Gas sensors

? Designed for hygienic applications to measure dissolved oxygen content (DO2) reliably and accurately ? Uses photodiode technology ? Measurement range from 4ppm to 25ppm (0.05% - 300% saturation) ? Low maintenance required ? ...

Designed to meet with the toughest industrial requirements, the SMART S-MS allow monitoring flammable contents in harsh environments. They offer an 8 digits back-lit display and 5 mode status LEDs for the gas concentration reading. They ...

The CGS500-IR sensor is a NDIR (non dispersive infrared) sensor designed to replace thermocatalytic gas sensors for monitoring hydrocarbon gases in the range 0-100% LEL. The CGS500-IR is available as a sensor only or fitted in an EEx ...

SMART P are available in the following versions, according to the gas to be detected: CO, range 0-300 ppm, industrial grade 3-pin cell NO2, range 0-30 ppm, industrial grade 3-pin cell Petrol vapours with range 0-100%LEL To ...

Connectivity with PVPRO, PWPRO, pCO family; Complies with standards F-GAS and EN378 ? ASHRAE 15 ; The infrared version offers: Accuracy in detecting low-loss (ppm); Calibration that reacts only to the specific gas; Stability to changes ...

This product can respond to molecules defined by carbon double bonds, as well as aromatics and non-destructive items. The product is mandated in several EPA methods, with the extremely long lamp life being one of the major advantages ...

A gas sensor corresponds to the role (the olfaction) of "a nose", if it compares to the five senses of the human being. The resistance value of the oxide semiconductor changes by the interaction between various gases and the surface of ...

Remote methane sensor. Solid state sensing element. Sensor life: 5 years. IP30 case. For Segugio detectors only.

The DO30G sensor for dissolved oxygen is designed for use in water treatment plants such as sewage treatment works, effluent activated sludge process, and potable water treatment. It is also effective in river monitoring, intake protection, ...

Uses Simple electrical circuit High sensitivity to exhaust gas of autovehicle Application Car Exhaust Gas Sensor Detection, Car AQCS(Air Quality Control System), (NOx detection, CO?HC detection)

Remote LPG sensor. Solid state sensing element. Sensor life: 5 years. IP30 case. For Segugio detectors only.

Designed for water treatment plants like sewage treatment works and sludge process that are effluent activatated, the D070g optical dissolved oxygen sensor has a quick time response and good long term strength. Included in its design ...

The HSS VPF-710 Visibility Sensor is suitable for use in any system where a digital output to a computer or logger is required. This sensor has sophisticated levels of self test for remote monitoring and is used particularly on airports, ...

The VoCup air-quality sensor is available with 0-10 VDC output signal with or without VOC light. Save energy on the sensor system with its extremely low energy consumption (only 14 mA @ 24 VDC). It may be combined with the switch series ...

The KNESTEL PAS-NO2 is a photo-acoustic and nearly drift-free sensor for the direct detection of nitrogen dioxide (NO2) in the smallest concentrations. Large measurement ranges with simultaneous extremely low detection limit can be achieved ...

Precalibrated replaceable CO detector sensor with threshold and accumulation mode. Suitable for Segugio and Beagle product.

Oxymax COS61D is a high-performance, digital oxygen sensor that offers fast, accurate and drift-free measurement. It supports your process with low maintenance, high availability and easy handling. The sensor's long-term stable fluorescence ...

The VoCap air quality sensor is available with 0-10 VDC output signal, with or without VOC-light. Save energy on the sensor system with its extremely low energy consumption (only 14 mA @ 24 VDC).If you are unable to install our VOC-flush-mounted ...

Precalibrated replaceable LPG detector sensor. Suitable for Segugio and Beagle plus product.

This is a dissolved oxygen sensor that reviews wastewater spaces and has a digital sensor encased in stainless steel. It costs less to maintain and it lasts longer than most comparable units. It interacts digitally and can be mounted ...

Dissolved Oxygen measurement can be applied in avariety of industries and applications where accurate measurement and control is required to improve and optimize processes. Dissolved Oxygen is a term used for the measurement of the amount ...

