Probes, transmitters and controllers for liquid analysis

LED 25 optical probe is based on a 25mm inner diameter integrating sphere and 1cm? measurement port. It was conceived as a modular system and can be used with distance spacers for "Averaged LED Intensity" measurements compliant with the ...

Instrument Systems provides a range of optical probes for measuring irradiance and illuminance, and also for general coupling of light into the spectrometer. These probes differ in the degree o f light throughout, the spectral range and ...

The TOP 200 has been completely redesigned and is currently based on Pritchard style optics with an integrated alignment camera. Typical uses for the TOP 200 telescopic optical probe include testing of displays and panel graphics. Unlike ...

Liquiline CM442 is a digital multiparameter transmitter for process monitoring and controlling in any application. The 1-/2-channel controller saves you time and money by offering seamless system integration, simple operation and a reduced ...

The OMEGA? pH and ORP differential probes offer precise measurements under the situations that always provide traditional Ph probes inoperable. The probes come with a unified encapsulated 4 to 20 mA 2-wire transmitter to put directly ...

The new wireless temperature/pH transmitter by OMEGA comes with a high-performance radio transmitter, built on top of an advanced microprocessor, with a NEMA compatible enclosure. The item can be used with most pH probes, as well as a ...

Large Auto-Sensing Backlit Display ?Dial-Style? Digital Bar Graph Intuitive and ?User-Friendly? Interface Optional Field Upgradable Relays Warning LED Indicator Custom 13-Character Label Capabilities Factory Reset Capability Description The ...

New from Omega the CDCN-961 conductivity, resistance or total dissolved solids (TDS) controlleris designed for in-line monitoring of process solutions and water applications. The CDCN-961 has a simple menu for easy set-up. Available relays ...

Dual 10 Amp Relays for On/Off Control or Alarms. Selectable Hysteresis 4-20 mA Analogue Retransmission of Measured Conductivity or Temperature Automatic or Manual Temperature Compensation 1/4 or 1/8 DIN Panel Mount Conductivity Cells ...

MAC 100 Multiparameter converter for liquid analytical measurements Unified converter platform for analysis, flow and level Unified user interface Unified service philosophy The MAC 100 has a standardised operating concept, which is ...

The RollerFORM is a phased array wheel probe offered by Olympus. Its designed for handling the inspection of smooth-surfaced materials and composites. An inexpensive replacement for full 2D encoding systems, this probe is an ideal alternative ...

Features Ideal for honeycomb composite skin-to-core disbonds. High sensitivity and crisp signal and response. Detects near side and far side defects in most applications. Compatible with pitch-catch RF, IMPULSE or SWEPT methods. Ergonomic ...

Features: Ideal for honeycomb composite skin-to-core disbonds. Works well to detect disbonds in crushed core conditions. Sensitive to smaller defects. Allows for easy identification of repaired (potted) areas over disbonds. Suitable ...

Advantages Design optimized for weld inspection. Leading edge signal to noise ratio performance. Wide thickness range coverage. New wedge concept allowing improved coupling to the part. Acoustically matched to Rexolite. Typical ...

The Chauvin Arnoux SHT40kV is a hand held high voltage probe. The SHT40kV probe is designed to measure voltages referenced to earth, 40 kVDC or peak and up to 28 kVAC (50/60 Hz) and suitable to be used with any existing multi-meter. ...

Delivering highest sensitivity in small animal in vivo imaging Based on cryogenically-cooled, RF coil desing this cutting-edge technology delivers an increase in sensitivity of in-vivo proven factors of 2.5 to 5.3 over standard room ...

The Standard sample probe is equipped with a flexible collar that inhibits air ingress at the measurement point, thus avoiding reader errors s as well as managing the insertion distance into the gas stream. It is available in various ...

The Accucarb Probe is made for Carbon Potential Measurement. It is made of Zirconium Oxide, and the Carbon potential Measurement device provides highly accurate carbon potential measurements in an easily installed and maintained body.

Zirconium oxide probe for oxygene measurement External electronic within harsh environments: - Available in various lenght - Connectable to the instrumentation OX - Flue gas temperature up to 600?C - O2% Measuring range 0.3... 25% - ...

