Gas sensors

The ZGP2 probe in the Zirconia Oxygen Probe family is designed to have low maintenance costs and measureme oxygen in oxidizing furnace areas. It is available in situ measurement, with no need for a sampling system. The voltage of the ...

The Cl2 series is a line of chlorine gas sensors manufactured by Alphasense. It operates using fuel cell technology. The series comes in three models with different sizes. The A sensor has a diameter of 20mm suitable for portable gas. ...

The VISIC100SF by Sick is a tunnel sensor designed for measuring visibility, CO, and NO concentrations. This device is the only available unit that uses scattered light measurement principle having electrochemical cells. Also, the unit ...

Ozone Sensors The Dextens ozone sensors are ideal for high-precision measurements under harsh conditions. The measurement range varies from trace to saturation level (0.1 ppb to 400 ppm). Its concept and precise mechanical assembly ensure ...

The CarboProbe ZS standard from Econox is a reliable and accurate for measuring the temperature and carbon potential. It is based on the ZrO2 C-700 electrolyte. The device has a dimension of 26 mm and a maximum temperature of 1150?C. ...

Features Exact switching following isochore at all temperatures Excellent vibration resistance No contact bouncing Either stainless steel or aluminium/stainless steel probe Independent, galvanically separated circuits

These sensors are used in ventilation and air conditioning plants to enhance room comfort and optimize energy consumption by providing demand-controlled ventilation. The QPA20.. can be used as transmitters for building automation and ...

Application Domestic safety, Automotive, Industrial safety Target gases Butane, Propane Features * Low power consumption * High sensitivity to LP and its component gases (e.g. propane and butane) * Long life and low cost * Uses simple ...

These probes have built-in transmitters and are powered by low voltage supplies. They are intended for environmental monitoring. The 525 has a Standard Probe type sensor and will operate with a supply voltage as low as 5.5 V. Its output ...

The CarboProbe LT from Econox is designed for flues and boilers where the temperature of the gases are below 600?C. It includes a heater to maintain the sensor at its operating temperature and even if the gas is at the maximum lower temperature. ...

The ECD Dissolved Oxygen electrodes are galvanic cells with a lead anode, silver cathode and either the quick response 2 mil or rugged 5 mil Teflon membrane. The electrode is ready to use as received, there are no solutions or membranes ...

Benefits Active fan sampling ensures highest possible accuracy Fits comfortably in the hand Compatible with 30 different sensors Zero and span calibrate in the field Long life lithium battery technology ...

Trace Hydrogen Sensor (P/N 701) SENSOR FEATURES: ?High sensitivity to low hydrogen concentrations (10 ?1000 ppm) ?Fast response time (15 seconds at 100 ppm) ?Environmental temperature range of ?20 to 50?C ?Environmental humidity range ...

The gas sensor is designed for simultaneous measurement of methane (CH4) in the gas mixture and amounts of heavy hydrocarbons (CxHy)

Ammonia Sensor (P/N 705) Sensor Features: - Detection range of <25 to 10,000 ppm ammonia (NH3). - High selectivity to ammonia. - Minimal response to changing environmental humidity. - Response is unaffected by prolonged exposures to, ...

The VisiFerm DO is the first optical oxygen sensor with integrated opto-electronics, having the full functionality of a measuring device with self-diagnostics. It is steam sterilizable, autoclavable and CIP compatible. The visiFerm requires ...

The VisiTrace DO is designed to measure dissolved oxygen in the low ppb range in brewing applications, notably during filtration and filling. Adjacent markets are also boiler feed water in power plant . The VisiTrace DO offers all the ...

COZIR Ambient (cased) sensors consume only 3.5mW in continuous operation, with two carbon dioxide measurements per second, and are typically 50 times lower powered than standard NDIR sensors. COZIR sensors? combination of extremely low ...

The VisiWater DO sensors are intended for the measurement of dissolved oxygen (DO) in water application. It comes with integrated opto-electronics, having the full functionality of a measuring device with self-diagnostics. The VisiWater ...

The OxyFerm FDA is an electrochemical oxygen sensor suited for applications with high demands for hygiene, e.g. in pharmaceutical industry, in biotechnology and in foods & beverages production. It is available with 12 mm or 25 mm shaft ...

Reasonably priced sensor for water and wastewater treatment applications. Designed for MemoRail applications. The SE 715 oxygen sensor with Memosens connector system requires low maintenance and is equipped with a temperature detector. ...

