Sleeves

For use in automobiles with hybrid drives. To cover and protect electrical plug connections. Punched part made of highly ductile rustproof steel strip

Bushing Type :Plate Nominal Inside Diameter :5.0 mm Outside Diameter :6.2 mm Overall Length :3.6 mm Actual Inside Diameter :5.0 mm Shoulder Outside Diameter :8.0 mm Material :Nylon

These adaptor sleeves from THB fix conical self-aligning bearings like ball bearing and roller bearings without any support and just a simple structure over a shaft. They consist of tapered adapter bush, locknut and a washer. The set ...

The Press Fit Slotted Locator Bushing are specifically designed to be used in aligning two holes with the use of L-pins without binding. This reliable, price-competitive product by Jergens features a roll pin, a bore bushing hole for ...

Applications municipal vehicles: sweepers, small street sweeping machines, large street sweeping machines municipal vehicles: lawn mowers, mowing machines, slope mowers, leaf blowers/ leaf collectors Properties highly ...

Straight shrinkable casings come in standard lengths 500, 600, 700 and 800 mm. Other lengths are custom made according to requirement. Additional wall thickness Straight shrinkable casings can be supplied with additional wall thickness ...

O-Z/Gedney are specification grade-insulated bushings, which help protect insulated conductors from factors such as abrasion or mechanical vibration, especially during pulling. In addition to this, a voltage gradient is provided between ...

Properties Wall of EC version electrically conductive <10? ?: electrically conductive Premium Ester-Polyurethane (Pre-PUR?) highly abrasion-proof (abrasion resistance about 2.5 to 5 times better than most rubber materials and ...

Reducing shrinkable casings come depending on the dimension in lengths 700, 900 and 1200 mm. Other lengths are custom made according to requirement. All shrinkable casings can be supplied with adhesive, sleeves, insulation and plug ...

The Timken offers precision stainless steel wear sleeves designed to be pressed onto a shaft to provide an enhancement of the sealing surface. The Redi-Sleeves are quick, and a cost-effective solution for grooved and worn shafts. The ...

The 2" coupling size probably covers the most diverse selection of applications in the Todo-Matic family. Available in a range of material and connection configurations, Todo-Matic 2" is designed for rapid and safe transfers. Offshore ...

Accessories include flanges, fastening hardware, earthing cables, hose connections and hoses or compensators as well as other system component accessories. Functional, easy to use, and a perfect fit from our modular system.

The Heyco? Snap Bushing is well suited for use in various insulation applications. It can be mounted in holes that comes with a diameter range of 5,5 mm to 22,2 mm. Conversion of raw-edged holes into smooth and neat insulated holes is ...

Connection Tubes Tube and fittings in general. Temperatures Minimum Temperature: -110 ?C Maximum temperature: +300 ?C These temperatures apply to the equipment without o-ring. For accessories with o-ring see temperature values directly ...

The connector is made ??of plastic (PA 6), black. The nut is made of galvanized steel.

Our Steel Ferrule Type Z is frequently used for special applications in the building or fishing industries. Special characteristics: Suitable for concrete strap loops Suitable for fishing nets Manufactured from seamless tubes Dimensions ...

Insulating half shell comes in dimensions from ?20 to ?1000, see measurement table Produced in standard lengths 340, 450 and 500 mm. Other sizes and lengths can be custom produced. State diameter of carrier pipes, jacket pipes and length. All ...

Dimensions d12/16-1/4? ? d110-4? 16 Pressure rates PN16 Connections solvent socket ? male thread Certificates EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission

The socket in black is made out of plastics (PA 6). The screw nut is made out of brass.

This rounded device is comprised entirely of nylon-6 which is also known as PA-6. It is black in color and can easily be snap-fitted into panels. Tools are not required in the simple procedure needed in order to install this device. ...

In conjunction with Union Nuts, Support Sleeves for 37? Flared Tube Fittings of the FI-BH series are used to secure the tapered end of a 37? flared tube to the also tapered cone adaptor Available in the Light and Heavy Series according ...

Ultra thin metal sleeve and tube Seamless and thin metal tube with uniform thickness, precise roundness and straightness Material SUS304, SUS316, SUS305, Ni, Ti, steel, others and special alloys Producible range in mm - Diameter: ?500 ...

