Motion controllers

The SPiiPlusSC PC-based machine and motion control software provides demanding machinery with the highest performance possible at the most affordable price, leveraging on the processing power of modern PC technology and on the connectivity ...

DSM's VF-90 linear piezoelectric amplifier module provides functionality for driving piezoelectric (capacitive) loads in an extremely compact form factor. The single channel module is designed into National Instruments' CompactRIO ...

The LCC-10 Series of Single-Axis Brushless Controller with Built-in Amplifier, manufactured by SMAC Moving Coil Actuators, is specifically designed with single and multiple configuration. It is provided with RS232 and CAN Open interface ...

HIRSCHMANN Indexing and Rotating/Indexing Tables can be controlled directly through the machine control. If this is not possible, they can be controlled by the HIRSCHMANN Control H1625. For the easy and quick integration into the machine ...

The CLPC is used to control a Posidyne Clutch Brake on cycling applications where very accurate stopping position is critical. Often when using a clutch brake in this application a limit switch or PLC is used to set the stop position. ...

This item is suitable for controlling high response valves with installed electronics, but there are various applications. The amplifier comes with additional electronics, while the analog amplifiers in European format are suitable for ...

ACSs SPiiPlusNTM is a state of the art EtherCAT network-based, multi-axis machine and motion line of controllers. It is specifically designed to extend the capabilities of the SPiiPlus line of controllers, to address the needs of modern ...

The PMX-4ET-SA by Arcus Technology is a Stand alone multi-axis motion controller which comes with a 10 Mbps Ethernet Communication and a 6M maximum pulse rate output. In its acceleration, it can do either Trapezoidal or s-curve. Also, ...

Motion Control Business to Meet the Global Needs Yaskawa Electric?s technology and products are used in diverse fields including semiconductor and FPD manufacturing, chip mounters, machine tools and general industrial machinery. Representative ...

The technology module MC 2000 motion coordinator can control up to four servo axes of the ARS 2000 servo drive series in a multi-axis-coordinated way. With the MC 2000, complex motion control can be realised fast and easily, e.g. Electronic ...

Multi axis motion control software and hardware package, offering extensive programming capabilities that have been successfully implemented in a variety of automation and robotic applications. softMC is designed to seamlessly integrate ...

The motion controller is manufactured with multitude features. It features freescale power PC P2020 microprocessor (1.2GHz, dual-core) and up to 32 interpolated axes, driven through Ethercat or CANopen fieldbus. The device os equipped ...

The PSEP/ASEP controllers are different from the conventional controllers. They require very few movement positions and are used for applications where the actuator travels only between two or three points normally seen in air cylinders. ...

The Maxi-Tronic MaxiScan 12M Controller provides essential protection for elevators, conveyors, and other equipment in a compact and easy to use unit. ? Underspeed Motion ControllerNew MaxiScan 12M Bearing Sensors Belt Misalignment ...

Motion Controllers for a new generation Feel the Power Decentralised intelligence and the capacity for real-time communication with higher level process control technology and flexibility in usage applications are requirements for cutting-edge ...

The IMC4 by Imes-Icore GmbH is a 4-axis stepper motor driver which functions as a firmly mounted plate that is located in machine rear wall. It features its easy to operate machine cutting of different materials such as wood and plastic. ...

The smallest 4-axis Motion Controller in its performance class Introducing the softMC 3, a compact full-featured motion controller for up to 4 axes, with industry-standard communication interfaces. Servotronix introduces the softMC ...

The product weighing 0.5kg is extremely compact with 163.5x60x26 dimensions.The position, current and speed loop is closed by IMD. The power supply is maximum of 750DC and maximum of 2KW. The auxiliary power supply is between 18 & 48 ...

The MC464 is Trios highest performance and most flexible Motion Coordinator and is based on the 64bit 400MHz MIPS processor making it ideal for high axis count machines or robotic applications. The MC464 supports up to 64 axes of motion ...

