High-shear mixers, dispersers

Jongia's fast running high shear mixer is especially suitable for the production of dispersions of hard to dissolve powders and solids and making emulsions. Its special rotor-stator type mixing head generates: - high shear forces ...

Jongia's static mixer type SBM (in-line tube mixer) has no moving parts. This type of mixer is composed of a tube with a removable mixing element with specially designed flights. Those flights create multiple splitting, roatation and ...

Dispersion under vacuum using single walled containers, double walled containers and disposable containers from 250 ml to 10 litres. The most important features are: Electric height adjustment of the dispersion impeller even during ...

The PT2500 E performs homogenizations with volumes that range from 0.05 to 2500 ml. This perfect solution for laboratories that are cost conscious has an electronic control system that will monitor and maintains continuously, the speed ...

INDCO's model HSD05 pneumatic bench top disperser with tachometer reliably handles batches up to one gallon. Manually raise or lower the unit using the 30" tall mixer stand and securely lock in place with a support clamp. The 1/2 HP ...

An explosion proof vertical mixer package including thermal oil control unit, extruding press, and with easily interchangeable mixing stirrers and scrapers.

BYK-Gardner USA, the sole representative of VMA-Getzmann Dispermat line in North America, supplies dispersers, media and bead mills, vacuum dispersing, homogenizers/rotor stator, impellers and containers, and nano technology for the laboratory ...

The mixer has been designed to mix mortars and cement pastes to the requirements of the standards. The mixing paddle has a planetary motion and is driven by a motor with a microprocessor based speed and program controller. The mixer can ...

The STEPHAN Combicut TC combines several process steps in one machine. These are cutting, mixing, dispersing, heating, cooling, deaerating and emulsifying. The horizontally placed mixing drum is the basis of the machine. A set of cutting ...

The High Shear In-Line Mixers from Silverson are elf-pumping, aeration-free mixers that have the capacity to reach up to 3600 rpm. Designed to handle interchangeable workheads, this maintenance-friendly machine efficiently dissolves solids ...

The 500 HD Mixer is the new device for homogenising or emulsifying mashed potato, soups, etc., for use in canteen, institutional and hotel kitchens and the food industry. Its innovative characteristic, not found on any other blender, ...

Introduction to emulsion profile mapping Developments in oil exploration, as well as a growing demand to better understand emulsion formation and breakdown, has increased the demand for instrumentation by both scientists and process ...

Flashblend from Silverson is a machine capable of rapidly mixing different kinds of powder, even problemaitc ones such as gums and thickeners. It is made to continuously and homogenously blend at the rate of 15,000 kg/hour. The Flashblend ...

SODIMIX by SODIMATE is the new and patented dust free mixing system which features efficient wetting systems and reliable dust collection. The outlet chute in which the dry materials are fed is connected with a plunging pipe to make ...

The TRS series powder liquid mixer is extremely useful when production quantities require continuous process. Both solids and liquids can be instantaneously mixed and dispersed in a single step yet maintaining a dust free environment. ...

The 1025 Red D Mix one gallon gyro mixer continues to add to the long line of product innovation from Red Devil Equipment. The gyroscopic mixing action of the 1025 Red D Mix ensures a thorough mix for a wide range of materials. In addition, ...

The Aero M dry powder disperser enables bulk dry powder samples to be measured using the Mastersizer 3000E laser diffraction particle size analyzer. Its simple design ensures that it is easy to use and maintain, delivering robust, reproducible ...

The application When reducing the entire volume of the measuring circuit of a wet dispersion unit so less sample material is needed which is especially desirable with precious sample material. Additionally is the utilization of liquids ...

The mixers with heads such as rotor stator system (High Speed Disperser), dissolver; or propeller are manufactured in various types and head sizes according to the properties and the desired final product. They are used for similar mixing ...

Dry dispersion is ideal for dry, free-flowing and non-sticking materials. Especially coarse material can be measured with it very well and easily. With the dry dispersion unit the sample material is transported continuously via a vibratory ...

