Thermal analyzers: DSC, TGA, TMA, thermal conductivity analyzers

ANATEX is an auto-ranging analyzer with excellent linearity. It uses sensors such as a electrochemical cell and paramagnetic sensors for ppm or percent oxygen contents. These sensors fit a large range of applications and can be used even ...

Thermogravimetric analysis (TG) follows changes in mass of the sample as a function of temperature and/or time. TG gives characteristic information about the composition of the measured sample, in particular the amounts of the various ...

Newly developed simultaneous thermogravimetry and differential thermal analysis (TG/DTA, TGA/DTA) with high performances. ?g level weight changes can be detected and precisely measured with high sensitivity horizontal balance systems. ...

Newly developed simultaneous thermogravimetry and differential thermal analysis (TG/DTA, TGA/DTA) with high performances. ?g level weight changes can be detected and precisely measured with high sensitivity horizontal balance systems. ...

TMA7000 has super high sensitivity. It can measure a wide range of samples, including thin film and small samples, because the total measurement method has no shape restrictions. Furthermore, the unit can be switched to push, penetration ...

The A5000T model is manufactured by Mae, and is a thermal conductivity analyzer that is intended to measure the heat transmission of the ground. It is commonly utilized to install the underground cable ducts, or prior to build the geo-thermic ...

With its exceptional overall performance and user-friendly design, the DMA7100 is ideal for uses from routine and high-level research. A navigation guide in the software and the intuitive sample clamping design allow for simple operation. Easy ...

Gasboard?3100 infrared syngas analyzer Based on the NDIR and Thermal Conductivity Detector and can be used for measurement of the concentration of up to 6 gases such as CO ,CO2 ,CH4 ,CnHm ,H2 and O2 ,also calculated heating value(caloric ...

With its exceptional overall performance and user-friendly design, the DMA7100 is ideal for uses from routine and high-level research. A navigation guide in the software and the intuitive sample clamping design allow for simple operation. Easy ...

The OmniScan MX2 is a portable, modular instrument that is designed with a high acquisition rate and the latest high-powered software characteristics for effective automated and manual inspection performance. It is a second generation ...

The Oxygen Permeation Analyzer 8001 is ideally designed to provide a good quality performance and functionality. It is a modular system which is mainly used for an accurate oxygen analysis of the film barrier packaging. It is considered ...

The combination of a TGA with a GC/MS is becoming increasingly popular. When you heat a sample on the TGA it causes gases to be released. These gases are then transferred to the GC where the components can be collected. The sample can ...

Systech provides the Lyssy L100-5000 manometric gas permeation analyzer. This equipment is used for measuring the permeability of different gases, like air, oxygen, nitrogen, carbon dioxide, hydrogen and helium, through films and foils. ...

The 542 series is manufactured by Systech Illinois, and is a flexible and programmable gas analyzer that operates based on the principles of thermal conductivity. The unit has the capacity to gauge a wide variety of combinations of gases ...

The PerkinElmer TMA 4000 has been especially designed to deliver superior performance in measuring the CTE (coefficient of thermal expansion) in materials. It has a robust and user-friendly design which helps in precise measurement ...

The PerkinElmer TMA 4000 has been especially designed to deliver superior performance in measuring the CTE (coefficient of thermal expansion) in materials. It has a robust and user-friendly design which helps in precise measurement ...

The STA 6000 simultaneous thermal analyzer is a simple, vertical system intended for use in a range of routine and research applications. It features the most advanced technology available and delivers high accuracy and quality results. ...

The STA 6000 simultaneous thermal analyzer is a simple, vertical system intended for use in a range of routine and research applications. It features the most advanced technology available and delivers high accuracy and quality results. ...

The STA 8000 simultaneous thermal analyzer provides dependable reliability, productivity and performance. The STA 8000 has been designed with routine and research applications in mind. It applies an efficient design and advanced innovative ...

The STA 8000 simultaneous thermal analyzer provides dependable reliability, productivity and performance. The STA 8000 has been designed with routine and research applications in mind. It applies an efficient design and advanced innovative ...

