Stepper motor controllers

The Precision Ring Drive (PRD) is a part of the precision rotary motion series which is made up of precision-grade bearing and gearhead, along with the Roller Pinion System (RPS) technology of Nexen. This product works with minimized ...

TMCM-1310 is a fully closed loop Stepper control unit with EtherCAT? real time bus control for Stepper motors with incremental a/b/n or SSI absolute Encoders. With its real time EtherCAT? bus interface it perfectly fits all applications, ...

Specifications : Bipolar (BS1) & Unipolar (US1) models Input voltage : 24/36 VDC (+/-10%) Current per phase : from 0.5 to 2A per phase Operating mode : pulse & direction or CW/CCW UL/CSA/CE certified Main Features : ...

Our SMC family is based on modern 32bit technology which enables performances of stepper motor driven systems which havent been possible before. A so called sin 2 acceleration offers very smooth ...learn more acceleration and deceleration ...

Current: 0 A - 7.1 A
Output voltage: 24 V - 75 V

Current: 1.5 A
Output voltage: 9 V - 50 V

Input voltage : Single phase 100 to 120VAC +10,-15%, 50/60Hz Single phase 200 to 240VAC +10,-15%, 50/60Hz Features: -* Low vibration This driver features approximately 30% less vibration compared with our conventional product. -* ...

Current: 1.4 A
Output voltage: 3.3 V - 50 V

Preset Fixed Speed Stepper Control using on-board DIP switches or variable RPM via 0-5 VDC input. 7 Dispense Modes. Automatic current reduction, with stall detection & restart. Compact Size: 3 1/2" x 3 1/4" x 1 1/4 " high Forward, Reverse, ...

The NSC-A2L Series motion controller is a powerful two axis stepper motor control system which combines a microstepping driver with a programmable controller into a compact envelope. Communication to the NSC-A2L can be established over ...

The PCI-8158 brings a maximum frequency pulse rates of up to 6.55 MHz. It is built up with a hardware-controlled emergency input stop. The device has also a software security protection in order to avoid plagiarism. Also, to stop the ...

MAIN FEATURES - Power Voltage DC24V / 48V - High-Speed Field-Bus EtherCAT Interface Based on the widely used 100BASE-TX cabling system and with a baud rate of 100Mbps full-duplex, EtherCAT enables high speed and high reliable communication. - ...

The ST 011 is equipped with a frequency output for controlling a stepper or servo motor power component (RS422). The drives can be controlled or regulated. For the regulated mode, an incremental encoder interface with ABR analysis and ...

DESTACO's CAMCO RSD is a zero-backlash, cam-actuated drive, compatible with industry-standard servo motors for precise control and flexibility. Applications The RSD can be used for rotary or linear applications.

The VST 012 from sigmatek is a VARAN module manufactured for controlling 2-phase stepper motors with voltages up to 70 V, and a continuous current of 10 A. Its compact, IP 20 rated housing that measures 28 x 151 x 123 mm and compliance ...

The Automation 3200-OEM/Nservo-OEM Control Card from AEROTECH, completes motion capabilities like velocity profiling, trajectory modification, and fast input-output. It is configurable in native RS-274, C, .NET, IEC61131, AeroBASIC, or ...

DESCRIPTION: back to top ^ AMCIs ANG1(E) Integrated Stepper Controller/Drive product is a ground breaking approach to PLC-based motion control systems. Traditional motion controllers are difficult to integrate with PLC-based automation ...

The large dial index DTR series has the same internal components as the DT series but includes an innovative integrated reducer that allows the motor to be mounted on the right, left or with 2 motors (as shown). The internal reducer is ...

Input voltage: 5 V - 24 V
Output voltage: 5 V

Feature - Control section with integrated driver - 2-phase, unipolar current driving method - 4 axes (with a liner interpolation function) Axis Control Specification - Number of axes : 4 axes (with a liner interpolation function) - ...

Sankyo's Do Series ring indexer features cast iron housings with a large stationary center bore. The center and outer rings can support stationary dials above or below the indexing dial. Since both inner and outer rings are the same housing, ...

The C-663 Mercury Step Controller from PIEZO provides services with multi-axis control through 16 mercury class controllers that can be handled by a computer at a time. It has a versatile and cost-efficient automation option that can ...

The STP60 Series of Microstepping Driver, manufactured by Dynamic Motion SA, features an output current controlled chopper with 16 microstep/step. This driver has two outputs NPN of 50 mA, and has 6 inputs analog of 12 bit and 0..30 V. Moreover, ...

Current: 5 A
Output voltage: 70 V

The CM10 is a controller module that can be added onto a driver. This will create a special integrated controller on the driver. It may be added to serial ports and only takes a moment to install as it can be placed directly onto the ...

The Tinaxis Plus STP60DB is a stepper motor controller engineered by Dynamic Motion. It features movement types of speed and positioning. The unit is equipped with an amplifier. It is programmable with BASIC. It operates with a voltage ...

The Corvus Eco is manufactured by ITK, and is a multi-axis stepper motor controller for up to 3 axes, which has a resolution of 690,000 pos./revolution. It has a velocity of up to 15 rev/s which has a closed loop interface and error correction. The ...

Right Angle Indexing Drives convert a uniform input motion into an intermittent output motion. The intermittent output motion is transmitted through our induction-hardened, precision-machined globoidal cam. Right Angle Indexers are ideal ...

Interfaces for stepping motor output stages up to 150 kHz: 2 Interfaces for incremental encoders to 1 MHz: 2 Encoder power supply direct from the module via the connectors Monitoring of all external supply voltages ...