For detection of air quality in air ducts. The sensor consists of a transmitter with VOC sensor, based on a heated tinoxide semiconductor (VOC volatile organic compounts = mixed gas). Designed for connection to control and display systems.

For detection of air quality in room and office spaces. The sensor consists of a transmitter with VOC sensor, based on a heated tinoxide semiconductor (VOC volatile organic compounts = mixed gas). Designed for connection to control and ...

The SE 740 Optical Oxygen Sensor is mainly designed to provide a good quality performance and functionality for very specific purposes. It is a sensor built through a fluorescence quenching technological system. It is considered as a ...

The DragerSensor IR is a Wheatstone emulator that creates an mV signal and will control the device with the same signal input as what was used before the installation took place. The IR can run with any Drager system and can be linked ...

The advancedSense, DirectSense or WolfPack TOX multi-gas meters of GrayWolf's features the latest electrochemical gas sensor technology with great capability of mobile computer. The GrayWolf toxic gas monitors tackle the power of embedded ...

Thermo Scientific? AquaSensors DataStick is a measurement system for universal plug and play and this oxygen sensor can precisely measure pure water processes. An instant response and reduction in expensive downtime can be achieved by ...

Addressable gas detector for combustible gases GA-300.N is intended for monitoring of CH4 or LPG. Diagnostics of the sensor ensures correct operation by monitoring the status of the sensor and communication lines. Remote calibration ...

ANALOGUE GAS SENSOR FOR TOXIC GASES Gas sensor GA-300.A is intended for monitoring of toxic gases and oxygen. Diagnostics of the sensor ensures correct operation by monitoring the status of the sensor and control circuit. Remote ...

Gas sensors GS-220.B.V-EX are intended for monitoring levels of hydrocarbon gases, organic solvents and their vapors, hydrogen, natural gas, LPG ??and other combustible gases. Different principles of detection with catalytic, semiconductor ...

The InLab Dissolved Oxygen Sensors from METTLER TOLEDO deliver reliable results for measuring dissolved oxygen. The series offers two models, which are the InLab? OptiOx and the InLab? 605. The InLab? 605 is specifically made for ...

Gas sensors GS-220.B.V-TOX monitoring the levels of toxic gases such as carbon monoxide, hydrogen sulfide, nitrogen oxide, nitrogen dioxide, ammonia, oxygen, etc. Using an electrochemical principle of detection provide high selectivity ...

The Mettler Toledo LightEdition (LE) sensors are designed for a number of various applications. The LightEditionare manufactured using the highest quality of standards and combines high performance and cost effectivity. The sensors ...

ADDRESSABLE GAS SENSOR FOR COMBUSTIBLE GASES Gas sensor GA-300.N is intended for monitoring of CH4 or LPG. Diagnostics of the sensor ensures correct operation by monitoring the status of the sensor and control circuit. Remote ...

Gas sensors GS-220.B.V-RF for refrigerants monitor the levels of ammonia and CFCs, HFCs, HCFCs, CFCs and signal in excess of the recommended levels of maximum permissible concentration. Using semiconductor sensor ensure a rapid response ...

The Ammonia Sensitive Sensor (201040) is a probe used to calculate ammonia (NH3) in aqueous solutions. It consists of a pH glass electrode and a reference electrode which are both immersed in an electrolyte. It is evaluated by a hydrophobic ...

ADDRESSABLE GAS SENSOR FOR TOXIC GASES Gas sensor GA-300.N is intended for monitoring of TO toxic gases. Diagnostics of the sensor ensures correct operation by monitoring the status of the sensor and control circuit. Remote ...

Gas sensors GS-ADR.B.V-EX are intended for monitoring levels of hydrocarbon gases, organic solvents and their vapors, hydrogen, natural gas, LPG ??and other combustible gases. Different principles of detection with catalytic, semiconductor ...

Combination use with MLSS Analyzer for biological treatment or MBR process Robust Design -Inert ABS construction Long Term Stability -No Influence by water flow rate

Gas sensors zirconia paramagnetic NDIR with or without amplifier analogue or digital output signals

The TunnelTech 201 Air Quality Monitor, is an essential part of any road or rail tunnel safety system. Firstly, it monitors the atmosphere within the tunnel and ensures that the tunnel ventilation system provides sufficient clean air ...