Form and surface measuring instruments

The SPG-1000 digital surface profile gauge will allow the peak to valley height of blast cleaned surfaces to be accurately measured. The surface profile gauge is initially set to zero plate and the foot is then placed on the blasted profile. ...

The 3D measurement system performs contactless dimensional gauging, using laser line profilometry technology. The system can achieve a measurement resolution and scan speed that allows to virtually reconstruct 3D objects in few seconds ...

The HRP-350 is an automatic, sophisticated surface outline topography metrology instrument, comprising maximum resolution/elevated-aspect ratio, stylus-derived surface outlining for most important edge 300mm uses. This surface outline ...

Variable 3-disc indicating gages VD measure the circumferential backlash and that would be in relation to the maximum effective tolerance limit. For good measure as a result of this, the circumferential backlash measuring instruments ...

Very High Speed The sensors are intended for non-contact measuring and checking of position, displacement, dimensions, surface profile, deformation, vibrations, sorting and sensing of technological objects as well as for measuring ...

The URM-K is a rotation inspection instrument engineered by Frenco. It is suitable for inspecting profiled components, such as profiled shafts. The instrument is placed on the shop floor next to the production machine. This location ...

MicroTest HS-P Concentricity measuring system Automatic concentricity and roundness inspection system for ferrules and sleeves

The StraDex a serves as a non-contact alternative for roughness measurements metrology. The unit is suitable for use in 3D micro-topographies, 1D roughness in sub-nm range, and 2D roughnesses. In addition, the device provides an acquisition ...

Measuring station: recognition and verification The measuring station identifies if the combination of the incoming wheels and tires is plausible and if it corresponds with the chosen recipe. There are several ways for product recognition, ...

The Smart_Shape of Smart Vision is a unit that is made to create a complete and automated quality check of cut lens shape. It offers objective and high accuracy measures and assessment of the shape of the lens. It automatically assess ...

Uncompromised Imaging and Metrology for Widest Range of Surfaces Combining exceptional profiling performance, operator convenience, and affordability into one bench top instrument The ContourGT-K 3D Optical Microscope sets a new industry ...

The I-Dex ta is a roughness and micro-topographic measuring machine developed by ISIS Sentronics. It is built with non-contact optical metrology suitable for a wide range of applications. The unit comes with 1D and 2D roughness in sub-?m ...

Profiling line Our profiling line forms the ?blank? into a perfect round wheel with the desired profile. This process contains the following production steps: > Flarepress > Flaexpander > Flowformer > Rimrollers > Rim edge conditioner > ...

The Laser Profilometer can be used for quantifying geometrical parameters of wheel flange and tire thickness. It comes with an integrated RF603 laser module that is positioned inside its casing. This performs linear scanning of the wheel ...

The The Dektak XT? stylus profiler, manufactured by Bruker, has an innovative design that provides optimum consistency of under five angstroms and up to 40% increase of scanning speeds. It incorporates capabilities that enables the critical ...

The Filmetrics F42 can map the thickness of films, such as OSP, at over one-million points, each with a spot size as small as 3 microns. Using an integrated CCD camera, live video makes it easy to pinpoint exact measurement locations. ...

PDA based handheld instrument is employed for laser scanning and measurement of brake disks wear parameters. The device is supplied with database and software package for disks wear data storage and processing.

OptiSpheric? is the industry?s standard for lens testing and is used worldwide to completely measure and qualify optical components and systems. The world?s largest laboratories and the major optical manufacturers are trusting the TRIOPTICS?s ...

Portable laser rail profilometer (PRP) is designed for non contact registration of cross-section of the railhead acting face. The main functions of PRP are: ? obtaining the information on the cross-section profile of the working railhead ...

World's First Automated Bench Top Profiler with Tip/Tilt Head Delivering uncompromised, gage-capable, measure-on-demand reliability to R&D and production environments. The ContourGT-I 3D Optical Microscope combines over three decades ...

3D-Shape GmbH presents ?KORAD3D, a flexible and robust optical 3D measurement system for micro-scopic applications. User-friendly interfaces enable simple use: ? Direct control via laptop ? Remote control via DCOM interface ? Application ...

