Mixer impellers

The JT-2 impeller is used for superior blending in transitional flow. High viscosity and non-Newtonian fluids make blending much more challenging. This impeller is used after conventional turbines have ...

The A100 by Lightnin is a Mixer impeller which comes with a smaller diameter and direct drive application. For this specific unit, it comes with a super pitch design. For greater mixing ...

Gas/liquid reactions, bioreactors, gassed suspensions Radial flow direction Primary disperser for large gas quantities Homogeneity in the process medium, even with high gas flows, high mass transfer capability Stable ...

... creates down flow in the center and up flow at the wall, creating a complete turnover of tank?s contents. Operating at high impeller diameter/tank diameter ratios, which improves heat transfer at the wall.

Introduction: These impellers promise excellent uniformity of dispersion in the tank and fluidization of material in solid-liquid mixing and slurry mixing under low-revolution and ...

A830 is most common used impeller.Applied in many occasions,especially for low-viscosity and flow-controlled applications. Universal impeller for blending, suspension, heat transfer and dispersion.

... designs, the picture shown is a custom sawblade with inner pitch blade turbines, call for pricing on that exact design. Impeller Standard Finish Options Standard-Sandblasted/Mill Finish Sanitary- 32RA Finish /Welds ...

The MP153D is a 304 stainless steel 3-blade 1-1/2" diameter x 5/16" bore propeller. This impeller is used for general-purpose mixing.

Specifications Liquid / liquid mixing Suspension maintenance High-throughput pump Operational speed 20 to 300 RPM. Materials Steel Stainless steel grade 304L / 316L HASTELLOY ...

Specifications Solid/liquid product dispersion in semi-viscous phase Average operational speed: 1500 RPM. Materials Steel Stainless steel grade 304L / 316L HASTELLOY C22 / C276 URANUS B6 Other ...

Internal recirculation of the gas from the reactor head back into the liquid Complete conversion of the gas High mass transfer enables high conversion rates Safe inclusion of the complete reactor contents including the ...

The complexity of the problems concerning the mixing technology requires careful consideration of the process requirements in order to identify the suitable agitator to solve these issues. Shaft and impellers ...

Impellers are essential tools in meeting the mixing process requirement. Zucchetti's impellers have been developed and studied to ensure the efficiency. These impellers ...

... Biocompatibility Tested What type of mixing and blending equipment is available in high purity fluoropolymer plastics, for non-metallic mixing systems: LAB MIXERS Disposable poly ...

The PPS-2-163 is a solid polypropylene 1-5/8" diameter fixed dual blade impeller attached to a 5/16" x 13-13/16" shaft.

Impeller Standard Finish Options Standard-Sandblasted/Mill Finish Sanitary- 32RA Finish /Welds Ground Smooth BioPharm-20RA Finish/Welds Ground Smooth High End Pharma-8RA Finish /Welds Ground Smooth The design of ...

- Peripheral speed: 5-30 m/s - Diameter: D-d / 0,1-0,3 - Visocosity material to stir: 1-8000 cP

The A200 has a classic of 45 degrees and it has a blade design. Further, the unit produces a desirable balance of flow and shear.

? Variety of agitator/mixer to suit virtually every chemical reaction need. ? Combine agitator types within a single sytem