Dispensing valves, metering valves

Operating pressure: 0 psi - 1000 psi
DN: 1.4 mm

Temperature: 60, 93 ?C
DN: 0.12, 0.25 in

Temperature: -22 ?C - 230 ?C
Operating pressure: 50 psi
DN: 0.38, 0.12, 0.5, 0.25 in

2200-545 Series 2-Component No-Drip Valve The 2200-545 Series automatic mix/dispense valves ensure precise, efficient and cost-effective operation, making them tough to beat for pourable materials. These valves provide complete control ...

The Series 450 Autovalve is the same as the Series 400 Autovalve, except for its shut-off pistons which ensure good control of dot or shot volume. The dual piston pulls back the material from the end of the element mixing nozzle that ...

The 2K valve is part of the Two-Component Dispensing System by Nordson and can be mounted on the end of a robot arm, being designed with a negative pressure shut-off system for dripping prevention. In addition to this, the base and the ...

D08Y is a Fine Metering Gland Packed Needle Valve of Barstock construction. The valve is designed to provide positive shut off and flow metering. The Gland Packing provides reliable pressure containment over a range of temperatures and ...

This high performance valve was developed for the dispensing of liquids in a viscosity range of up to 2000 mPas.The volume range reaches from 8 nl up to 10 ?l per dispensing cycle. The liquids are transferred without impact of the nozzle ...

Operating pressure: 5000 psi

Operating pressure: 20 bar - 200 bar

Discharge Big Bag device especially indicated for material with low flowbility. The Big Bag is set on a vibrating base, set on anti-vibration posts. Designed for 1200 x 1200 mm Big Bag. Contains removable tool yoke for handling by fork-lift ...

Nordson? CE20 valve delivers precise deposition and control. It is suitable for applications demanding sharp material cut-off and consistent bead and spray patterns. It has been designed to work under high system pressures. Recommended ...

BIG-BAG UNLOADING AND FILLING SYSTEM R.G.S. Impianti offers big bag unloading system to be combined with pneumatic conveyors , to transfer easily the product directly from big bag. Especially used in food, wine and ceramic sector, ...

Fishman spray systems on the mark! Uniform dots and stripes without the overspray of traditional spray systems or the unreliability of ink based markers. Fishman spray valves are precision machined, resulting in performance without ...

The Series 400 Autovalve is a reliable and durable Pneumatic Autovalve that features Teflon? seals that reduces maintenance in the shut-off area. It has an optional stainless steel valve that is suited for acerbic acrylics or epoxies. ...

3-WAY DISPENSING VALVE This 3-way dispensing valve is designed to dispense milk in a beverage machine. The application is state-of-the-art, and the valve was custom designed for fit and function.

The TS9200D Jet Tech is a non-contact dispense valve capable of jetting fluid viscosities to 400,000 Cps. Jet Tech offers a fast jetting action producing hundreds of precise droplets in less than one second. The main feature of the valve ...

DN: 10 mm - 150 mm

The 450RC are NORDSON'S series of Recirculating Valves that can dispense adhesives and sealants. It can be operated either manually, robotic, or stationary operation. It is typically used in heated materials or materials with fillers ...

Rheodyne TitanHP valves are extremely versatile and easy to use high-pressure valves for applications up to 6000 psi (414 bar), such as: high-pressure switching injection column selection nano-scale applications sample clean-up/ enrichment multidimensional ...

Dispensing valves are designed for different operations with low and high viscosity media. The flow rate of material and the size of the outlet orifice is controlled by adjustment of the needle position in relation to its seat. When ...

The metering system is ideal for filling and metering critical bulk solids meeting very high requirements in hygiene, metering accuracy, abrasion and product protection. The metering valve is pneumatically operated. A positioning unit ...

Segment disc valve Type 5020 size DN25 to DN300 (up to DN800 on request) pressure PN25 (from DN250 PN16) Pneumatic control valve for controlling liquide media as well as steam. - Can be used for media contaminated by particles - ...

Nordson? CE20 valve delivers precise deposition and control. It is suitable for applications demanding sharp material cut-off and consistent bead and spray patterns. It has been designed to work under high system pressures. Recommended ...

The 3103 is designed to operate with sour gas (high sulphur content gas) that can cause problems for other gas valves. This extremely accurate assembly successfully combines our state of the art electrohydraulic technology with our proven ...

Operating pressure: 0 Pa - 350 Pa
DN: 0.25 in
Flow rate: 0 l/s - 38 l/s

Available in both a standard shut off or snuffback model, the 400 Series Autovalve is used in combination with our line of Meter/Mix and Dispense systems for mixing plural component reactive materials. This would include adhesives, epoxies, ...

