Pipe adapters

These brass adapters are machined precisely, are SAE-approved, and are made out of highly durable CA-360 brass material. They are very resistant to corrosion and can be used in various hydraulic and pneumatic systems. ...

Use:to connect a column and an orthogonal cross-beam. Material adapter: reinforced polyamide with glass fibre; cap: polyethylene; screws: steel. State of supply complete with 1 M8x25 socket head screw and 1 square plate, 1 end cap.

Diameter: 16 mm - 200 mm

Designed to be used with Rule Pumps and thru-hulls. Heavy-duty molded, non-corrosive, high impact plastic.

Diameter: 32 mm - 75 mm

Length: 44.5 mm - 51.5 mm
Diameter: 6 mm - 13 mm

90? elbow adapters are designed for rigid pipe installations of Sump and Utility Pumps. Adapters snap onto discharge port without the need for a hose clamp. High impact ...

Diameter: 32 mm - 75 mm

Length: 6 mm - 10 mm
Diameter: 4 mm - 8 mm

Length: 4 mm - 22 mm
Diameter: 4 mm - 12 mm

... a complete range of adapters in order to connect easily from tube to tube and from tube to pipe. Standard body material: high tensile 316 stainless ...

Diameter: 20 mm

ID Passage : 7,2 - 7,4 mm Pressure : P.N. 16 bar Accuracy : Precise dimensions Hardness : Abrasion-resistant Construction : Stainless steel 316L Use : Corrosive ambience Humid environment

Application: Converts a female tube fitting end to a male tube stem of the same diameter Key Advantages: Leak tight confidence with Rotarex double-ferrule design Gaugability to confirm proper ...

Application: Converts a tube of one diameter to a tube stem of a different diameter Key Advantages: Leak tight confidence with Rotarex double-ferrule design Gaugability to confirm proper tightness ...

Diameter: 20 mm - 110 mm

Loctite 97208 Accessories Syringe - Syringe Airline Adapter, 10ml

... Grooved fittings provide an economical and efficient method of changing direction, adding an outlet, and reducing or capping piping systems.

The new Gates hydraulic adapter range is suitable for use in completing hydraulic circuits, and as with all Gates manufactured products, this range has been designed, engineered, manufactured and tested to ensure that ...

FITTING DESIGNED FOR THE FOOD, BEVERAGE & POTABLE WATER MARKETS HCJ Stem Adaptor - Inch Fitting Stem Adaptor 5/32 inch to 1/2 inch bag qty: 10

material stainless steel 1.4571 for non-skived hydraulic hoses for high pressure applications fully compatible couplings and press ferrules for enhanced safety Application areas - chemical and petrochemical plant and ...

Hydraulic adapter. With max pressure regulator on demand Solenoid coils interchangeable (12V, 24V). Requested to connect the Paoli hydraulic impact wrench to the hydraulic circuit of an operator machine (tractors, earth ...

... ISIFLO Flexi Adapter is developed and produced in Norway. One fittings for all kind of pipes: ISIFLO Flexi Adapter is a flexible repair fitting ensuring a tight and firm end-load resistant ...

... BSP-METRIC adapters for the RQ Series adapters that are designed for parallel type connections, the RA Series for multi-branched connection types and the RJ Series of UNF JIC adapters ...

The new in house parts production enables the manufacturing of superior quality special work pieces and parts, in particular, turned groves, cross holes, millings multiple-edge turning and complicated geometries. The new mechanical design ...

Length: 12 mm - 48 mm
Diameter: 0.25 in

Diameter: 90 mm - 2500 mm

adapters and reduction nipples are used for matching the threads of high pressure hoses and pipes. Schaeffler Type A (with sealing ring) adapters and reduction nipples ...

We are engaged in manufacturing and supplying an extensive range of Pipe Nipples that are available in various sizes, shapes and specifications. These are fabricated using premium quality raw material in compliance with ...

Diameter: 90 mm - 2500 mm

CONNECTION ? B.S.P. female thread RpVs-Rp4 (DIN 2999) ? B.S.P. male thread Au?engewinde, RVs- R4 (DIN 2999) PRESSURE RANGE Up to nominal pressure PN 10 By unions with PTFE-sealing (only by Art. FG42xx, FG43xx, FG50xx, FG51xx and FG53xx) ...

BORFLEX PIPE MUFFLE ADAPTOR IS USED FOR PIPES CONNECTION WITH MUFFLE ( ASBESTOS, DUCTILE FONT ETC?) AND USED FOR GASKET LEAKAGE.

The KEM series, manufactured by Wiska, is a plastic accessory that is made out of polyamide and reinforced glass fiber. Its robust design has an operating temperature range of -40?C to 100?C and is resistant to acetone, benzine, benzene, ...

The 10-32 UNF range of threaded adapters is engineered with two types of threading in order to be suited to specific applications. Due to company patented O-rings, the adapters are leak proof even when ...

The U19xxx49-48 is a stainless steel adapter that is equipped with ?32- ?125 cylinders. These are manufactured based on AISI 304 specifications.

Brass Adapters A wide range of hose connectors; male-to-male adapters; bushings; plugs; cross, T-, L-, and Y-pieces; and ball valves for maximum flexibility in a variety of applications.

Stainless Steel Adapters A large range of hose connectors and male-to-male adapters in stainless steel.

Length: 39 mm
Diameter: 11 mm

Diameter: 10 mm

Length: 65 mm
Diameter: 27 mm

Adapter hexagonal made of brass nickel-plated ? PG male thread and metric female thread ? metric male thread and PG female thread Material: brass, nickel plated Temperature range: up to +200?C

Diameter: 1, 0.75 in

Adapter hexagonal made of brass nickel-plated ? PG male thread and metric female thread ? metric male thread and PG female thread Material: brass, nickel plated Temperature range: up to +200?C

The HAM-LET? Pipeline range of connectors are specially made for typical applications in chemical and petrochemical processing plants including oil, gas and power generation industries. The valves measure 1/16 to 2 size, ...

Length: 185 mm
Diameter: 114.3 mm

All pipe fittings threads are made to Dryseal standards. Working Pressure: From -65?F to +250?F at 1000 PSI

Length: 57 mm
Diameter: 26.9 mm

Bayonet Adaptors (Stainless Steel) Bayonet adaptors in stainless steel, available in various lengths and thread sizes

Lining-Materials (see chart): PTFE (virgin or conductive) PFA (virgin and conductive) PP Different lining thicknesses and flange designs on request. Flange design: fix-fix fix-loose loose-loose Other pressure ...

Bayonet Adaptors (BNP Brass) Bayonet adaptors in BNP Brass, available in various lengths and thread sizes

The ASEPTconnect Inline unit allows to install measuring instruments into pipes taking all requirements related to successful SIP and CIP procedures into account. The instrument connection is designed as Aseptic clamp-connection ...

Brass Adapters Precision-machined, SAE-approved Eaton brass adapters are manufactured out of durable CA-360 brass. This provides outstanding corrosion resistance for a variety of applications from air ...

Diameter: 6.35 mm - 35 mm

Length: 35 mm - 45 mm
Diameter: 30 mm - 75 mm

... The resistance thermometer can be quickly and easily fitted to all existing pipework. There are no changes necessary to the piping and no welding required. The resistance thermometer can be supplied with a built-in transmitter.