Precalibrated replaceable Methane detector sensor. Suitable for Segugio and Beagle plus product.

The OPTISENS ODO 2000 by Krohne has a standardized robust design that has a long lifetime span, the optical dissolved oxygen sensors are broadly used to control and monitor oxygen concentration during the biological treatment of sewage ...

The new residual oil sensor S 120 monitors oil contents of compressed air and gases permanently or for spot checks when used as portable unit in conjunction with S 551. The simple installation and the outstanding performance makes S 120 ...

The Carbo 510 Smart Sensor is a CO2 sensor that is online. The device can provide readings at the rate of every 15 seconds and is therefore one of the fastest sensors available. It conforms to guidelines of EHEDG (European Hygienic Engineering ...

The ADOS TOX 592 gas sensor is suitable for continuous measurement of a concentration of toxic gas in air, over the range of 0-20 ppm to 0-1000 ppm. Field of Application In garages for measuring, control and warning, in conjunction ...

Air quality sensor module AM4100 integrate PM2.5 CO2 VOC RH&T sensor, can detect particle quantity of size from 0.3um , CO2 concentration, VOC concentration, related humidity and temperature. It adopts laser scattering technology for ...

The CO2 sensor module was designed specifically for usage in large volume production as well as OEM applications. The CO2 sensor is used based on Infrared technology (NDIR). Unit does not require maintenance as it is based on the patented ...

Applications Monitoring in Bioreactors Measurement in Food and Beverage Determine metabolic processes Concentration measurements, e.g. in slurries, oils ... Monitoring of processes of oxidation Fermentation monitoring ...

The InPro 6800 polarographic oxygen sensor is recommended for authentic in-line measurement in implementations that require sterile, hygienic surroundings. It features an accuracy of +/-1 % and a low detection limit of +6 ppb, EHEDG certification ...

With the publication of the ATS and ERS recommendations1, measurements of exhaled nitric oxide have become an easy, reliable and quantifiable method to detect airway inflammation. The DENOX 88 module supplies NO free air and controls ...

METTLER TOLEDO?s InPro6850i polarographic oxygen sensor uses the new 3-electrode system and has a separate platinum anode which increases signal stability even in low oxygen levels. Installation and maintenance are much more easily performed ...

The visibility gauge is a device used for measuring visibility. This measuring instrument consists of a transmitter and a receiver and determines the meteorological optical range by measuring the coefficient of transmission or extinction ...

Air quality sensor module AM4000 integrate PM CO2 VOC RH&T sensor, can detect particle quantity of size 0.3um 2.5um 10um, CO2 concentration, VOC concentration, related humidity and temperature. It adopts laser scattering technology for ...

The METTLER TOLEDO InPro 6050 polarographic oxygen sensor are designed and developed to provide reliable and accurate simultaneous measurement of dissolved oxygen and temperature values in the field of water applications. Its robust ...

CH4 Sensor - IP44 Power supply 12-24V d.c. +/- 10% Catalytic sensor for NATURAL gas having a duration of 5 years Detector measurement field 0?20% LIE Analogue output signal 4mA?20mA Protection degree IP44 Max control unit distance 100m Probe ...

Pyreos offers a full range of TO packaged sensors from single to quad channel in the common sized TO39/TO5 packages and also a miniaturised single channel TO46. Our products are reliable and easy to use. They all have a standard voltage ...

CM1106 is miniature infrared CO2 sensor module for detecting CO2 concentration.

The KL/A mixed gas sensor (VOC) measures the air quality in the range of 0...100% referring to the calibration gas. For further processing it provides a linear output signal 0-10 V, 0-20 mA, 4-20 mA and a normally open contact. The normal ...

METTLER TOLEDO?s InPro6900i is a brilliant complement for the InPro6900 which is the proven benchmark especially when it comes to food and beverage operations for low oxygen concentrations. Its highly specialized design consists of a ...

