Particle counters

Measured values: particle size, particle, particle size distribution; Technology: laser; Analyzed materials: for liquids; Functions: sizing, light scattering; Domains: laboratory, industrial; This instrument is able to measure ...

The DT450G Dust Monitor from Yokogawa is microprocessor-based device which detects leakage in filter bags and monitors the dust level of exhaust gases below a specified level. To separate particulate dust from exhaust gases, bag filters ...

-Run up to 12 samples simultaneously -Measure emulsion and suspension particle size -Measure particle size at high concentrations -Get fast and direct stability measurements -Obtain particle sedimentation and creaming ...

The quality control of fine powders can be substantially improved with the new CAMSIZER X2: More precise and faster analysis of particle size and particle shape helps to improve the product quality, reduce rejects and save labor costs, ...

The best solution to the growing environmental issues around the world is finally here. The Parker H2Oil is an advanced and high quality portable 2 channel non-dispersive absorption spectrometer, primarily designed to measure level of ...

The goal of chocolate production is to produce a product with a consistent taste and mouthfeel in an economical and efficient way. Control of the cocoa and milk solids particle size and particle size distribution is critical to achieving ...

Particle counting, shape and size analysis (Ex:protein aggregates).. The OCCHIO FLOWCELL FC200S+ is an optical morphogranulometer based on image analysis technology. From sample introduction to analysis reporting this instrument integrates ...

NEW - Fully compliant with ASTM D7917 All machines give tell-tale indicators of problems and any change in the wear pattern is going to result in changes in the particle and wear debris levels. That?s why your oil analysis service includes ...

The Saturn Digisizer II is the first financially accessible particle measuring instrument that utilizes the technique of light scattering analysis. It uses an advanced computerized detection technology to convey incredibly large amounts ...

Stationary 19 rack mounted Environmental Dust Monitor, called EDM 180 This is the ultimate solution for any measurement container to measure simultaneously and in real time PM10, PM2.5, PM1 and the TC (Total counts) with one unit. This ...

To reduce quality control in conventional industrial tasks, we bring you the ZEISS Particle Analyzer. This is a lightweight microscopy system of choice is suitably used for continuing dirt analysis and quality control in several types ...

The Sedigraph III 5120 particle size analyzer integrates the proven Sedigraph analytical procedure with cutting edge instrumentation functions to give unrivaled repeatability, precision, and reproducibility in a size extent from 300 micrometers ...

The Spectro LNF Q200 series features LaserNetFines?, the world?s best particle counter technology. With an intuitive, configurable GUI and no calibration required, the Q200 series is fast, accurate and easy to use. Sample preparation ...

The Condensation Particle Counter (CPC) 5416 is the result of continuous development of GRIMMs world-wide appreciated technology. This universal CPC can be used in a large variety of applications due to its compact design and its integrated ...

To reduce quality control in conventional industrial tasks, we bring you the ZEISS Particle Analyzer. This is a lightweight microscopy system of choice is suitably used for continuing dirt analysis and quality control in several types ...

With more and more sophisticated nuclear medicine applications, positron (?+) counting has become of increasing interest. Positrons are unique in that their lifetime is measured in picoseconds. Once they interact with a nearby electron, ...

Fidas? Fly 100 was developed as a real-time dust monitor for battery operation capable of flying and is characterized by its significantly low total weight of only 1400 g (900 g without battery) . Due to its low weight and the compact ...

HORIBA's new LA-350 Laser Diffraction Particle Size Distribution Analyzer is the ideal combination of performance, price, and packaging. Its small footprint (A3 format) and large size range (0.1-1000 ?m) make this new laser diffraction ...

The PiC 9300 is a convenient particle counter that is suitable for suction and pressure side operation.The device also has a wide variety of features such as laser sensor for precise output and gauge head with automatic flush. It is housed ...

The Fidas ? Frog allows for a fast, reliable and quality-assured determination of fine dust e.g. monitoring within the scope of Health, Safety and Environment (HSE) management at workplaces (exposure assessment) or in the range ...

The LA-960by Horiba Scientific is a portable laser particle size analyzer which features its accuracy and reliability. For this specific model, it still adapts the previous features and combined it with the latest which is the strong ...

HORIBA's new LA-350 Laser Diffraction Particle Size Distribution Analyzer is the ideal combination of performance, price, and packaging. Its small footprint (A3 format) and large size range (0.1-1000 ?m) make this new laser diffraction ...

The ETL-One is the innovative air quality monitoring solution designed and manufactured by Unitec for indicative measurement (as defined by European Directive 2008/50/EC) The ETL One is a multiparametric station equipped with Unitec ...

The LA-960by Horiba Scientific is a portable laser particle size analyzer which features its accuracy and reliability. For this specific model, it still adapts the previous features and combined it with the latest which is the strong ...

Features at a glance Resolves particle sizes in complex mixtures Simple, rapid operation, stable No calibration necessary, exact derivations Suitable for a wide range of sizes and densities Variety of operating modes ...

The PC5000 Particle Counter/Portable Sampler combines simplicity of operation, advanced electronics, and powerful performance to set the standard for particle counting. This highly portable unit has the capability to operate as both a ...

The LA-300 by Horiba Scientific is a Portable laser particle size analyzer which is ideal for all types of application. It comes with a standard package of performance, price and packaging. Also, it boasts its ability to do harmonious ...

The PC6 Particle Counter Sensor, when combined with a HydroACT analyzer, brings many of the same great features of Chemtrac's stand alone models (i.e. PC3400 & PC4400) to the HydroACT family of analyzers. This allows the user to integrate ...

The Dust Detect 1000 Model is a dust detector by BinMaster. It is used for controlling continuously the flow of particulate emissions from small stacks. The unit features easy installation in exhaust duct work and can be used with various ...