REGULEX SHOT METER The REGULEX? applicator can deposit cords of masticor glue. The REGULEX? system consists of as applicator and control bay (B6 Bay). DESCRIPTION High precision flow regulation Bead regularity and size controlled ...

Operating pressure: 70 psi - 100 psi
DN: 0.12 in - 1 in
Flow rate: 20 us gal/min

The VLW valve is the complementary and natural accessory for the PLV pump. In fact permits to manage the fluid inlet flow and the relative flushing with solvent with a pneumatic command. The valve permits the possibility to mount a standard ...

With automated unit for the ventilation of the pressure chamber - for a differential pressureless feed or discharge of bulk solids and powders in or out of pressure or vacuum systems. Range of Nominal Widths: DN 150 - DN 1000 Chamber ...

* Simultaneous flow of two-components * Low or high viscosity materials * Single off-on lever * One piece billet aluminum body * Simple design - lightweight * Very low maintenance * Purgeless or air/solvent nozzles * Air solenoid trigger option

The quick colour change system is a fast, reliable and cost effective way to allow to change to the next production colour in the fastest way possible and with the lowest material waiste. It runs on compressed air. The system?s tail, ...

Gas tight 500 ?l dosing syringe DS 500/GT Three-way valve for LDU which facilitates the bubble-free filling of the complete dosing system.

The DV-05A is an air-actuated diaphragm poppet valve with an adjustable precision piston stroke. This valve provides dispensing of medium to medium-high viscosity fluids, and is suitable for a variety of applications.

For a perfect dosing result The isolating valves are derived from the pressure loading and relief valves. The result is reduced inventory for a whole series of spare parts, and greater flexibility in service. The isolating device is ...

Morse Asymmetric Drum Cones for 208 litre (55 - gallon) steel or fibre drums facilitate lifting, tilting and dispensing dry contents from your drum. Asymmetric Cones work with many Morse models of drum handlers and the asymmetric ( offset ...

Operating pressure: 5076 psi
DN: 0.25 in

The inclined blade of the VDI Inclined Slide Valve forms an eye-shaped aperture with the asymmetrically tapered inner body. The wider the eye is opened, the more material flows through, the further it is closed the more the material flow ...

Steelco, first and unique in the market, has the solution for the safe disposal of drainage bags. By automatic treatment of contaminated drainage bags, plastic bags residues become disposal as general waste or following ecolabel recycle ...

The FlowMatic? 02 manufactured by PALAMATIC is big bag filling system the is used for automatic packaging with net weighing for big bags. It is featured with a continuous operation with a very high rate and has hydraulic cylinder. This ...

Our regulating valves are used for adjusting or monitoring flow volumes and flow directions. Specially designed for use in a broad range of metering, blending, weighing and filling system applications, they are the ideal solutions for ...

This 2-way solenoid valve is pilot-acting. With a body constructed from stainless steel, and a stainless steel stem and viton diaphragms, its valves are normally closed (NC) and are internally piloted. The solenoid valve is ideal for ...

The valve is designed to dose powder under pressure and vacuum. It is suitable for continuous feeding of powder while maintaining extremely uniform dosing. The brushless electric motor with control encoder assures very accurate dosing.

The valve is designed to dose powder under pressure and vacuum. It is suitable for continuous feeding of powder while maintaining extremely uniform dosing. The brushless electric motor with control encoder assures very accurate dosing.

Operating pressure: 8000 psi

When the need arises to load from big bags, they will be hung on hoists and then directed to the combination station. There, the outlet bag is positioned over the inlet pipe and held in place manually or pneumatically, reducing the pressure ...

Temperature: -30 ?C - 80 ?C
Operating pressure: 0 bar - 400 bar

Temperature: -10 ?C - 100 ?C
Operating pressure: 0 bar - 5 bar

DN: 0.38 in
Flow rate: 7 us gal/min

Operating pressure: 1565 psi - 2500 psi

Operating pressure: 10000 psi
DN: 0.38 in
Flow rate: 5 us gal/min

The in-line manual is a needle valve that allows fine metering of hydraulic oil. This shut-off valve features 3/8" NPTF ports and weighs 1.4 lbs. This manually operated valve can be used to manage multiple single-acting cylinders.

Temperature: -30 ?C - 80 ?C
Operating pressure: 0 bar - 400 bar

Operating pressure: 3000, 2500, 4500 psi
Flow rate: 40 us gal/min

Temperature: 0 ?F - 150 ?F
Operating pressure: 0 psi - 75 psi
DN: 3.17 mm

Operating pressure: 0 psi - 500 psi
Flow rate: 28 l/min

Operating pressure: 100 bar

Temperature: 0 ?C - 121 ?C
Operating pressure: 0 psi - 500 psi
DN: 0.12 in