The MSEP Series, manufactured by IAI, is an 8-axis compact controller equipped with DeviceNet, CC-Link, PROFIBUS-DP, MECHATROLINK, and CompoNet connection interfaces. It has a height of 115 mm and width of 123 mm. The compact controller ...

Motion Control Systems FAULHABER Motion Control Systems combine the high performance of a FAULHABER brushless motor with tailor made drive electronics to create the industrys most compact integrated motion solutions. Whether it?s precise ...

PEPS II is an impressive item, which was built on PEPS (Precision Electronic Positioning System) patented by TMC. In addition to this, the new digital controller is extremely easy to use and comes with more features than ever before, ...

The I-Mark Black Box controller provides motion control to any dot-peen or scribe system. It features, all the functionality of the I-Mark controller including the selection of communications options and the advanced networking capabilities. ...

The SMC series is a control system manufactured by TRM. It is a multi-axis controller with a LCD screen and a keypad. It is suitable for controlling many different types of machine machines with and without the need for motion control. ...

The motion control board is manufactured by Robox, and is capable for Parker Hannifin drive, which utilizes microprocessor of power PC Motorola MPC5200 in 400 MHz to 760 MIPS. It also utilizes up to 32 interpolated axes, which is controlled ...

ROBO Cylinder Position Controller SCON Series, 6-axis Specification Combining six RCS2/RCS3 position controllers into one unit. Space-saving, low-cost, and easy to use. MSCON controllers can be connected directly to key field networks ...

The MT600 Motion Controller is a compact and full-featured underspeed motion monitor and control system for your material handling equipment. This early warning and control system provides superior dual-setpoint protection for bucket ...

Path control and interpolation To manufacture for example a workpiece, for path controls (whether 2D or 3D) the axes of your machine have to be guided simultaneously in certain directions. This task is taken over by the PA-CONTROL ipo. The ...

Integrated Motion Controller FAULHABER Integrated Motion Controllers combine high performance single axis motion controllers with the benefits of FAULHABER Brushless DC Servomotors to provide the industrys largest portfolio of integrated ...

The PMC controller runs the proprietary operating system called Blackthorn. This gives the users a very stable and fast embedded platform to run user programs on. User programs can take many forms and some customers prefer to have their ...

MotionOne CM is a controller that is perfectly integrated into the LTI Motion multi-axis system. Scalable motion control Technology packages specific to their application Safety control Flexible communication ...

The Squiggle Motor driver from AMS is a piezo motor unit that employs a low voltage DC supply with a high frequency AC voltage that can power up piezo motors. This device makes use of conventional I?C communication setups. Moreover, this ...

Up to eight axes, in any combination of single-axis, Cartesian and SCARA robots, can be connected and operated in an interpolation mode. This configuration reduces the installation space and equipment size compared to when two conventional ...

The MT400 series is a complete monitor and control system for all your material handling MT 400 Motion Controllerequipment. Features: Large digital display Accepts industry standard PNP sensors Dual setpoint, with separate ...

PA-CONTROL Touch - positioning and sequential control Features - 47 parallel programmes with subprogramme technology - freely programmable graphical user interface - generation and integration of own graphics - language-independent illustration ...

Motion Controllers FAULHABER Motion Controllers are easy to use single axis positioning controllers tailor made for the control of FAULHABER DC, Brushless, and linear motors. For high resolution dynamic positioning applications, or ...

The RBD Series DC input stepper motor driver is a high current, high performance bipolar driver with advance microstepping motor control. Advanced Microstepping Drive 1.8? ~ 0.014? (up to 128 step Divide) 20 ~ 75 VDC Input 0.09 ~ ...

This original and outstanding TOYO CNC equipment provides the control functions that internal grinding machines need, and fosters a user-friendly operating environment. Equipment that brings further enhancements in productivity and safety. ...

