NDT: flaw detectors, ultrasonic inspection devices...

FEATURES - Mini PDA hand held UT Flaw Detector with light weight 0.38Kg, including batteries - High resolution TFT color LCD display - Automatic zero calibration - DAC and AVG curve - Welding simulation map display, filled waveform trace ...

Hitachi's NS1500Series Disk Surface Inspection System is capable of identifying and detecting surface defects or discrepancies, ideal for substrates and disks. Some of its key features are multiple optical sensors, laser irradiation, ...

Measure distance, height, area, volume fast and easily ? Measurement range: 0.6~15m ? Accuracy: ?0.5%?2digit ? Resolution: 0.01m ? Aperture angle: Approx.?5? ? Laser type: 630 ~ 650nm ? Laser power: =1mW ? Laser class: class ?(US version) ? ...

The RollerFORM is a phased array wheel probe offered by Olympus. Its designed for handling the inspection of smooth-surfaced materials and composites. An inexpensive replacement for full 2D encoding systems, this probe is an ideal alternative ...

20 kHz, 30 kHz and 40 kHz Probe and Hand-held Probe Systems Millennium 20 kHz Probe System Lightweight, portable tools suited for short production runs requiring spot welding, staking, or inserting Machine-mountable and readily ...

Commercial and military aircraft are built by joining overlapping aluminum sheets together with thousands of fasteners. Fatigue cracks on the underlying layers of aluminum are often concealed by the first sheet layer. To guarantee the ...

Olympus propels eddy current technology into uncharted territory in the aerospace industry, with an innovative surface crack detection solution for lap-splice inspection. The structure of an aircraft contains thousands of fasteners, so ...

As a part of its eddy current array solutions, Olympus proposes an innovative pipe inspection kit for stress corrosion cracking detection. Though the results are comparable, ECA technology is much less time-consuming and labor-intensive ...

The USIP|xx is a recent high-end electronics platform manufactured by GE that features Ethernet-connected modules to ensure high data throughput to communicate with the Control-PC, modular design to facilitate maintenance, and offers ...

Phased array testing provides new technological solutions for the corrosion inspection market. These Olympus solutions enable inspectors to be more productive and collect higher resolution data with fully encoded C-Scan imaging. The ...

The Zeiss SurfMax is a configurable inline tester for surface evaluation of three dimensional objects such as ceramic, plastic, matte and glossy metal surfaces. It uses the latest image processing and optical inspection technologies to ...

Bearing Fault Detector Model: 682B05 Price: Call for pricing Bearing Fault Detector (BFD), DIN rail mount vibration transmitter (for use w/ICP® sensor), dual 4 to 20 mA outputs for overall and peak vibration Output Range: 4 ...

Highest Detection Accuracy Thanks to Unique 3-Axis Scanning Technique KW Fault Detectors - Fault Detection Highest Detection Accuracy Thanks to Unique 3-Axis Scanning Technique KW 13TRIO / KW 33TRIO (3 axis) A unique measuring principle ...

Magnaglo is the preferred fluorescent magnetic particle inspection method used for the detection of fine surface and slightly subsurface discontinuities in ferrous materials. Magnaglo fluorescent particles are finely controlled to ensure ...

The Proceq Flaw Detector 100 is a flexible high tech ultrasonic inspection instrument. The basic UT model can be upgraded with the Ultrasonic Time of Flight Diffraction (TOFD) and Phased Array (PA) modes anytime and anywhere on-site. The ...

The WI-2000p by Xiris Automation Inc. is a Laser inspection system designed for welded pipes. This is the ideal tool to be used for tube and pipe application which comes with two important conditions. It may be either of precise forming ...

The Pundit PL-200 is an ultrasonic pulse velocity (UPV) test instrument used to examine the quality of concrete and other materials such as rock, wood, and ceramics. The instrument can provide an extended range of measurement modes ...

A comprehensive selection of magnetic particle inspection machines for NDT non destructive testing are available from DCM Tech. The MPI 2400 is a basic horizontal magnetic particle inspection machine with a swivel coil external prods, ...

The Laser Welding Monitor LWM is a real-time monitoring system for series production and it provides online quality-relevant information about laser welding seam. It detects changes to welding parameters, deviations in the welding joint ...

The failure location is to be known for quick action on weak insulation. The upcoming defects produces measurable partial discharges (PD). Simultaneously the partial discharges also emits electrical impulses and acoustic signals. PDL ...

The ParaDish2 is manufactured by SDT International. It is a parabolic ultrasonic sensor used to detect ultrasonic phenomena at larger distances (5 m to 100 m). ParaDish2 has ultrasonic signals, which enable leak detection on compressed ...

The Ultrasound Detector SDT270 is mainly constructed to provide a good quality functionality and performance. The cavitation left in a machine is capable of creating sounds which is very easy to determine. The high quality device is mainly ...

The ever-increasing demand for global quality control of the entire production requires technical solutions that can guarantee the best performances at a reasonable cost. An original and safe method to achieve that result is by integrating ...

The Ultra 3 by Pulsar Process Measurement is an ultrasonic open channel flow meter which features its reliability in measuring. It comes with a wall, panel, fascia and 19" rack mount. For this specific model, it offers a non contacting ...

Random-sample testing in bolted joint assembly processes Random-sample testing is performed in bolted joint assembly processes to monitor the interaction between the assembly tool (driver) and the bolt. For these tests a torque/angle ...