Features ? The IDS 2030 is a true charge detector and is independent of particle energy (thermal to keV), particle mass, and incident angle. ? Designed for positive charge detection the detector will also detect negative ions and electrons. ? ...

The BM-30 LGX is designed for general process and environmental monitoring. This particulate monitoring includes a control unit, a sensor and a coaxial cable. It works continuously for emission monitoring, bag house filter leak detection. ...

High End Particle Counter ACS plus 128 Measure range 0,1 - 2 (5) ?m 1cfm laser dioden sensor, 28,3 L/min 16 freely selectable particle size channels Access authorization concept with password protection Built-in measuring data memory ...

The Mastersizer 3000 is a sizing instrument manufactured by Malvern. It is suitable for use in particle-sized laser diffraction. The unit offers fast and accurate distribution for both wet and dry dispersion. It measures from nanometer ...

The 9303 has an impact-resistant, robust, and simultaneously lightweight injection moulded plastic housing for comfortable operation. The internal memory can store up to 1500 particle count records, which can be conveniently viewed on ...

The LEAK ALERT 65-02 is particularly suited for use on fabric filter type dust collectors (baghouses). It provides reliable and robust monitoring of particulate dust levels and leaks from faulty bag media. The sensor, installed after ...

The Particle Size Analyzer Series Mastersizer 3000E is manufactured by Malvern Instruments Ltd. The Mastersizer 3000 is highly regarded as the outstanding laser diffraction particle size analysis unit on the market for its design, performance ...

Main Benefits - Increase the value & safety of your product - Reduce bone claims - Improve monitoring & control - Reduce labor costs Marel?s SensorX sets the standard in bone detection. Advanced sensing technology ...

Overview APDA-370 Air pollution monitor for Suspended Particulate Matter (SPM) ensure the long term stability and self-diagnostic capabilities as well as efficient collection of fluorine resin tape. Features Long term unattended ...

The On-line Particle Size Analyzer Series Insitec Dry is manufactured by Malvern Instruments Ltd. The product is constructed to endure the rigors of the process environment and the particle size analyzers utilizes laser diffraction technology ...

The Insitec Spray is an on-line particle size analyzer manufactured by Malvern. This device is engineered to withstand the process environment. With the use of laser diffraction technology for measuring droplets and dry particles from ...

Insitec Wet particle size analyzers are perfectly engineered to withstand the harsh ambiance of of the process environment. The analyzer operates on laser diffraction technology for measurement of particles ranging from 0.1 to 2500 µm ...

The Partikel-Monitor LPM II from Stauff, is a particle counter for hydraulic fluid. It comes in 2 versions, the LPM II-D is equipped with display and keypad, while the LPM II-O has no display and keypad. The series identifies the degree ...

LCCPM is a compact particle monitor for continuous monitoring of the contamination in hydraulic fluids and lubricants. Design characteristics LCCPM is designed for operating with pressures of up to 420 bar. In that way it can be mounted ...

The PAMAS 4132 is used as a particle counting system for Single & Multi?pass Filter test rigs. The standard system fits in the test rigs of filter manu?fac?turers. In case of a Single Pass Filter Test, the liquid passes the filter ...

The Laser Particle Counter LasPaC II-I (Inline) is a type of fluid analyzing device which is an essential element of any oil management system. The device can prevent costly repairs and downtime due to its capability to detect possible ...

The online particle counter PAMAS OLS40 emerged from the standard particle counter PAMAS S40. The standard shell is made of coated aluminium. For Phos?phat-Ester applic?a?tions, the PAMAS OLS40 is manu?fac?tured with a special stain?less ...

GrayWolf's DirectSense? Monitors are integrated with GrayWolf 6-channel handheld particle counters, and Thermo MIE? pDR particulate concentration meters. These systems present and record particulates directly on to DirectSense? mobile ...

The High Sensitivity Liquid in Situ (HSLIS-M50e) Particle Counter provides continuous, real-time monitoring of contamination levels in de-ionized (DI). The HSLIS Particle Counter makes it easy to always understand the characteristics ...

This is the TSI AeroTrak Handheld Particle Counter Model 9306. This is a very versatile handheld particle contamination monitoring equipment because it offers most of the features and the applications of this product are very flexible. ...

The CEL-712 Microdust Pro is a dust detector that features a portable and durable design. It functions as a data-logging device for actual-time detection of dusts, aerosols, and fumes. This unit is designed with a wide LCD display and ...

The real-time variable particle counter in this product series offers the best in-class features, as well as all the versatility you need, in an exciting new field of real time airborne viable particle detection. In addition to this, ...

Open-area Smoke Imaging Detection (OSID) by Xtralis is an innovative system for reliable, cost-effective smoke detection for large, open spaces requiring standard sensitivity detection. In its simplest configuration, OSID uses one imager, ...

Best in its class for features and versatility the TSI AeroTrak Portable Particle Counter Model 9310 is unbeatable. It provides a 1.0 CFM flow with 0.3 um sensitivity. The particle count data can be viewed on the screen and downloaded ...

Dust Profiler - Dust and Particle Counter Aeroqual Cloud Dust Profiler Aeroqual Connect Benefits Simultaneous measurement of PM10, PM2.5, PM1, AND TSP. Measures and reports data in 1 minute intervals Respond in real-time ...

The development of the HAVER CPA 2-1 HR meets your expectations for efficient measurement of even finest powder in laboratories and guarenteed a measuring range from 10 ?m to 4 mm. Combinated with a dispersion technology for a uniform ...

TSP Dust Sentry - Dust and Particulate Monitor Aeroqual Cloud PM Aeroqual Connect Benefits Cost effective outdoor dust monitor Continuous real-time measurement of total suspended particulate (TSP) Compact and light enough ...