Push-in fittings

Series MQ Manifolds with Pre-Installed Push-In Fitting Cartridges

Diameter: 3 mm - 14 mm
Operating pressure: -0.99 bar - 15 bar

Diameter: 0.25 in - 1 in

REIKU IP 67 sealed connectors with rubber grommet available with a multitude of pre-bored hole patterns or with BLANK grommets. Create a sealed custom strain relief system combined with REIKU corrugated conduit/tubing.

Diameter: 4 mm - 14 mm
Operating pressure: -0.99 bar - 15 bar

Diameter: 0.25 in - 1.25 in

Push in this tube connector into a hole which corresponds to the PG or metric diameter.

Diameter: 4 mm - 14 mm
Operating pressure: -0.99 bar - 15 bar

Diameter: 0.33 in - 0.87 in

Our Push-To-Connect Fitting is a One Touch fitting availablie in quantities of 10 with all brass material. This fitting locks into place securely when connected. In-Stock sizes are available for immediate delivery and are sold online. ...

Diameter: 3 mm - 14 mm
Operating pressure: -0.99 bar - 15 bar

Diameter: 0.47 in - 0.85 in

Operating pressure: 12 bar

These push type, plated fittings permit lubricant to flow while built-in ball, under spring pressure, prevents dirt from entering.

Operating pressure: 350 bar

Diameter: 15 mm
Operating pressure: 3 bar - 12 bar

Diameter: 15 mm
Operating pressure: 7 bar - 16 bar

Diameter: 4 mm - 6 mm
Operating pressure: 0 bar - 150 bar

Diameter: 4 mm - 12 mm
Operating pressure: 15 bar

Diameter: 4 mm - 12 mm
Operating pressure: 15 bar

Diameter: 4 mm - 12 mm
Operating pressure: 15 bar

Diameter: 4 mm - 12 mm
Operating pressure: 15 bar

Diameter: 25.4 mm - 30 mm
Operating pressure: 150000000 Pa

Diameter: 5 mm
Operating pressure: 10 bar

Operating pressure: -0.95 bar - 25 bar

- Seals FPM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range -20 to +120 ?C - Working pressure range -0.95 to 16 bar

- Seals FPM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range -20 to +120 ?C - Working pressure range -0.95 to 16 bar

POOLKE D.O.T push-in fittings meet SAE J2494 and D.O.T. FMVSS 571.106 air brake performance requirements. The series is designed for all D.O.T. truck and trailer applications. Features 1Brass tube support assures maximum flow and performance ...

Push-lok fitting: 1,Working pressure: 15 bar 2,Tempereture range: -40 to 100c 3,Material: steel, brass. stainless steel Push-lok can meet you all the instrumentation needs. 1; Offering easy assembly and organization. The push-lok ...

Diameter: 0.25 in
Operating pressure: 0 psi - 150 psi

Diameter: 0.25 in
Operating pressure: 0 psi - 150 psi

Diameter: 10, 8, 12, 4, 6 mm

Diameter: 0.13 in - 0.75 in

COMPACT PUSH-IN FITTINGS COMPACT PUSH-IN FITTINGS.

PUSH-IN FITTINGS IN BRASS A100 SERIES Push-in fittings are so defined as they allow to connect the tube to the fitting in a ?instantaneous? way without using tools. The tightness of the tube takes place through an elastic clamp which ...

PUSH-ON FITTINGS Touch fittings are mainly used during ?plastic? tubes assembly for pneumatic installation especially in case of vibrations or extreme climatic conditions (that involve changes on tube features by passing time). The fitting ...