microstepping motor controller / two-phase stepper / compact / programmable

The iMC-S8 step controller is a freely programmable compact controller for linear
or circular axes with 2-phase step motors.
The controller integrates all the necessary components (power supply, safety circuit,
power electronics, core processor, interfaces, operating elements) that are
needed to control individual spindles all the way to entire machines. It has an
intelligent core module that is controlled and programmed via a RS232 interface.
The core module also converts the commands programmed in the user program
into clocking/direction signals for the connected final stages. Depending on the
purpose, the iMC-S8 controller can be used either in CNC or in DNC mode.
In CNC mode, the processor processes the CNC program which was previously
produced with PAL-PC and stored in the controller's Flash memory.
In DNC mode, the iMC-S8 controller is connected permanently with a control
computer (PC, laptop) via a serial interface (RS232). Processing is carried out via
the isel control software Remote.