Support Sleeves of the FI-VH series are highly recommended and in some cases generally required to support thin-walled steel and stainless steel tubes as well as tubes made of non-ferrous metals (such as copper, brass, aluminium etc.) ...

The 1/4'' connector is a socket gear that is designed with quarter national pipe thread on both ends.

A standard type and a seal type are available. In addition, each of both is divided into light-load and medium-load types.

Schaeffler sleeve connectors are used with devices for hydraulic mounting and dismounting. The connectors can handle pressures up to 800 bar. The connectors are available in various sizes for the pump holder (G1/4) and consumer device ...

AMERICAN offers ductile iron tapping sleeves in sizes 4? ? 4? through 24? ? 24?. AMERICAN tapping sleeves are designed to provide an efficient means of connecting branch piping to existing lines. The Series 2800 is available in sizes ...

APPLICATION: Water pipeline systems and irrigation.

cylindric sleeve cylindric sleeve with collar cylindric sleeve with leakage hole collar sleeve ball sleeve

Operational safety is 1.5 times the stated pressure, Bold type = short thread (see picture above)

Used with the Hydraulic Tester and consists of two hose reducer bushings

The 190 mm wide Flex Seal LC multi-material coupling is manufactured by Norham company. It has a diameter of 6002000 mm. It has an EPDM seal, two clamping rings, and a central shear band made from grade 1.4301 (304) stainless steel. ...

GF-101 to DIN 2986, with parallel BSP thread to DIN EN 10226

Threaded hose nozzles of SAS series are available in nominal diameters DN10 - DN80. By default they are manufactured and offered in stainless steel AISI 316L.

Flex-Seal Plus XL extra-width flexible couplings come in nominal bores from 300600mm. The 300mm width allows for greater tolerance in the cutting of the pipe ends as well as providing for greater movement of the joined pipes due to settlement ...

GF-103Rp to parallel BSP thread to DIN EN 10226 we reserve the right to alter dimensions with 1.4301 - 2i

Electrofusion fittings by Unidelta are used for connecting polyethylene pipes for conveying gas up to a pressure of 10 bar (There may be different regulations relating to use in the UK, please check prior to instillation) or drinking ...

End and transition bushes and wall and ceiling transitions 30? for securing a continuous empty conduit system at transition points. The very small design of the end and transition bushes allows the feeding of empty conduits even between ...

The Flex Seal Plus DC drainage coupling is a flexible EPDM sleeve for joining pipes with slightly different diameters where the resistance to earth loads and shear forces provided by a shear band is not required. It is fitted with Clip-in, ...

These open/close bushes are constructed from nylon (PA 6.6) and are available in the color black. They have series code TFLV. Designed by BMP TAPPI, the open/close bushes are available in numerous models. The diameter ranges from 12.7mm ...

Flex Seal Plus SC flexible couplings are "straight" or symmetrical couplings fitted with a central shear band. The Flex Seal Plus SC comes in nominal diameters of 50600mm (bigger still with the LC and XLC ranges) and are suitable for ...

The TFLF's Snap - Fit Ring is made from nylon (PA 6.6) materials. It comes in black color.

Dodge Taper-Lock? bushings are flangeless for clean, compact application. They are engineered with an 8? taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble. In addition, Dodge ...

The reduction sleeves are intended for adapting numerous shaft diameters to various bore diameters. Clamping flanges with mounting holes are designed for extreme clamping forces and can be used universally. material brass ...

FEATURES: Carbide version of our popular P bushing, for high-production applications. PC bushings are permanently pressed into the jig plate, usually flush with the top surface. They are generally used for single-operation drilling or ...

The STERIVALVE's Silend Flexible Pipe Connection Sleeve is constructed out of EPDM, translucent silicone and FKM materials. It is made in compliance with the FDA (CFR ? 177.2600) certification. Through its ability to tolerate modest modest ...

Chiorino manufactures a wide range of MF elastomer truly endless belts suitable for applications in many industrial sectors (carton folding industry, packaging, post office automation etc.). Benefits : no joint: manufactured with endless ...

FEATURES: An economical bushing designed for thin template jig plates from 3/64" to 3/8" thick. Bushings are held in place by a threaded Retainer Ring (order separately). Left-hand thread is self tightening during drilling to prevent ...

Squaring of modules All centring bushings for the whole Afag program.