Pipe and tube clamps

Lining-Materials: ? PTFE (virgin or conductive) ? PP (up to diameter nominal DN 300) Different lining thicknesses on request. Other pressure rates: ? PN 16 ? PN 25 ? PN 40 Material: carbon steel and stainless steel Special features: earthing ...

Nominal diameter: 25 mm - 315 mm

Nominal diameter: 15 mm - 600 mm

PTFE (virgin or conductive) PFA (virgin or conductive) PP Different lining thicknesses and flange designs on request. Other pressure rates: PN 16 PN 25 PN 40 Material: carbon steel and stainless steel special ...

Connects misaligned piping Smooth port provides unrestricted flow Reduces noise and vibration Alleviate piping stress, noise and vibration Are non-corrosive and abrasion-resistant elastomers Elastomers Class ...

FIXE FLANGE TYPE 11B WELDING NECK-RAISED FACE PN 10/16 - STEEL

Nominal diameter: 15 mm - 600 mm

Nominal diameter: 30 mm - 190 mm

FIT-ONE PFA fitting is designed with simplicity and easy of installation. FIT-ONE PFA fitting is high resistivly against pulling makes a reliable fitting, small fluid pressure loss and easy replacement of liguids, and click-gauge as the ...

Nominal diameter: 15 mm - 100 mm

Nominal diameter: 12 mm - 51 mm

Nominal diameter: 30 mm - 75 mm

Nominal diameter: 15 mm - 400 mm

Transitions from plastic fittings to devices, along with detachable connecting for plastic pipes are two of the most common applications you can expect flange joints to be made for. In addition to this, the piping system of type GD comes ...

Developed and engineered by Raccord Plast, this range of PVC molded fittings is specially designed for pressure fluid pumping. All units are constructed with dark gray PVC-U 250, which is either rigid or unplasticized. They come in diameters ...

Nominal diameter: 15 mm - 1000 mm

Flange joints are commonly being used for the detachable connecting of plastic pipes as well as to facilitate transition from plastic fittings to devices like valves or pumps. The GF Piping Systems is able to provide a wide range ...

The base clamps are made of black thermoplastic with DIN 7984 socket head screw and DIN 985 hexagon nut in galvanized steel. The basic size for round tubes is ?18 mm or ?30 mm. In case smaller tubes are to be clamped or converted from ...

Rotary Base allows a REIKU Gripping Clamp or rotary fork to rotate. Material: PA6

The PP molded fittings are made up of PVC-U 250 with the dimensions that range from ?20 mm to ?500 mm which are based on the metric series ISO 161/1. It has an extensive operating temperature which is always under the pressure of up to ...

Nominal diameter: 80 mm - 300 mm

This tubular connection element is made from black thermoplastic, the socket head screw to DIN 7984 and hexagon nut to DIN 985 are made from galvanized steel. The base of the clamp allows for square tubes 30 mm to be clamped. Smaller ...

Nominal diameter: 25 mm - 100 mm

The FGS Brasil offers a Collar Female Thread. This device is a standard compression fitting usually used for fittings and transitions. In addition, this device is made up of PP or polypropylene. The Collar female Thread has a diameter ...

HUWA stainless steel drilling saddle style HUWA-RVZ are used for making connections to valves, t-joints (branch pipes), shut-off valves, pipe and conduit fittings, etc. for water, gas and petrochemical fluids Application: The HUWA ...

Nominal diameter: 25 mm - 1000 mm

Enerpac industrial, mechanical and hydraulic spreaders, with integrated wedge concept provide smooth and parallel wedge movement that removes flange damage and spreading arm failure. They are intended for use in maintenance, commissioning, ...

Hot tap saddles are available from DN44 to DN600 in the temperature range up to 70degC. They can be used to create an installation point without welding.

Nominal diameter: 80 mm - 300 mm

This Hydraulic Flange Spreader is made by Enerpac and comes from the FS series. This device is lightweight and single acting with jaws on the flanges spreaders adjustable from 70 to 216 mm. These flange spreaders have a variety of uses, ...