TORRESSONIC concept provides a harmonic set of accurate, stiff and reliable mechanics, control electronics and software subsystems, working together to make an advanced ultrasonic unit to scan a part capturing data according to a defined ...

Wireless Sensor for Overhead Lines Apply the WSO wireless sensors for overhead lines to improve distribution system reliability by remotely monitoring circuits for faults and outages. Using centrally reported data, dispatch repair personnel ...

Cronosonic is an instrument for ultrasonic pulse velocity surveys allowing you to carry out measures through direct, indirect and semi direct method. The very compact instrument is provided with display for the visualization of the time ...

-SPECIFICATIONS - - Resonant frequency: 52 KHz - Safety seal attachment - Watertight: 150 m - Stainless steel case - Length: 120 mm - Diameter: 32 mm

The economical version with one resonator The SinglePush transducer with only one driverhead is the less expensive version of the PushPull? transducer. At the SinglePush transducer only one resonator creates the total power.

BEACON Field-Programmable Timed Reset The BTRIP is designed for 4160 V to 69 kV overhead system applications. It is quick and easy to apply using a single hot stick. A super bright flashing LED display provides clear indication of an ...

Monitors the ultrasonic frequnency and power intensity at various positions throughout the cleaning tank. Provide data for statistical process control Provide early warning of deterioration in performance Provide understanding of ...

the OD measuring range is 20---125mm 1. Application scope: gas pipe, water supply pipe, catheter and medical catheter. 2. Used for the uninterrupted measuring and monitoring for the change of thickness, outer diameter, eccentricity and ...

The Ultrasonic Thickness Meter can accurately measure the thickness of steel (ferrous metals) using sophisticated non-invasive ultrasonics. Using the RS-232C interface and software results can be logged on a computer. Measures: Stainless ...

GEKKO is the first phased-array system able to drive matrix arrays and real-time custom Total Focusing Methods (TFM). GEKKO also handles most UT inspection techniques, and benefits from the latest CIVA features natively implemented. matrix ...

The UDM 300 is an extremely robust and easy-to-operate device for monitoring flows temporarily. The non-invasive installation of sensors on the outside wall of the pipe takes only a few minutes, yet the recorded data have a very high ...

The detection side has to be between 3 and 6mm. from the lower stainless steel sheet, having special care that both sides remain totally parallel. · The equipment subjection, as well as the lower structure must have a solid subjection, ...

The UDM 500 is a portable ultrasonic measurement device, especially designed for the tough circumstances on site. The small, light weight and modern housing ensures a comfortable working. Due to the non-invasive clamp on technology the ...

The cyberSCAN VANTAGE 2 is a non-contact surface metrology system. It combines high resolution confocal sensor technology with a x- and y-translation stage. The system can measure large areas up to 200 mm with maximum x-, y-, z-resolution. ...

The U top is a comprehensive ultrasonic testing unit, geared to deliver precise measurements of ultrasonic waves. The unit can be assimilated with a PC, thus enabling the provision of multiple additional inputs and outputs. This allows ...

The multi-element probe, manufactured by Optel, is a phased array application-specific probe specifically designed with a frequency range from 0.5 MHz up to 5 MHz. It has a voltage supply of 700 V, minimal diameter of 1 mm, impedance ...

The Opipe represents a comprehensive system for the control of plastic pipes during the production process and includes an industrial computer, equipped with a touch screen, ultrasonic card OPCARD2.0, multiplexer OPMUX02, set of ultrasonic ...

The AXFQ series is a x-ray flaw detector developed by Angstrom Advanced. It is built mainly used for non destructive testing. The unit offers excellent and clear images. It is also ideal for thin iron plate, aluminum material, rubber, ...

The SND40 is ideally designed to provide a good quality performance and functionality for very specific purposes. It highly provides an ultra-high reliability in Weld Seam Detectionand. Due to the advantage incorporated within the device ...

The modular UFD40 is especially used in detecting defects, butt welds and mechanical connections on wires, tubes and cables. The device is created using non-destructive testing. In order to have an accurate detection, the measurement ...

SONOSCAN ergonomically designed angle beam probe series are primarily used for non-destructive testing. Part of the series are developed for monitoring cracks and occlusions in metals and can be used comfortably during weld inspection. ...

Description Machine with no pressure hot air welding wheel, servo motor drives, industrial camera orientation detection, automatically remove damaged cells. May need to set the cell spacing, the number of single-string cells, soldering ...

These products have been designed specifically for security and maintenance purposes. They are perfect in maintenance program because there are very accurate and easy to use. Whenever a flaw appears inside the insulating equipment, partial ...

Developed and engineered by NDB Tech, the ULD-40 ultrasonic corona/arcing detector is specially designed for predictive maintenance in electric utility industries. Specifically, the product is optimized for programs dealing with high ...

Features Latest ultrasonic flaw detector from SIUI, incorporates the latest advancements in high-performance Phased Array and TOFD detection into one compact and durable unit. SyncScan can be upgraded with Phased Array and TOFD to satisfy ...

Features New generation of ultrasonic flaw detector from SIUI, with modular design and more powerful functions. The SUPOR represents the persistent fine tradition of SIUI: innovative technology, advanced process, small size, lightweight, ...

GapGun is a handheld optical measurement system which has been designed for the fast and precise, non-contact measurement of scratches, chamfers, radii, steps, gaps, angles and more. The system is exceptionally quick and simple to use, ...