Gas Permeability Analyzer is professionally applicable to gas transmission rate measurement of plastic films, package, foils and sheeting materials using differential pressure method and based on ASTM D144, ISO 15105. Applications ...

The revolutionary Emerson 499AOZ Dissolved Ozone Sensor is made out of ozone-resistant polysulfone. It has an easily replaceable membrane which does not require the use of any tools, a variopol connector option, and an automatic compensation ...

The testing instruments of the EPLEXOR? series up to ?500 N enable the dynamic mechanical (or static) characterization of a wide range of different materials including elastomers and polymers, composites, metals, glasses, ceramics, biomaterials ...

LabThink's OR2/411 Organic Gas Permeability Analyzer was engineered based on the integration of differential pressure systems and chromatography analysis technology. This device delivers quantitative and qualitative assay of film and ...

Emerson's XEGP General Purpose Gas Analyzer model is a relatively new one from its X-STREAM? Enhanced Process Gas Analyzers Product Series. The model features its IntrinzX technology system, which provides overall high performing operation, ...

The DSC 404 F3 Pegasus? is a flexible solution for all DSC and DTA applications in the departments of quality control and also product development. This device can be easily customized for various specialized applications. Sensors and ...

The updated thermobalance TG 209 F1 Libra? enables analyses to be accomplished even faster, more precisely, and across an expanded temperature range. As for other thermobalances, no time-consuming baseline identifications need to be accomplished ...

ChemiSorb 2720/2750 has the capability to perform both physical adsorption and chemisorption measurements required for the development, testing and production of catalyst. ChemiSorb2720 is affordable and upgradable, ideal for modest ...

The TG 209 F3 Tarsus? is a thermo-microbalance which is custom-made not only for the quality assurance of polymers, but also for routine applications in the fields of organic, chemistry, pharmaceuticals, cosmetics and food. A thermocouple ...

The ATEX 8866 is manufactured by Adev. It is a thermal conductivity gas analyzer, that is designed for applications like heat treatments, copper melting, and galvanizing in a wide array of demanding industries such as chemical, petrochemical, ...

The FlowSorb III is a device manufactured by Micrometrics company. It measures the surface area using the flowing gas method that involves the continuous flow of an adsorptive and inert gas mixture over the sample at atmospheric pressure. ...

The STA 449 F1 Jupiter? is manufactured by Netzsch, and is a simultaneous thermal analyzer that combines unlimited configuration flexibility and unmatched performance. It has an easy to use top-loading system with precise balance resolution ...

The STA 449 F1 Jupiter? is manufactured by Netzsch, and is a simultaneous thermal analyzer that combines unlimited configuration flexibility and unmatched performance. It has an easy to use top-loading system with precise balance resolution ...

For continuous measurement of hydrogen and noble gases, the thermal conductivity of the sample gas mixture is measured and used to calculate the concentration. Only binary gas mixtures can be measured directly. If more than two components ...

Discovery Laser Flash DLF 1600?s source module is a freestanding unit employing a custom Class 1 35 J Nd:Glass laser pulse source. It provides a collimated, monochromatic energy pulse to specimens heated up to the temperature of 1600?C. ...

In order to increase operating efficiency of turbine generators in power plants, it is necessary to cool them. Hydrogen gas is used to cool the generators in spite of the strict safety requirements arising from that. Compared to air, ...

The TGA 5500 is designed for the researcher that requires the highest level of performance and features in one package. Built to maximize temperature control and minimize drift, the TGA 5500 has less drift than any competitive TGA ? even ...

Benefits: No moving parts design Sample return to process (with HAG probe option) Minimal sample conditioning Low maintenance design Minimal calibration drift Stream switching capability Typical Applications Amine-based tail gas ...

Simultaneous Thermal Analyzers measure both heat flow & weight changes in a material as a function of temperature (or time) under a controlled atmosphere A simultaneous DSC-TGA can be used in a phases of research, quality control, ...

Simultaneous Thermal Analyzers measure both heat flow & weight changes in a material as a function of temperature (or time) under a controlled atmosphere A simultaneous DSC-TGA can be used in a phases of research, quality control, ...