For use in automobile propeller shafts. To protect and centre the universal joint at the flange. Highly ductile punched parts made of steel sheet, pressed in and tacked with the heat-treated steel center wheel. Subsequent soldering and tempering

Nominal diameter: 80 mm - 300 mm

Nominal diameter: 350 mm - 1600 mm

Materials - PTFE ASTM D-4894 - St 37.2 - DIN 17100 Available on request - Vacuum resistance - Antistatic PTFE - Stainless steel body - Higher diameters on request

For longitudinal-locking connection of cast iron (SML) pipes according to DIN 19522/EN 877 For pipe connections with high requirements, e. g. for use in backpressure and impact zones or for deflections and diameter steps in downcomers Advantages Assembly ...

Versions: electro galvanized. Alternative: stainless steel (1.4301). Same profile of pull-rings for piping with a thickness of 1 mm and 2 mm. The wall thickness is equalized by thicker U-shaped seals for 1 mm pipes and thinner ones ...

?Exclusion of the resin packing seal for high purity gas systems. By utilizing a nickel gasket, an air tight seal is achieved. In addition, it is not only corrosion resistant, but resistant to corrosive gas as well. ??It is most suitable ...

Safety Spray Shields are designed to prevent a catastrophe by temporarily containing hazardous leaks and sprays. Leaks can occur on piping systems conveying chemicals, high temperature fluids, and steam, which can harm workers, nearby ...

material specifications Flange: R-St 37-2 according to DIN 17100 (1.0112) Coating: PTFE according to ASTM D 1457-78 Type IV and V Technical delivery conditions: according to DIN 2874

Tube connections ? Unions DIN 11851/ISO/inch ? Reducing pieces ? Small flanges PN 6/PN 10 ? Flanges ? Aseptic unions K-system/DIN 11864-1 ? Aseptic clamp connections DIN 11864-3 ? Aseptic small flanges K-system/DIN 11864-2 ? Aseptic ...

material specifications Flange: R-St 37-2 according to DIN 17100 (1.0112) Coating: PTFE according to ASTM D 1457-78 Type IV and V Technical delivery conditions: according to DIN 2874

Lead Free* Class 125/150 Companion Flange C ? Wrot 672 The NIBCO? 2-piece solder pressure Class 150 companion flange is used in residential and commercial plumbing applications. The flange features a solder copper adapter and a steel ...

Nominal diameter: 60 mm - 630 mm

Nominal diameter: 15 mm - 400 mm

Join Red Rugged frame, built for job site use Smooth roller clamping action for positive gripping Stainless steel contacts & alignment screws Operating handle repositions for close work Fine adjustment screws for quick fit-up Light weight ...

The CF flanges come in both threaded bolt holes as well as blind flanges. The technical data are subject to change. The CF flanges DN16/40/63/100/160/200/250 can be delivered according to ISO/TS 3669-2. They are matched with ConFlat? ...

Swivel clamp connector bases GN 485 can be combined with swivel clamp mountings GN 482, T-swivel clamp mountings GN 483 and attachment clamp mountings GN 484 with the same k dimensions into swivel clamp mounting joints. Clamping kits ...

Nominal diameter: 50 mm - 250 mm

Nominal diameter: 10 mm - 42 mm

Nominal diameter: 20 mm - 220 mm

Morsello Inox are manufactured of standard UNI 2276 PN.6 and UNI 2277 PN and are available in 10 sizes ranging from DN 15 to DN 150 (thin type). They are also produced of standard flanges as per the drawings submitted by the customers. ...

Nominal diameter: 65 mm - 225 mm

Nominal diameter: 50 mm - 250 mm

The Aluminum Flange for temperature sensor of Temperature Technology Ltd. features the capacity to stock an aluminum on its standard range and and also features an ideal supporter for temperature sensors called plated brass flanges.

We bring forth a comprehensive range of high standard nickel and copper alloy flanges, that are catering to the demands of different industries. These flanges have gained high appreciation for their dimensionally accurate and corrosion ...

Design: The magnetic ZPS flange with square pole technology in monoblock construction with metallic surface and four poles for clamping on the machine table. On the upper side, the AMF clamping module is inserted into the flange and ...

Nominal diameter: 50 mm - 200 mm

Temperature Technology Limited manufactures a wide variety of powder-coated flanges made of mild steel, which are ideal for use in supporting temperature sensors. Each model has a diameter of 101 mm with a height of 24.5 mm. Its baseplate ...