Zirconium oxide probe for oxygene measurement External electronic under critical process conditions: - Connectable to the instrumentation OX - Flue gas temperature up to 600?C - O2% Measuring range 0.3... 25% - Accuracy 2% - Output ...

The Metrohm high performance conductivity measuring cell are constructed from durable stainless steel and designed for measuring samples with a conductivity of <300 ?s>

The digital CO2 probe EE871 provides a wide measurement range of up to 10000ppm. The diameter of the probe stands at only 18.5 mm and a protection class of IP65. These are just some of the features that make the CO2 probe EE871 the ...

The Leoni optical fibre probes are engineered for spectroscopic analysis. The unit has the ability to spectroscopically examine liquid, gaseous or solid matter. The units measuring head is connected with several outgoing and incoming ...

The optical probes are used in optical transmission measurement, for example in liquids. The two-channel assembly probes (standard version) uses one channel for energy input and a second channel for signal transmission. The probes also ...

FiberTech's Process Probes are two channel assemblies (standard version). The first one is built for energy input and the second one is for signal transmission that is available in different configurations. It's used for optical measurement ...

The M800 multi-parameter transmitter provides simultaneous monitoring for up to four in line sensors using Intelligent Sensor Management (ISM) technology for measuring amperometric oxygen (DO as well as O2 gas), optical DO, pH/ORP, resistivity, ...

The new M300 transmitter features a robust design for pH/ORP measurements with ease of use. The versatile device with solid measurement performance provides an ideal choice for light industrial applications. The designed transmitter delivers ...

The M300 transmitter is a modern device popularly used in measuring or assessing conductivity and resistance. It offers powerful built-in, reliability, efficiency and very convenient to use transmitter. To continue, this top of the line ...

The METTLER TOLEDO THORNTON M300 series of process analytical instruments provide single-channel, multi-channel and multi-parameter models to measure conductivity/resistivity. (Other models are available to measure pH/ORP, dissolved oxygen, ...

The M300 multiparameter transmitter measures from two channels of conductivity, resistivity, pH, ORP, dissolved oxygen and/or dissolved ozone. M300 ISM transmitters measure from one or two channels of the same parameters using Intelligent ...

The Free Chlorine Measuring System is considered one of the best because of its continuous pH correction. This aims to eliminate expensive and messy reagents as well as troublesome sample conditioning systems. Another great thing about ...

Direct Replacement Oxymitter of Rosemount Analytical offers cost effective and easy old probes in general purpose and hazardous locations without risking the possibility for upgrading in the future. It operates on other cables and electronics ...

The OTS is ready for use in two versions, one that utilizes AA batteries and the another one that utilizes 1/2 AA batteries. This contact tool setting probe is applicable for detecting damaged tool and monitoring tool length an diameter. ...

Tool setting in machining increases quality and efficient production as measure and check operation in order to perfect a project. The RP3 probe modernizes machining tools with its 5-way probe for tool setting and some inspection applications. ...

The Primo Radio 3D Tool Setter is mounted securely to the machine tool table and is used to measure the length and diameter of a cutting tool precisely, to increase machining accuracy. There are a number of benefits to using the tool ...

The Bruel & Kjaer Sound Intensity Probe kit 3599 is a compressed system that is composed of two microphone devices. This product is used for gauging noise concentration rating. It is equipped with ZH-0632 remote console and a half an ...

The MM-0012 photoelectric probe can be used in synchronism with reciprocating or rotating machine parts when using the data collector type 2526, multichannel data acquisition system type 3551, signal analyzer unit type 2035, generator ...

The Process Analyzer Sample Probe Assembly or SPA with Conax Technologies Packing Gland or PG is basically for unique applications such as process analysing, flare stack emissions, chemical injection quills, waste water analysis, potable ...

Hamilton Transmitter pH combines ease of use and reliability. It has been designed for universal process application including use in pharmaceutical, chemical, food and beverage industries as well as water/waste water treatment. Sensor ...

Hamilton H100 DO Transmitter combines ease of use and reliability. It has been designed for universal process application including use in pharmaceutical, chemical, food and beverage industries as well as water/waste water treatment. ...

Hamilton H100 Cond Transmitter combines ease of use and reliability. It has been designed for universal process application including use in pharmaceutical, chemical, food and beverage industries as well as water/waste water treatment. ...