The Corvus PCI is a stepper motor controller that is ideal for use in lesser than or equal to 3 axis in a PCI port. The unit has a rated resolution of lesser than or equal to 690,000 pos./revolution, and a rated velocity lesser than or ...

The ECMD241 driver from EC Motion is powered by a 24 to 40 V DC power supply. It is able to produce 0.5 to 1.25 A of phase currents. The unit is fitted with a pulse, direction, gate, and reset input that makes use of a wide range 3.5 ...

High-resolution stepper motor controller in a stage case. High-resolution stepper motor control TANGO Desktop now enables you to control up to 4 axes. It has been especially developed for demanding positioning performance in medical ...

CSD 315 - 3 axes stepper motor control box for bipolare 2phase stepper motors Desktop controller with serial (RS232) interface CNC/DNC control mode, 3-axis linear/circular interpolation, Bipolar power stages, 44V/3,5A, ...

The MD 24 / 28 series is a Microstepping driver with maximum 50 VDC. It uses modules that are micro-step capable and uses a copper technology on its motor currents and identical motors that delivers high speed and torques comparable ...

The IT 116 is a flas step controller has a 32-bit RISC processor with Flash memory for user program. It has an final output stages first is step resolution and motor current adjustable via variable DIP switch and second an automatic current ...

The iMC-S8 is a freely programmable compact controller from Isel that is ideal for near or circular axes with 2-phase step motors. The device combines the essential units including power supply, safety circuit, power electronics, core ...

The SX 25 by Italplant is a Globoidal cam indexing drive which is designed for rotary table applications. This unit comes with a low profile which features its speed, precision and reliability at competitive price compared to other air ...

Input voltage: 50 V - 80 V
Current: 4.2 A - 7.8 A

The flexible axis ports can be configured in software as feedback devices or pulse direction outputs. As outputs they can be used as pulse and direction with stepper or servo drives or they can operate as a simulated encoder output. When ...

Input voltage: 115, 230 V
Current: 4.2 A
Output voltage: 48 V

The MVR 24 position stepper is an automatic bi-directional stepper. It can realize an progressive and sequential operation, thanks to impulsion serial controlling an angular rotation, with the following dispositions: Each electric ...

The DMC-18x2 Econo Series are PCI bus motion controllers designed for the most cost-sensitive applications. The DMC-18x2 controllers accommodate 1- through 4-axis formats and allow control of step or servo motors on any combination of ...

Zaber?s new X-MCB1 stepper motor controller is a single-axis controller that can drive any bipolar stepper motor or actuator up to 2.5 A/phase with high resolution. The controller?s microstepping resolution can be set at any value between ...

Microprocessor for controlling linear stages For stepper motor controlled variable laser beam attenuators Up to 6400 steps per revolution Including query of limit switches for calibration Programmable position, speed, acceleration, ...

The LS10 stepper motor driver series offers an excellent price/performance ratio. They are realized in open design and are easily mountable on the panel thanks to the L-shaped support integrated into the product. Dimensions are contained ...

The PMAC Clipper Controller is a full featured Turbo PMAC designed for extremely cost sensitive applications. This powerful, but compact and cost-effective, multi-axis controller comes standard with Ethernet and RS232 communication ports ...

The Haydon™ DCM4826X Series of Stepper Motor Driver, manufactured by Haydon Kerk Motion Solutions, is designed as a solution to control both rotary stepper motors and stepper motor based linear actuator systems. This device uses ...

The USD modules are bipolar stepper motor drives designed for PCB mounting. They represent the perfect solution to save space and remove the cables as perfectly integrable with the electronics control in mono or multi-axis applications. There ...

The IMC4 by Imes-Icore GmbH is a 4-axis stepper motor driver which functions as a firmly mounted plate that is located in machine rear wall. It features its easy to operate machine cutting of different materials such as wood and plastic. ...

Control Modes Indexer, Point-to-Point, PVT Camming, Gearing Position, Velocity, Torque Command & Communications EtherCAT CoE DS-402 CANopen DS-402 RS-232 ASCII Stepper commands ?10V position/velocity/torque PWM velocity/torque Master ...

Family Overview The programmable stepper motor drive of the DS30 series are the right choice for those applications which require an accurate motor control in speed and position. The built-in indexer is fully programmable by the user ...

Control Modes Indexer, Point-to-Point, PVT Camming, Gearing Position, Velocity, Torque Command & Communications EtherCAT CoE DS-402 CANopen DS-402 RS-232 ASCII Stepper commands ?10V position/velocity/torque PWM velocity/torque Master ...

The SMC 100 is built into a compact aluminum housing with the possibility for screw or top hat rail assembly. Its major advantages are a high phase current of up to 10A as well as a comfortable handling. The interfaces are on the front ...

The PS 10 is a solo-axis control unit which is arranged for two-phase direct current servo motors or step motors. It can be distributed in a networking edition which is derived from CANbus system, to manage several PS 10 control units ...

Voltage: 24 V - 70 V
Current: 9 A

The PS 35 from Owis is a universal position control unit that features a USB and an RS 232 interface characterized by an 8 TTL / analog input including inputs that are applicable also for the encoder. The product consists of a table ...

The SCX11 from Oriental Motor is very functional and is a sophisticated controller incorporating program editing and execution functions. It is capable of storing up to 100 sequence programs and perform various functions like "repeated ...

Voltage: 24 V - 70 V
Current: 9 A