Ampere: 4, 8, 12 A

MotionOne CP is a modular controller based on the same platform as the integrated MotionOne CM controller. Scalable motion control Stackable IO system Coconnect Application-specific technology packages Flexible communication ...

The controller cards are inserted into the card slot of the KW compact inverter module. The digital signal processor on the card implements the complete closed-loop drive control, including all monitoring and communication functions.

Current: 5 A
Output voltage: 70 V

The EZ521 Controller provides underspeed detection for your bucket elevators, ez500drag conveyors, screw conveyors, and other rotating equipment. This all-in-one unit has dual-setpoint 10% and 20% slowdown relay outputs, status and alarm ...

PA-CONTROL Smart - Positioning and sequential control Features - 16 axes can be controlled in a network by CANopen - 31 parallel programmes with subprogramme technology - many options and expansion options - all plug connections can ...

Design Features Expand scanner field of view without sacrificing effective pixel resolution Mark long vectors with one continuous pass Draw large-scale graphics without stitching multiple exposures Mark on a tube or other ...

The STP60 Series of Microstepping Driver, manufactured by Dynamic Motion SA, features an output current controlled chopper with 16 microstep/step. This driver has two outputs NPN of 50 mA, and has 6 inputs analog of 12 bit and 0..30 V. Moreover, ...

The strengths of the AMKAMAC A-series are fully demonstrated in both central and modular machine control system concepts. The use of the EtherCAT real-time fieldbus means there are practically no more restrictions on the number of nodes ...

The PA-CONTROL Unit in connection with up to 4 LV-UNIT - or via the CANopen - permits control of up to 16 axes. You can determine which axes are controlled synchronously, asynchronously or interpolating. axes max. 16 CANopen-axes max. ...

Network drives through a high-speed serial interface to coordinate up to ten axes of motion Coordinate motion using up to five independent tasks Drive and control linear or rotary brushless, DC brush servo, and micro-stepping ...

The SRP Series, assembled by Von Rohr, is a pneumatic positioner that features a compact design for a space friendly installation. This apparatus is capable of being installed in any position from vertical to horizontal. This pneumatic ...

The Tinaxis Plus STP60DB is a stepper motor controller engineered by Dynamic Motion. It features movement types of speed and positioning. The unit is equipped with an amplifier. It is programmable with BASIC. It operates with a voltage ...

The HCU-3D Series manufactured by SmarAct is a SCU controlling system. This device is characterized as a stand-alone instrument that has a capacity to control until three SmartAct positioners. Additionally, this device also has the capacity ...

The DMC-40x0 motion controller is Galil's highest performance, stand-alone motion controller. It belongs to Galil's latest generation motion controller family: the Accelera Series, which accepts encoder inputs up to 22 MHz, provides servo ...

Input voltage: 30 V
Current: 8.5 A
Output voltage: 520 V

With the PA-CONTROL Single, an axis can be controlled with a stepper motor. In connection with the 16 in- and 16 outputs available in the standard design, the PA-CONTROL Single can autonomously control an axis or a complete plant. 2-phase ...

Up to eight integrated drives in one stand-alone controller Additional external drive axes can be added to provide up to ten axes of coordinated motion Controller architecture capable of coordinating motion of up to five ...

Omron's easy to use, high-speed H8PS cam positioner is enhanced with operation speed reaching 1,600 r/min and high-precision setting to 0.5? with advanced angle function that compensate for output delays. Available in compact 8-, 16-, ...

The Pneumatic positioner 800 SRP and SReP series can be installed in either horizontal or vertical layout. It has a compact design and features high mounting compatibility with Namur building operations. This positioning solution obtains ...

This motion control system is stand-alone or externally controlled, easy-to-use, plug-and-play and cost effective solution for motion control applications. Each system includes the power supplies, controller, the servo motor drivers. This ...

The CU-3D is a map of multi-axis motor control, manufactured by SmarAct. This product is designed without manual control elements, display and housing. It is a single-board version of the HCU-3D controller, and is commonly used for original ...