Stepper motors

The unit is a bipolar PM stepping motor is an ideal method to drive the motor, and attain peak torque and speed. The phases in the motor are always on, but the polarity is reversed as the stepping sequence shows. Bipolar drives usually ...

The integrated stepper motor, controller, encoder and microstep driver has a RS-485/USB 2.0 communication. It makes use of USB 2.0 and RS-485 for communication at 9600 - 115K bps. It boasts of Digital IO communication and an interface ...

Gemini GT Microstepping Drive offers double power choices for equal to 8 Amps of incessant current stride and track (ccw/cw) form Electronic Viscosity%u2122, Active Damping%u2122, and ABS Damping%u2122. Encoder-free stall sense easy ...

Torque: 0.02 Nm - 0.87 Nm
Rotational speed: 0 rpm - 3000 rpm

This Uni-polar PM Stepping Motor is developed by Rotalink. It is generally utilized for driving a stepping motor. The phases inside the motor are can be on or off; the phases are not irreversible. The motor can be used in numerous applications ...

The DMX-J-SA is manufactured by Arcus Technology. It is an electric stepper motor with integrated controller. Highlights of this electric stepper motor is the USB 2.0 communication. It features an autonomous control via BASIC-like programming ...

The Stepper (Series: AM), manufactured by Tolomatic, is capable of a speed of up to 1500 RPM. In addition, it also has a holding torque of up to 6.25 in-lbs (0.706Nm). This stepper, designed with 500 line encoder option, is generally ...

Torque: 0.02 Nm - 50 Nm

o Winding Resistance: 1.4 ~ 51.8 ? o Inductance: 0.8 ~ 30.5 mH o Rotor inertia: 9 / 12 / 14 / 17 g-cm o Motor weight: 110 / 150 / 170 / 195 gw

Stepper Motor Features Motor speeds up to 3,000 RPM High resolution (up to 51,200 steps-rev) Holding torque to 1845 oz-in (13.03 Nm) 2000 line Quadrature encoder option 10 ft. power cables with connector pre-wired ...

Stepper motors offer a compact and lightweight solution to many applications. Their high resolution and high torque-to-size ratio are a key advantage. Moog stepper motors operate at half or full step (200 or 400 per revolution).

The Integrated-drive Electric Stepper Motor Pollux is manufactured by ITK Dr. Kassen. The device has stepper engine, and an integrated controller for excellent manipulation. The maximum resolution is 600,000 pos./revolution, and the step ...

These hybrid stepping motors rotate at fixed angles by digitally controlled electronic pulses. The hybrid stepping motors are also used in the paper-feeding devices of printers, copy machines, facsimiles and similar equipment. Hybrid ...

Torque: 0.5 Nm - 2.3 Nm

Stepper Motor and Driver Package equipped with Battery-Free Absolute Sensor. + Save on an extra sensor and wiring + Save costs of purchase + Save set up time

The electric stepper motor is manufactured by ITK. It functions in various flange sizes of 28 mm, 42 mm, 56 mm, 60 mm, and 85 mm. Furthermore, the motor is supplied with a damper to attain an optimal synchronization.

The G717-90-4 is a NEMA 17 4-wire 1.8 degree stepper motor specifically meant for the G250, G251 and G540. Built in the USA to extremely demanding quality control specifications the G717-90-4 is the perfect balance between linearity and ...

New Innovative Technology JVL closed-loop integrated stepper motors, QuickStep?, provide higher torque, faster acceleration, torque control, stall free operation and quieter movements than traditional step motor systems. QuickStep ...

Diameter: 42 mm - 90 mm

The G723-280-4 is a NEMA 23 4-wire 1.8 degree stepper motor specifically meant for the G250, G251 and G540. Built in the USA to extremely demanding quality control specifications the G723-280-4 is the perfect balance between linearity ...

Features High precision in positioning and indication Small & stable hysteresis, minimized position error between CW & CCW rotation Low noise High temperature capacity High accuracy internal stopper design, internal reset supported Perform ...

Torque: 1.1 Nm - 2.9 Nm
Rotational speed: 1000 rpm

The PK series from Oriental Motor is a 2-phase stepper motor with encoder with 3 output channels. The PK243-01AR2 has a basic step angle of 1.8? with an encoder resolution of 200 P/R and holding torque of 0.2 Nm. It also has an inductance ...

Torque: 1.74 Nm
Power: 8 W
Rotational speed: 6000 rpm

DESCRIPTION These size 23 stepper motors have been selected to match perfectly with the AMCI stepper drives. Their high torque design reduces the length of the stepper motor while providing more torque than most standard size 23 motors. These ...