The mixers with Rotor Stator (High Speed Disperser) may be used with different types of heads depending on the intended purpose of the process, properties and quantity of the product to be manufactured. RS-type mixers are successfully ...

Mixing-dispersing units specifically for platform mounting. Batch from 660 to 85000 liters. Powers from 18 kW up to 200 kW, with variable speed by frequency inverter. Wide range of accessories, as: Vacuum lid Orbital scraper Vapours ...

Machine Design The stirring shaft of the FLUKO DMS is directly coupled to or integrated in the motor shaft. This gives the machine a very compact form. Normally, a seal housing connects the motor to the mixing section. Drive FLUKO ...

The Dust Feeder / Dust Disperser SAG 420 is a device for generating solid aerosols by transforming a powdered solid into the air-floating state and has a very large dosing range. enhanced dosing range: 6g/h...12kg/h under operating conditions ...

The ?-Mix? inline disperser wets the solid components on a large surface of liquid as part of the new dispersion method. This is going to be an emission and dust free operation. The vacuum dispersion, shearing and also the pressure wetting ...

Mixing-Dispersing units for portable vessels from 45 up to 4200 liters Powers from 4 kW up to 110 kW, with variable speed by frequency inverter. Wide range of accessories, as: Vacuum lid Orbital scraper Vapours condenser Vessel holding ...

Continuous fine cutting system Rotor/ Stator system with cutting rings and cutting heads for fine-cutting, emulsifying, dispersing and homogenizing, Capacity up to 4.500 kg/h

Stirrer design The MS dispersing machine is a high shear rotor-stator disperser primarily designed for tank mounting where energy intensive mixing in batch operation is required. The stirrer shaft is mounted directly on the drive shaft ...

Featuring a precision high-speed rotor, which creates a vigorous pumping action as it draws liquid into the stator inlet. Liquid is discharged at high velocity through machined slots in the stator. This results in a powerful combination ...

The Lab 500 for axial probe equipment is available in frequencies up to 20 kHz and for a power up to 500W. The choice of the ultrasonic probe determines its performances. The ultrasonic liquid processor is used immersed in beaker. The ...

Introduction: SK500 series mixers are high performance agitators for extended lifetime, reduced maintenance and operating costs, This kind of mixer is specially designed for the application of sealed vessel mixing. Features: 1.C-Face ...

Milkea IE-VMS vertical multistage emulsifier is intended for creating a stable homogenous margarine emulsion with a highly dispersed oil and water phase in a continuous mode without recirculation. ADVANTAGES OF THE MILKEA IE-VMS VERTICAL ...

Introduction: SK600 series mixers are designed to provide reliable service in the largest, most demanding applications, from pharmaceutical fermentation and large-scale chemical processing to minerals processing and heavy sludge waste ...

Hockmeyer?s Multi-Shaft Mixers have a center mounted low speed Helical or Anchor Sweep blade sweeping the mixing vessel wall and an additional high speed shaft(s). The high speed blade typically provides high shear to disperse or dissolve ...

Introduction: High shear dispersing and emulsifying is often required when efficiently,rapidly and uniformly distribute one or several phases into another continuous phase,while normally these phases are immiscible. Work Principle: The ...

A Disperser is a single shaft mixer used to break apart or dissolve solid particles in a liquid. This is typically accomplished using a "saw tooth" blade rotating at high speed (approximately 5200 feet per minute peripheral speed). The ...

Dry powder dispersion device that works in conjunction with Bluewave or S3500 Laser Diffraction Systems. Turbotrac?s primary function is to deliver a properly dispersed sample to the measuring cell in the Microtrac optical bench allowing ...

Compound fine homogeneous pumps are upgraded products of BORHP1. They are for online sustained homogeneous and dispersion. Its working chamber comprises 3-stage,12 layers of stators and rotators. The materials are dispersed, refined, ...

