Pipe and tube clamps

Socket Weld Flange (SWRF) is suitable for connecting with the end of pipe for ensuring flawless flow of different sorts of fluids in various industries. This flange range is designed by making use of superior quality materials such as ...

We only produce compressed air piping system network, and this product is one of the components. 1 pieces of AIRPIPE flang gasket and 4 pieces of flange bolts (70mm)are attached for DN25,DN40,DN50,DN63.1 piec of AIRPIPE flang gasket ...

highly abrasion-proof (abrasion resistance about 2.5 to 5 times better than most rubber materials and about 3 to 4 times better than most soft PVC?s) smooth interior high tensile strength and tear resistant microbe and hydrolysis resistant good ...

Nominal diameter: 50 mm - 300 mm

Flange for mounting on frontal-board, for instruments with dimension 2-3-6 DIN module.

Nominal diameter: 0 mm - 350 mm

The socle elevator is made out of galvanised steel.

This flange is used for medium pressures and suction hoses. The rubber flange means that the hose can remain relatively short, starting from a maximum angle of curvature. And because the wear layer rubber extends partly into the top edge ...

Nominal diameter: 10 mm - 450 mm

Induction-hardened and lead-free ground seal bearing surface Internal splines

The swivel flange is used with medium service pressures at points where the bolt holes in the mounting flanges are not precisely aligned. The swivel flange simplifies fitting between 2 fixed points

ELAFLEX supplies flanged hose coupling according to EN 14420-4 in materials stell zinc plated, stainless steel (also coated), aluminium, polypropylene or brass. Flanges according to EN 1092-1 or ASA (ANSI B 16.5). Versions: hose tail ...

Nominal diameter: 25 mm - 100 mm

PRODUCT: Stainless Steel fittings comply with ASME BPE standards. Gaskets are made from compounds which are FDA approved and USP 87, 88 Pharmaceutical Class VI certified. SIZES: Stainless Steel fittings are available in sizes ? - 6 ...

Hose couplings as flanges are used in the chemical industry and on tank trucks etc. Type FGN Flanges acc. DIN 1092-1 with male thread, short or long design. Of steel, stainless steel, brass or aluminium. Type TFA Tank truck welding ...

Nominal diameter: 10 mm - 150 mm

An other approach to the clamping function in a compact size CNOMO Standard Left or right rotation Key points Wide range available: Right or Left rotation model 25 mm or 50 mm course tension choice: models with ?50 or ?63 cylinder Integrated ...

The pipe connectors from AWH come with WAZ 3.1 DIN EN 10204, or with 3.1 AD2000-W2 as another option. The available materials include AISI 304/304L, and AISI 316L. Its surface material is either fine turned, matte blasted, or electro ...

Luxel manufactures three standard frame styles, including mounting in a VAT valve, that are available in several sizes. We will supply custom filters and windows mounted on your frames. Contact us early in the design cycle to ensure that ...

1903-61-08 Steel 1/2 1.500 0.75 2.12 0.69 0.34 0.34 5/16-18 1.22 1.81 0.96 0.75 0.50 0.245 1903-61-12 Steel 3/4 1.875 0.94 2.56 0.88 0.44 0.41 3/8-16 1.53 2.06 1.27 0.88 0.56 0.245 1903-61-16 Steel 1 2.062 1.03 2.75 1.03 0.52 0.41 3/8-16 1.78 2.31 1.52 0.94 0.62 0.295 1903-61-20 Steel 1 ...

Complete product line available from stock, e.g. German "milk pipeline fittings" according to DIN 11851 Nocado small flange with metallic stop and hygienic gasket system SMS ?Swedish dairy fitting? IDF ...

Shorter and narrower design to the BG515 pipe shoe. Style of Shoe base may vary to picture

Stauff's Straight Gear Pump Flanges feature operating pressure levels ranging from 180 bar to 250 bar. They have been made out of S355J0 (or equal) materials, with surfaces made CrVI-free. They also sport ? LK levels ranging from 30 millimeters ...

The Flange Series, manufactured by Strong Hand Tools?, is an alignment flange. Wherein, it eliminates the usage of dog & wedge and cut-off C-clap, due to its messy operation. Furthermore, this series is designed to fit in a different ...

The DB, which is manufactured by Stauff, are SAE split flange halves that is made of 1.4404-grade stainless steel, and as well as S355J0-grade stainless steel or equivalent. Its surface is CrVI-free, and the fluid connector is available ...

MDC's Large-Flange? ISO LF components are an economical system of reusable and interfacing stainless steel vacuum fittings for tube sizes ranging from 2-1/2" through 20" diameters. Large-Flange? ISO LF flanges pick up where the Kwik-Flange? ...

The BM, which is manufactured by Stauff, is an SAE flange clamp that is made of S355J0-grade steel or equivalent to it, and its surface is CrVI-free. The unit is available in two models: the standard pressure series has a maximum pressure ...

RF signals are routed from the transmitter to the antenna through coaxial cables with air or foam dielectric, coaxial rigid lines or through waveguides, mostly with a square, round or elliptical cross-section. Depending on the power ...

are compact combination components made from FRIALEN T-piece, reducer and flange. They are used for the connection of valves made from different types of metal, mainly for the connection of hydrants.

The FLS 85 NU model manufactured by Holmatro, is a flange spreader that comes in with a modular high flow female coupler. This device offers a spring return mechanism with an adaptable entry between the side plate. In addition, it has ...

The Edge clamp 04050 Series is manufactured by Norelem. The product has compact and durable design because it is made of tempered steel 1.1191. The external surface has black oxide finish and the product may also come with a concave washers ...

The OMT flanges are designed to provide detachable rigid connection for pipes and other mechanical items. These forged type units are offered in a wide range including steel SAE flanges, with NPT and GAS threads, as weld-in and weld-on ...

Nominal diameter: 15 mm - 89 mm

Designed for high performance and reliabilty Designed for high performance and reliabilty, our Subsea Pulling System provides the following benefits: - Compact Design. - Long Piston Stroke. - Self Activating collets. - Auto-Grab Anchor ...

Nominal diameter: 10 mm - 100 mm

Nominal diameter: 10 mm - 100 mm

PN10, similar to DIN 2642 / EN?DIN?1092-1, Type 02, aluminium-backing flange

Nominal diameter: 6 mm - 100 mm

Nominal diameter: 10 mm - 150 mm

The MFS range of mechanical flange spreaders comprises of 6 models, each offering a safe and economical way to open flanges without the risk of sparks. The threaded spindle can be operated using a standard spanner, allowing the user to ...

Nominal diameter: 50 mm

We manufacture and supply flanges in all dimensions and formats for ventilation and extraction systems, machinery and container construction and for shipbuilding, as well as many other areas of use specific to each customer. By developing ...

We manufacture and supply flanges in all dimensions and formats for ventilation and extraction systems, machinery and container construction and for shipbuilding, as well as many other areas of use specific to each customer. By developing ...

Nominal diameter: 100 mm - 4000 mm

We manufacture and supply flanges in all dimensions and formats for ventilation and extraction systems, machinery and container construction and for shipbuilding, as well as many other areas of use specific to each customer. By developing ...

Nominal diameter: 50 mm