Fittings for specific applications

Large connections in d225 have hitherto been produced with spigot reducers which are integrated into the drain with the help of heating coil fusion couplers. Any subsequent production of connecting pipes is only possible in a time-consuming ...

T-shaped Expanded equal-diameter tee Filter-diameter tee Welded equal-diameter tee Welded Flush tee U-shaped fast-assembly tee Cross-Shaped Expanded equal-diameter cross Welded equal-diameter cross Equal-diameter quick-set ...

Liquid-tight Conduit Spring Connectors (DPT Series) # Material: Iron,Brass,Stainless steel # ?x-mark: ?xd? NO.: CE061093 # Protection Rating: IP67 # Furnished with insulating liner

Operating pressure: 0 bar - 248 bar

Diameter: 1 in - 2 in

The PVC molded fittings are constructed with PVC-U 250 material that can be rigid PVC or unplasticized with MRS = 25 Mpa. It is available in dark gray RAL 7011 color. The dimensions of the pipes are according to the metric series ISO ...

Diameter: 9 mm
Operating pressure: max 180.0 bar

Using the reducers it is possible to obtain the diameters of the male or female hole, as required, either larger or smaller.

Parker Legris blocking fittings are extremely strong and efficient devices meant for allowing maximum flow capacity while saving on space. They are highly resistant, hence they are fully capable of working in aggressive environments, ...

Diameter: 6 mm - 38 mm
Operating pressure: 315 bar - 630 bar

Diameter: 6 mm - 16 mm

The Stratoflex Products Division designs and manufactures crash-worthy fuel breakaway valves for aerospace and derivative markets. Proven lifesavers, breakaway valves separate under crash loads on the fluid lines exceed a predetermined ...

Lining-Materials: ? PTFE (virgin or conductive) ? PP Different lining thicknesses and flange designs on request. Flange design: ? loose-loose-loose ? fix-loose-loose ? fix-fix-fix Other pressure rates: ? PN 16 ? PN 25 ? PN 40 Material: ...

Nickel pipe fittings Bango Alloy supply nickel pipe fittings including but not limited to elbow, collar, flange, tee, reducer, stub-end, cap, and so on. Nickel pipe fittings grades Ni 200 Ni 201 Monel 400, Monel K-500 Inconel 600, Inconel ...

Diameter: 19.6 mm - 23.4 mm
Operating pressure: 30000000 Pa - 60000000 Pa

Diameter: 9 mm - 12 mm
Operating pressure: 12 bar

Diameter: 20 mm - 225 mm
Operating pressure: 16 bar

CPF Fittings & Hose are a new line of quick-test pressure fittings for calibration & test applications -- designed with an emphasis on safety. Crystal Pressure Fittings (CPF) perform at up to 10,000 PSI (MAWP), with a 4:1 Safety Factor ...

Lining-Materials: up to diameter nominal DN1 100 (one-piece): PFA (virgin or conductive) ab Nennweite DN1 125 (two-piece): PTFE (virgin or conductive) up to diameter nominal DN1 300 (two-piece): PP Different lining thicknesses ...

Zirconium pipe fittings Bango Alloy supply zirconium pipe fittings including but not limited to zirconium elbow, zirconium collar, zirconium flange, zirconium tee, zirconium reducer, zirconium stub-end, zirconium cap, and so on. Zirconium ...

Operating pressure: 63000000 Pa

Diameter: 20 mm - 200 mm
Operating pressure: 16 bar

Diameter: 20 mm - 200 mm
Operating pressure: 10 bar

Product Code 491904040032 Product Name Reducing Y 40 ? 32 ? 32 Nominal Diameter (Mains) 40 Nominal Diameter (Outlet) 32 Standards ISO 4427, ISO 8085, EN 1555, EN 12201, AS/NZS 4129, AFNOR NF 136 Material PE100 Suitable Pipes SDR 7 to ...

It is ensured that the pipes and blowtorches are securely connected an disconnected properly by the Isoflam welding safety couplings. They also protect the operator from the hazards associated with the use of gas. Gas and blow back is ...