The Drop Shape Analyzer ? DSA25 from KR?SS is an easy-to-use, reliable instrument for measuring contact angle. From a simple wetting test to the accurate measurement of surface free energy, the robust instrument provides flexible options ...

Automated, Gage-Capable Metrology for R&D and Production Providing world's only self-calibrating, fully automated solution for production line metrolgy. The fully automated, large-sample ContourGT-X 3D Optical Microscope combines ...

- High-speed surface and cross-sectional inspection - Online 3D measurements, GD&T and imaging - Long stroke profilometry with sub-micron resolution - Thickness, roughness and vibration measurements - Fiber-based probes which reach into ...

A new generation of digital optical profilometers to be used right onto the factory floor Our goal with the MP1 Series of digital optical profilometers was a challenging one: to automate measurements by sampling and archive the results ...

The Drop Shape Analyzer - DSAHT from KR?SS specializes in the precise high-temperature measurement of wetting based on contact angle and surface tension. Materials such as metals, glass or ceramics in molten form can be investigated using ...

From the highly recognized and world class brand of Nikons innovation is proprietary scanning-type optical interference measurement technology achieves height resolution. Nikon provides a variety of optical microscopes as measurement ...

The W?rtsil? iPhase? profiler measures the oil-water interface, providing accurate measurements of water conductivity and thereby the oil in water profile inside hydrocarbon separators.

Widely used in production site to measure surface roughness of various machinery-processed parts. * Be compatible with the principles of ASTM D 4417-B, IMO MSC.215(82), SANS 5772, US Navy NSI 009-32, US Navy PPI 63101-000. When measuring ...

The LJ-V series is the world's fastest 3D laser inspection system at 64,000 profiles per second. It is a blue laser optical system equipped with 74 discrete measurement modes. It has an easy 3D display function and grants continuous profile ...

OptiTrace 5000 Asphere Measurement System is a unique solution for the measurement of aspheres, cylinders and freeform precision optics. The integration of OptiPro's custom asphere analysis package, ergonomic environmental enclosure and ...

Profile360 is an in-line, real-time, non-contact measurement system for continuously monitoring key profile dimensions in complex shapes such as rubber, ceramic, plastic, and wood-plastic composite extrusions, roll-formed metal profiles, ...

The manual machines with or without a base disk are a TECHNICAL ECONOMIC alternative for the measurement of gears. Once the instruments are retrofitted shall remain valid and up to date. The our technicians are able to update your gear ...

Mitutoyo Formtracer Extreme CS-5000CNC is a stylus type CNC surface measuring instrument. It provides highly precise, simultaneous measurements of surface roughness and form/contour. Maximum drive speeds are 40mm/s for X1 and 200mm/s ...

Measured values: particle size, particle, particle size distribution; Analyzed materials: for liquids; Other characteristics: automatic; Functions: sizing, with counting; Domains: laboratory, industrial; This instrument is a dynamic ...

Surface Roughness and Contour Measuring System Equipped with a wide range and high resolution Z-axis detector. Measuring range Z1 axis (detector): 5mm (Resolution: 0.0008?m *Applicable when the measuring range is 0.05mm) X axis: 100mm (Resolution: ...

Measured values: particle size, particle, particle size distribution; Analyzed materials: for dry powders; Other characteristics: automatic; Functions: sizing, with counting; Domains: laboratory, industrial; This instrument is a dynamic ...

Flexible digital gauge system for multi-point measuring. Up to 64 connectable gauges Input resolutions : 0.1?m, 0.5?m, 1?m, 5?m, and 10?m. Compatible with RS-232C, BCD Operating voltage : 12-24VDC DIN rail mounting (35mm)

The PGI Dimension Series, manufactured by Taylor Hobson?, is a surface profiler that gives the 3D form a precise measurement in hollow and lofty aspherical lenses as well as modules in a less than 2 mm up to a diameter of 300 mm. It has ...

The NanoCam Sq dynamic optical profiler measures surface roughness on small and large optical quality surfaces. The non-contact NanoCam Sq replaces slow, messy replication methods required with traditional workstation optical profilers. By ...