This O2 analyzer is favorably priced and can determine the oxygen content online in a reliable and uncomplicated manner. The importance of oxygen is obvious - it is the most thoroughly connected element to life and its measurement is ...

The 499ADO Dissolved Oxygen Sensor is responsible for the constant examination of dissolved oxygen between 0 and 20 ppm. This simple, convenient and easily replaceable membrane features an automatic air calibration and compensation, a ...

The optical sensor FDO? 700 IQ is a D.O sensor engineered for measuring and controlling oxygen concentration in the biological cleaning process of wastewater plants. The sensor employs the optical method in its design. By following this ...

The ClimaBox is manufactured by Imc Group, and is an air quality sensor that is suitable for use in regulating air quality in terms of carbon dioxide that it contains which has been directly connected with sick buildings syndrome. It ...

the BCP-CH4 Sensor is used to examine the production of methane in bio-gas plants, also called a methane digester. It analyses the efficiency in combined heat and power (CHP) plants, even under heavy duty circumstances. It is economical, ...

The Anoxibug by IMC Group Ltd is a Long life electrochemical oxygen (O2) sensor which serves as an insect pest control solution. This tool uses a revolutionary atmospheric control method enabling it to eliminate insect pest coming from ...

The BCP-H2 model is manufactured by Bluesens, and is a hydrogen sensor that is easy to integrate directly into the gas lines. It has a cost effective and robust design, which has an in-situ gas analysis. The unit has a direct integration ...

The Oxygen optode is designed to measure absolute oxygen concentration and % saturation. The optode can be used from streams to deep sea, from fish farms to waste water and from polar ice areas to hydrothermal vents. The lifetime-based ...

Industrial Oxygen Sensors Southland Sensing Ltd. offers an extensive line of quality engineered precision electrochemical fuel cell oxygen sensors. These sensors are offered in a wide range of configurations with analysis ranges from ...

Emerson Hx438 rebuildable steam sterilizable DO sensor provides a choice of four lengths in the range of 120 to 425 mm. The process connection is Pg 13.5. It provides resistance to repeated sterilization of steam. The response time ...

The K1100 from Hach Lange, is a luminescent oxygen sensor that employs an optical sensor technology for oxygen monitoring in power plants. The optical technology of the K1100 eliminates membrane and electrolyte. It also provides fast ...

Alphasense patented Carbon Dioxide sensor is the world's first CO2 monitoring device ideal for safety alarms, combustion gas monitoring and high CO2 process monitoring.Though it is not as accurate as NDIR and not appropriate for IAQ ...

Now you can breathe easy with the unparalleled reliability that Honeywell Sensing and Control (S&C) offers. It comes with a comprehensive range of oxygen sensors unmatched in the industry which are engineered to perform better and last ...

The Orbisphere K1200 is a luminescent oxygen sensor engineered by Hach Lange. It offers an updated method of monitoring oxygen in nuclear power plants. The sensor is based on optical technology that removes membrane and electrolytes ...

Halo Sense lab air quality sensor For the detection of volatil organic compounds Be informed about the air you breathe in the lab Keeps you safe Halo Sense has been designed to continuously monitor the lab air quality for a ...

Dual, triple or quad channel infrared detector for gas analysis and flame detection sensors where more than one element or event is to be detected. Available with reduced microphonic effect JFET or CMOS amplifier Beamsplitter option

The Alphasense Carbon Monoxide are available in four packages 20mm, 32mm, 20mm and a miniature all having their own specialization. The 20mm diameter is the standard on the industry, 32 mm is for fixed site applications. The 20mm diameter ...

Measuring ranges Ambient model: from 0 to 500 ppm Duct mount model: from 0 to 500ppm Technical data ABS housing - IP 65 (duct mount model) and IP 20 (ambient model) 10-digits LCD display 1 RCR relay 3A/230 Vac Red LED in front Software ...

The D series offers a wide array of miniature electrochemical carbon monoxides sensors that are capable of operating through fuel cell technology. These sensors are characterized by their leak-proof feature and optimized detection capabilities. ...