The Scott Turbon Mixing Head has revolutionized the high-shear equipment market. Our high performance design simultaneously pulls product from the bottom of the tank, while pulling down free floating ingredients from the top. The unique ...

The Scott Dixie Mixers mimic ?traditional? technology and flow characteristics of our Turbon mixer, but with less shear. Ingredients enter the chambers through the side, and flow-out through a the larger diameter cage. This flow characteristic ...

The Clemex Powder Disperser is a dry, free-streaming powder disperser used to uncluster particles with the goal that they may be effectively watched and measured on glass slides for Image Analysis by optical microscopy. Immaculate scattering ...

SOFRAMIX is a dispersion mixer that is designed for applications in all types of industries involving liquid/liquid mixing operation and solid/liquid mixing operation. This type of mixer is developed to meet the customers requirements ...

SOFRAMIX is a dispersion mixer that is designed for applications in all types of industries involving liquid/liquid mixing operation and solid/liquid mixing operation. This mixer is developed to meet the customers requirements and to ...

Model HSM-Top entry Sanitary Duty, 32Ra polished 316ss shaft and mixing head TEFC inverter duty motors, plate or flange mount for open tank mixing **2000-5000gal + please contact us OPTIONS mixer speed controller mixing tank, ...

High Viscosity Mixers Multi Shaft high viscosity mixers are available in Offset Mount (separate mixer drives) and Concentric Mount (both mixer drives mounted in center) arrangements. Typically a Dual Shaft high viscosity Agitator or ...

Circulation device ideal for users who manufacturer materials in small, high value amounts or who disperse materials in expensive fluids. The Microtrac Ultra Small Volume Recirculator (USVR) works in conjunction with the Microtrac S3500 ...

Highest quality mixes Product recirculation Large heat transfer surfaces Minimal construction height Easy to clean - suitable for CIP Reliable scale-up Reduced product residues Machine Type In cooperation ...

The SMX plus static mixer is the reference for homogenization and dispersing tasks in laminar flow. Even challenging mixing applications such as dosing a small amount of low- viscous additive into a high-viscous main stream can be performed ...

Main features MINI-MIX Tank from 3l to 25l

Design characteristics All parts in contact with the product are made of stainless steel. The double-walled design and the customizable tool makes the FM a highly versatile mixer. Features Heater mixer with very good heating performance ...

Dispersers / Mixers Disperser/High Speed Mixer (available only in North America) BYK-Gardner USA, the sole representative of VMA-Getzmann Dispermat line in North America, supplies dispersers, media and bead mills, vacuum dispersing, ...

Design characteristics A further advancement of the double-walled FM design with several chambers makes this mixer unique. Features: Absolutely unique functions Metallic/effect powder coatings Bonding Accurate process temperature ...

The High Viscosity Disperser is a useful mixer when slow speed-high viscosity paste mixing is required. The PBA Model includes an air/oil hydraulic lift to raise and lower the agitator from a mix can. The agitator is either a slow speed ...

Conventional High Speed Dispersers consist of a driven vertical shaft and a high shear disk type blade. The blade rotates at up to 5000 fpm and creates a radial flow pattern within a stationary mix vessel. The blade creates a vortex that ...

Inline Mixer- Emulsifier The BACHLAB is designed for laboratory research and development of emulsions, dispersions or homogenization of high viscosities, allowing a direct scale up to its industrial equivalent, the BACHMIX series Operation ...

Jongia's fast running high shear mixer is especially suitable for the production of dispersions of hard to dissolve powders and solids and making emulsions. Its special rotor-stator type mixing head generates: - high shear forces ...

Jongia's static mixer type SBM (in-line tube mixer) has no moving parts. This type of mixer is composed of a tube with a removable mixing element with specially designed flights. Those flights create multiple splitting, roatation and ...

The SonoStep combines ultrasonication, stirring and pumping of samples in a compact design. It is easy to operate and can be used to deliver sonicated samples to analytic devices, e.g. for particle size measurement. Ultrasonication ...