Diameter: 0.5 in - 3 in

Diameter: 9.1 mm - 25 mm
Operating pressure: 160 bar - 630 bar

Diameter: 4 mm - 6 mm
Operating pressure: 0 bar - 10 bar

Macron produce a comprehensive range of hose fittings in aluminium, gunmetal and other alloys to British, American and other international standards. They can be produced to a customers' specifications in a variety of materials and finishes ...

Diameter: 0.5 in - 8 in

The FGS Brasil offers an Electrofusion Fitting. This device is usually used for fittings and transitions. In addition, this device is made up of polyethylene. The Electrofusion Fitting can be used with an operational pressure ranging ...

Diameter: 20 mm - 25 mm

Diameter: 15 mm - 100 mm
Operating pressure: 16 bar

Diameter: 0.13 in - 0.75 in
Operating pressure: 0 bar - 21 bar

material specifications Shaped pieces: St 35 according to DIN 1629 Part 3 (1.0308) Flange: R-St 37-2 according to DIN 17100 (1.0112) Coating: Pure PTFE according to ASTM D 1457-78 Type IV and V Technical delivery conditions: according ...

Duck-foot bend/Guide hook with hex. Bolt and spring washer/Flange connector with hex. Bolt and spring washer

The PP73460 series is a line of compression fittings, manufactured by FGS Brasil. Its subtypes of PP7346020016 to PP7346075063 have differing dimensions that range from 20 mm x 16 mm x 20 mm to 75 mm x 63 mm x 75 mm, and weights ranging ...

Operating pressure: 0 bar - 420 bar

Additel Pressure Fittings, Adapters, and Hoses eliminate the need for wrenches or tape. They come in three variants: the ADT 103-BSP, the ADT 103-M20, and the ADT 103-NPT. The 103-BSP consists of 10 1/4 BSP male connection apparatuses. ...

Diameter: 4 mm
Operating pressure: 0 bar - 16 bar

material specifications Shaped pieces: St 35 according to DIN 1629 Part 3 (1.0308) Flange: R-St 37-2 according to DIN 17100 (1.0112) Coating: Pure PTFE according to ASTM D 1457-78 Type IV and V Technical delivery conditions: according ...

Progressive Extension Elbows feature one-piece redirection of mold cooling lines and adjustable threads for easy alignment in mold.

Diameter: 10 mm - 13 mm
Operating pressure: 10 bar

Extended Type Hose Couplings for Vapor and Liquid Service Short Type Hose Couplings for Vapor and Liquid Service ACME Check Connectors for Lift Trucks Unloading Adapters for Container Evacuation Filler Hose Adapters ACME Plugs POL Plugs Caps ...

OLAB AISI 316 stainless steel fittings series 1000 are designed for use in pneumatic and hydraulic systems, where the tightness and mechanical retention of the inserted pipe are dependent on two separate components: An O-ring with ...

Diameter: 100 mm

These series KP are one-touch fittings which can be used in drive air systems and clean room blow-off systems. Any areas that come into contact with liquid on this device are non-metallic. The fittings are also oil free. Cleaning, ...

Diameter: 15 mm - 80 mm
Operating pressure: 150 psi

Best utilizing our resources & facilities, we are offering stainless steel and duplex steel pipe fittings. Use of qualitative material provides them durability and long shelf life. Our products are remarkable for their dimensionally accurate ...

OLAB specializes in finding solutions for applications in the sectors where the weight, associated with superior mechanical characteristics of each component, is of fundamental importance, in addition to the traditional fittings in the ...

Diameter: 40 mm

Thread fitting for assembly in extension spring coils, see previous pages. This fitting is safer than conventional loops, which is why higher loads are permitted on the spring. The coil can be cut into the required length, and the fitting ...

Diameter: 12 mm - 305 mm

Diameter: 100 mm

If you?re looking for an industry benchmark in cooling component quality for injection molding, look no further than Milacron?s complete line of mold cooling products. From the premium line of Jiffy-Tite components with unmatched performance ...

Pipe fitting is the occupation of installing or repairing piping or tubing systems that convey liquid, gas, and occasionally solid materials. This work involves selecting and preparing pipe or tubing, joining it together by various means, ...

Diameter: 25 mm - 102 mm

Diameter: 10 mm - 34.5 mm