The Symmetrical TGA system facilitates high performance(ambient/1750?C). It facilitates long term oxidation or corrosion studies by its excellent isothermal balance and unparalleled performance. There is no buoyancy effect. ...

The Western Research? Model 931 is an intelligently engineered process analyzer that delivers comprehensive services in analyzing and monitoring single gases. The analyzer incorporates a compact structure, is exceptionally trust-worthy ...

The Q400EM is the industry standard research-grade thermomechanical analyzer (TMA), with unmatched flexibility in operating modes, test probes, fixtures, and available signals. The 0.400EM Enhanced Mode allows for dynamic experiments ...

Compact, portable analyzer for the measurement of 14 combinations of gases based on a thermal conductivity sensor. The ideal analyzer for mobile use and service. Benefits: flexible due to 14 different 2-gas mixtures in one unit ...

The TGA701 model is manufactured by LECO Corporation, and is a thermogravimetric analyzer that is utilized to determine material weight loss as a function of temperature in controlled environment. It is intended for reduction of workloads ...

SDTGA8000 proximate analyzer is applicable in the industry such as electrical power, coal, commerce inspection, environment protection, metallurgy, paper making, petrochemical, earth probe and the research institution or quality inspecting ...

The portable gas analyzer can be used for the calculation of carbon in endothermic and nitrogen methanol based atmospheres with an input of temperature. This instrument meets CQI-9 requirements for daily generator and furnace atmosphere ...

Application ? Determination of moisture, volatile matter and ash, and the calculation of fixed carbon and calorific value in coal, coke and solid biomass fuel; ? Analysis of carbon content in fly ash and clinker; ? Determination of ...

Composite Defect Finder is the turnkey control system, developed in DES labs, for the detection and characterization of defects on composite materials. Designed for the inspection of large and small structures, it allows the operator ...

The TGA 2 (SF) offers seamless workflows which require only very few user actions in order to start a routine analysis. Our TGA instruments use the world?s best micro and ultra-micro balances which deliver results of unsurpassed accuracy ...

With the magnetic suspension balance LINSEIS MSB PT 1, gravimetric measurements in a wide temperature and pressure range and under aggressive media can be done. Such a magnetic suspension balance consist of a balance for recording the ...

With the magnetic suspension balance LINSEIS MSB PT 1, gravimetric measurements in a wide temperature and pressure range and under aggressive media can be done. Such a magnetic suspension balance consist of a balance for recording the ...

The FOX 200 Heat Flow Meter is an accurate, easy-to-use instrument for measuring thermal conductivity according to ASTM C518 and ISO 8301. Operating in standalone or PC-controlled configurations, the FOX Heat Flow Meter provides rapid, ...

The LINSEIS TMA PT1000 Thermomechanical Analyzer is designed with reproducibility, accuracy and high-precision in mind. This system meets all TMA/DTMA requirements and is capable of performing a range of thermomechanical experiments on ...

The Nova 970 Series Syn-Gas Analyzer System has been designed with the flexibility and robustness required in the experimental and developmental environments that characterize syn gas applications. The Nova 970 Series utilizes high-stability ...

The FOX 600 Heat Flow Meter is an accurate, easy-to-use instrument for measuring thermal conductivity according to ASTM C518 and ISO 8301. Capable to operate both in standalone or PC-controlled configurations, FOX 600 Heat Flow Meter ...

The updated Linseis TGA PT1000 is especially designed for thermogravimetric applications. It is a toploading Thermobalance that provides a highly user-friendly design. The tara is made electronically, even at a sample weight of up ...

The Nova 970 Series Syn-Gas Analyzer System has been designed with the flexibility and robustness required in the experimental and developmental environments that characterize syn gas applications. The Nova 970 Series utilizes high-stability ...

5E-MAG6700 Proximate Analyzer (Thermogravimetric Analyzer, TGA) is used to determine the moisture, ash, volatile matter in coal, coke, biomass, limestone and iron ore, food and feedstuffs by thermogravimetric method. It can also determine ...

The FC-TGA-S is a Thermogravimetric analyzer (TGA) designed for industries such as electrical power, coal, commerce inspection, environment protection, metallurgy, papermaking, petrochemical, earth probe and the research institute or ...