Camlock, is a 4 pin micro size cam lock that offers optimum functionality but in ultra compact proportions. It has 3 available body lengths with 2 material specifications. The 10.5 mm length is made out of die ...

The GLP-S series by AirLoc Schrepfer AG is an anti-vibration machine foot which is used for wide area load distribution. It can be used for the floor having a low load bearing capacity. This is the ideal tool for specific solutions when ...

These are hydraulic dampers manufactured by Bansbach? easylift. They offer speed in push-in and push-out directions. The speed can be controlled in both the directions. By turning the rod of the piston, the damping intensity can be tuned ...

The SWD series is manufactured by Romer, and is a rope rocker damper that is incorporated with a rope rocker system, which is integrated with an automatic switching valve that ensures fast apply times and very low reset forces . It has ...

Diameter: 8 mm
Maximum length: 35 mm
Force: 11 N

Diameter: 16 mm
Maximum length: 110 mm