Ring couplings

Diameter: 0.25 in

Operating pressure: 10 bar - 16 bar

Diameter: 1.6 mm
Operating pressure: 0 psi - 3000 psi

Diameter: 3 mm - 14 mm
Operating pressure: -0.99 bar - 15 bar

Diameter: 4 mm - 18 mm
Operating pressure: 60 bar

Diameter: 63 mm - 1000 mm

Diameter: 10, 8, 6, 4 mm

Diameter: 80 mm - 1000 mm
Operating pressure: 10 bar - 16 bar

Diameter: 0.06 in
Operating pressure: 3000, 1000 psi

Diameter: 0.25 in

Diameter: 4 mm - 14 mm
Operating pressure: -0.99 bar - 15 bar

Diameter: 250 mm - 1250 mm

Diameter: 6, 4 mm

Diameter: 80 mm - 1000 mm
Operating pressure: 10 bar - 16 bar

In case of fire, it does not release toxic or corrosive gases It does not reduce visibility to emergency exits, and facilitate the evacuation process through less smoke emission. It is assembled with conduits and bends of ...

Diameter: 4 mm - 14 mm
Operating pressure: -0.99 bar - 15 bar

Diameter: 67 mm - 200 mm

DESIGN The line "A" consists of a wide variety of com- ponents such as Nippels, Reduction pieces, Connections Plugs, Hose connections, L -, T - and Cross fittings. PRESSURE RANGE PN 16 MATERIAL brass nickel-plated Th e a Dov e informati ...

Diameter: 12 mm - 108 mm

Diameter: 3 mm - 14 mm
Operating pressure: -0.99 bar - 15 bar

Diameter: 63 mm - 200 mm

These compression fittings are for use with numerous applications. There are brass compression fittings with a parallel thread and brass compression fittings with a tapered thread. Numerous other fittings are also offered by Labfacility ...

Diameter: 10 mm - 400 mm
Operating pressure: 4 bar - 16 bar

When fitted, a bayonet fitting spring loads the sensor to keep it in permanent contact with the measured surface. Bayonet fittings are particularly suitable for mounting sensors in plastic extruders, injection moulding machines, etc?

Diameter: 1 in - 2 in
Operating pressure: 10 bar

POOLKE D.O.T push-in fittings meet SAE J2494 and D.O.T. FMVSS 571.106 air brake performance requirements. The series is designed for all D.O.T. truck and trailer applications. Features 1Brass tube support assures maximum flow and performance ...

Diameter: 0.75 in

Diameter: 0.38 in - 4 in
Operating pressure: 10 bar - 16 bar

Swagelok Biopharm TS series fittings are designed to help handle any fluid system problems users might have. They use a controlled gasket compression system that meets 3-A sanitary standards and ASME-BPE. The fitting uses a boreline ...

Diameter: 10 mm - 110 mm
Operating pressure: 10 bar - 16 bar

Diameter: 16.75, 21.25, 13.25 mm

Diameter: 0.25 in - 2 in
Operating pressure: 10 bar

Push-lok fitting: 1,Working pressure: 15 bar 2,Tempereture range: -40 to 100c 3,Material: steel, brass. stainless steel Push-lok can meet you all the instrumentation needs. 1; Offering easy assembly and organization. The push-lok ...

Diameter: 13.25 mm - 16.75 mm
Operating pressure: 250 bar - 400 bar

Operating pressure: 12 bar

Diameter: 10 mm

Here are KQ2 one-touch, metric and inch size fittings. Its availability is extensive, including a wide selection of sizes, body styles and thread types. These are packaged with a design that provides positive sealing under pressure without ...

Dry Disconnect Couplings are used within wet hose systems to connect and disconnect hose and pipe quickly and without spillage, under pressure. This is recommended for aggressive and environmentally dangerous media. DDC serve for loading ...

D?ker SPEZIAL makes the thrust-resisting end connection of flanged sockets and collars possible. For the installation of double socket collars, only the first side can be installed with the D?KER thrust-resisting joint SMU. For the other ...

The Self-seal fitting series KC is outstanding when used for areas where pressure can't be closed down. It features one touch fittings that has deep-seated self seal structure that can avoid weakening of air when the tube is detached. ...

Safety Breaks are used to avoid high costs by drive-away incidents at petrol stations. ELAFLEX break-away couplings prevent dispensers from being pulled over and fuel spills. Tey are well suited to our ZVA nozzles, as they maintain the ...

Operating pressure: 350 bar

The basis of the D?ker thrust-resisting joint SMU for screwed connections is the locking ring with locking teeth. This locking ring takes up the thrust forces. With the sliding bevel at the screwed ring, a radial force is produced with ...

Diameter: 0.38 in - 8 in
Operating pressure: 15, 16, 9 bar

Operating pressure: 630 bar

Diameter: 4 mm - 14 mm

Operating pressure: 800 bar

Diameter: 4 mm - 18 mm

Operating pressure: 630 bar

Diameter: 6, 8, 12, 10, 4 mm

Operating pressure: 630 bar

COMPACT PUSH-IN FITTINGS COMPACT PUSH-IN FITTINGS.

Operating pressure: 630 bar

Diameter: 4 mm - 6 mm
Operating pressure: 0 bar - 150 bar

PUSH-IN FITTINGS IN BRASS A100 SERIES Push-in fittings are so defined as they allow to connect the tube to the fitting in a ?instantaneous? way without using tools. The tightness of the tube takes place through an elastic clamp which ...

Diameter: 0.25 in - 1 in
Operating pressure: 0 bar - 1550 bar