Torque: 0.6 Nm - 1.2 Nm
Rotational speed: 0.24 rad.sec-1

Torque: 3 Nm - 12 Nm

The PK Series 2-phase stepping motors are high in performance and resolution and come in a wide variety of models such as high-torque, high-efficiency, standard and standard with terminal box as well as SH geared. These two-phase ...

Torque: 0.8 Nm - 1.2 Nm

ESCRIPTION back to top ^ These size 34 stepper motors have been specifically designed to work with AMCI's stepper motor drivers. The result is a selection of powerful stepper motors 450 oz-in to 1100 oz-in. These size 34 stepper motors ...

Torque: 1.6 Nm - 25 Nm
Rotational speed: 3.49 rad.sec-1 - 17.45 rad.sec-1

QuickStep, the Integrated Stepper Motors from JVL. A wealth of possibilities in a series of the world?s most compact stepper motors with the highest microstepping resolution. 2 sizes are available. MIS430 - 10.0Nm MIS432 - 25.0Nm The ...

The PK series is a line of five-phase stepping motors known for their quality and value. Compared to other models on the market, the PK series features low vibration, high resolution and accurate positioning all for a reasonable price. ...

Most microscopes can be retro-fitted with a motorised focus option. The standard motorised focus control provides step sizes as small as 0.002?m and provides excellent resolution for precise focus and repeatable positioning in the Z-axis. ...

Torque: max 0.13 Nm
Rotational speed: max 879.65 rad.sec-1

Torque: 0.01 Nm - 0.03 Nm

Torque: 0.01 Nm - 19 Nm

Torque: 0.22 Nm

Features of nema size 11 stepper motor 1.Nema 11?28m?28mm?hybrid stepper motor, the external part of motor shaft be CNC machined is adopted 303 or 304 stainless steel, the accuracy of it reachs level 1?. 2.Smooth bearing, precision ...

Torque: max 0.41 Nm
Rotational speed: max 502.65 rad.sec-1

Torque: 0.1 Nm - 2.4 Nm
Power: 1 W - 350 W
Rotational speed: 1 rpm - 1000 rpm

Ultra thin stepping motors, SS serie Main features Square size : 42mm (NEMA17) or 50mm Basic step angle : 1.8? Winding : Bipolar, lead wire type Current per phase : 1 A Customization upon request Key points These ultra-thin ...

Main features ? Compact design and light weight with high accuracy, speed and torque ? Suitable for small-sized equipment applications ? Brake 60mm, 85mm of shaft type for compact equipment (AK-B Series) ? Brake force is released(AK-B ...

Torque: 1 Nm - 1.9 Nm
Power: 0 W - 60 W
Rotational speed: 0 rpm - 1000 rpm

Torque: 0.2 Nm - 2.15 Nm

Main features ? Removeable the coupling connecting Ball-screw, TM-screw directly ? Remove resonance(vibration?noise) without coupling ? Compact design and light weight with high accuracy, speed and torque ? Suitable for small-sized equipment ...

Torque: 1 Nm - 9 Nm

RTAs HI-MOD series features bipolar ministep drives with integrated stepping motor. It is based on 3 families with different possibilities of functions: Step&Direction (HI-MOD B) CANopen Incrementa Encoder (HI-MOD E) CANopen Multi-Turn ...

Power: 3.84 W - 9.6 W

Torque: 0 Nm - 0.64 Nm
Power: 0 W - 48 W
Rotational speed: 0 rpm - 1000 rpm

Torque: 0.2 Nm - 9 Nm

Stepper Motors Robust assembly, high speed range, and exceptional performance in even the harshest environments make PRECIstep? drive systems the perfect solution for demanding positioning applications. They are available with a wide ...

The 35D SERIES is a 2 phase hybrid stepping motor manufactured by Shinano. This device functions a broad range of Nema sizes such as 11, 14, 16, 17, 23, and 34. It has step angles of 0.9?, 1.8?, 3.6?, 3.75? and 11.25?. This device is ...

A hybrid stepper motor combines the best features of a standard variable reluctance step motor and a permanent magnet step motor. This hybrid of the two types of stepper motors allows the hybrid step motor to generate a great amount of ...

Torque: 8 Nm - 20 Nm

Torque: 0.01 Nm - 0.01 Nm
Diameter: 20 mm

The 2-phase hybrid electric stepper motor 43D series is manufactured by SHINANO KENSHI. The products overall measurement is 42 mm and the motor length ranges from 31 mm to 61.5 mm. The product has various types of Nema sizes it ranges ...