The PGI Matrix is the perfect all-around instrument for fully automated 2D and 3D form metrology of optics ranging from small, mobile phone lenses to large astronomy optics. Our productivity tool kit, offers a unique advantage for ...

The QTubeScan Model of Non-Contact Tube Measuring Machine, manufactured by Kurschat GmbH, features a measuring rate of 20 kHz and has a storage of calculated data in QS-data files. This machine can generate with a short calculating time ...

The PROFILER is designed to register the internal corkage profile of wine and champagne bottles, and of all bottles having a long neck. The PC displays the internal profile curve and stores the data on exportable formats (ex. Microsoft ...

Following its first release in 1984, the Form Talysurf quickly became the number one tool for optics manufactures in measuring aspheric form error. Since then, we have installed thousands across the globe becoming a true industry standard. ...

High-accuracy CNC contour/form measuring instrument. The X1-, Y- and Z2-axes have a maximum drivespeed of 200mm/s. This permits high-speed positioning that can potentially result in a large increase in the throughput of multiple-profile ...

The Form Talysurf PGI 420/820/1220 Series, manufactured by Taylor Hobson?, which is a surface profiler that measures rough, wavy and contoured curved spaces. It supplies a wide range of measuring system that includes a specified line ...

The CAMSIZER uses a unique two-camera system to provide an accurate and speedy measurement of pourable solids in the range from 20 ?m to 30 mm and is capable of parallel evaluation of particle size distribution, particle shape and additional ...

The Hommel-Etamic F50 measuring system is ideal for measuring the roundness of your workpieces. The compact table-top unit is extremely robust and durable, making it suitable for even the harshest industrial production environments. The ...

The PosiTector SPG Surface Profile Gage measures and records peak to valley surface profile heights. Conforms to ASTM D4417-B, AS 3894.5-C (with optional 30? tip angle), U.S. Navy NSI 009-32, SANS 5772 and others. Simple Fast measurement ...

Flatness control This equipment typically includes a measuring roll or contactless measuring beam, a signal control cubicle and a screen for measurement display. The measuring roll%2

The PSG measures following properties of the material: Width Camber measurement Edge Profile measurement Length measurement By measuring the plate contour behind the cooling bed, the subsequent processing steps of crop cutting, trimming, ...

The Hommel-Etamic F135 und F155 form measuring instruments are ideal for checking the roundness and cylindricity of precision parts. To allow continuous documentation of the quality of your production output, you can create professional ...

Model 3523 Semi-Automatic Gear Inspection Machine Best Use Semi-Automatic inspection machine can be used for audit inspection or inline inspection for measuring composite, runout, nicks, size, tooth action, lead and taper. Very versatile ...

PosiTector RTR Replica Tape Reader - Digital spring micrometer measures and records peak to valley surface profile height using replica tape. Simple One-handed menu navigation RESET feature instantly restores factory settings Automatically ...

The HOMMEL-ETAMIC roundscan 5xx from JENOPTIK is a device that can measure combined form and roughness. Engineered as a form measuring instrument with an innate ergonomic design, the HOMMEL-ETAMIC roundscan 5xx features a fully automatic ...

Contact type-scanning measurement with PC based system and SPC facility Horizontal or Vertical system. High resolution linear and angular encoder for precise data collection. Angular position of all Cam lobes with respect to key way/ ...

Machine TYPE 1? Dimension range: Bearings ? 20 180 mm. Height 4 40 mm. Machine TYPE 2? Dimension range: Bearings ? 100 - 360 mm. Height 16 58 mm. Performances: - Ball presence check ( except for blind bearings) - Blind bearings ...

The specific machine design of the FMS8200 spindle measuring machine with a rotating probing system and five measuring axes offers you a flexible solution for the automated measurement of all form and positional tolerances on large and ...

Monitoring technology for production and workshops Corner force measurement on the test stand? This means one thing above all: reduce measurement differences to a minimum in order to ensure maximum precision! MULTIRAIL? CornerLoad uses ...

The OCA 15EC is the entry level measuring device for professional contact angle measurements and drop shape analysis. The OCA 15EC can be easily disassembled for transportation in the optional case. For a convenient access to the surface ...