Measurement microphones, Acoustic sensors

The iFm Intelligent vibration switch features an analogue output switch that shows monitoring, display and recording of vibration data in one compressed field unit. The product also offer a convenient installation using its pushbuttons ...

The IFM VTV122 Vibration Transmitter is designed for continuous vibration monitoring of machinery and equipment in accordance to ISO 10816 standards. It senses the true rms velocity measurements of non-rotating component surfaces, with ...

Frequency: 44 kHz
Distance range: 0.3 m - 8 m

Siemens SITRANS DA400 acoustic sensor is ideal for continuously monitoring positive displacement pumps of oscillating-piston type. The tiniest of leaks in the delivery valves is found out by the diagnostic system. This early detection ...

SITRANS AS100 is an acoustic sensor used for solids flow detection, changes in high frequency sound waves from equipment and materials in motion. It detects and reacts instantly to changes in solids flow to warn of blockages, product ...

Contact transducers are single-element longitudinal wave transducers, intended for use in direct contact with a test piece. This product is one of the best, being suitable for various applications in the industry. The advantages of using ...

The Dual Element Transducers, assembled by Olympus, are flaw detectors having a Pseudo-Focus mechanism that improves the resolution in the focal area. The dual angled components of the device produce a V - Shaped sound path in the test ...

The immersion transducer is a single element longitudinal wave transducer with a 1/4 wavelength layer that is matched acoustically to water. It is created for transmitting ultrasound in applications with test parts that are fully or partially ...

These High Frequency Transducers manufactured by Olympus, are specifically engineered to create ? 20Mhz frequencies. These are available in 3 different delay line configurations namely, BA, BB, and BC. All these configurations allow various ...

TMST 3 is an electronic stethoscope that comes with pinpoints bearing and machine noise and those who need it can use it for the determination of troublesome machine parts by vibrations and noises used for identification. The device includes ...

Sonar device FAG sound detector is used to check the noise of the rolling bearing in a quick and easy way. The changes in the noise may be due to the formation of pitting or wear or distortion of the bearing, which can be detected with ...

Type 4138-A-015 is developed to measure high-frequency in restricted spaces. Its uses comprise of measuring high-frequency, and also measuring PULSE. It is used for applications that need a high degree of spatial resolution or where ...

Br?el & Kj?r 4182 probe microphone features a smooth frequency response ranging from 1Hz to 20kHz. It also has a smooth rolling off of high frequencies. It is suitable for measuring sound pressure in areas where use of regular microphones ...

The Type 4192-B-001 is intended for accurate measuring and quantifying of ANSI noise and coupler meters. It is an integration of a ?-inch pressure-field microphone and a Type 2669-B pre-amplifier. It is equipped with a polarization rate ...

Type 4949 is manufactured to evaluate the exact surface pressure, particularly in vehicle applications. It is absolutely perfect for mounting straight on the car surface while wind-tunnel tests and also for simple evaluation in cramped ...

This pre-polarized microphone is suited for use in various systems, particularly those that require a large number of microphones, such as beam-forming arrays, non-stationary and regular STSF measurements and others. The microphones ...

The M2230-WP is a weather-protected microphone solution allowing acquisition of environmental noise data in outdoor applications. The corrosion-free polymer housing, wind screen, water-repellent membrane and bird spike provide excellent ...

The main ide behind the designing of the RS1 Needle contact sensor is measuring of structure-bone ultrasounds in the industrial environments. It is the generic purpose sensor for monitoring the machines. It allows to take measurements ...

The M2230 is a measurement microphone. The specifications of the series complies with IEC 61672. It fulfills all the class requirements provided. The series emits low noise floor of 16 db (A). The device supports accurate and linear measurements ...

The SDT270 Magnetic Sensor is manufactured by SDT, and is a structure-borne ultra-sonic sensor generally designed with a powerful built-in magnet. Furthermore, this sensor, capable of being easily affixed on metal panels/pipers, features ...

The H505L from Meggit is a hydrophone that is developed as a small, flexible, self-amplified device for general purpose application to wide types of underwear acoustic measurements. In addition, the device offers with robustness, cost ...

The HD WME Series manufactured by DELTA OHM is a microphone device. It has the capacity to monitor outdoors with a long duration operation. This device is equipped with a pre-amplifier and a protective membrane coating wherein it caters ...

In recent times, the AE monitoring utilized flexible level limits, restricted to reasonable simple grinding wheel profiles and machine functions. The ExactDress? system from SBS allows accurate overseeing of complicated dressing functions ...

The in-spindle AE is a sound sensor for grinding machines. This product is a non-contact and come int two formats. It has two different types namely telescopic type and spiral-cable type. The telescopic types contains a slide tube that ...

Its a device used in grinding process when AE contact is needed. These situations happens when machine design or high frequency , mechanical or electromagnetic noise does not allow the usage of other AE sensor types. It uses the coolant ...

The Mini AE sensor is useful where space is at a premium, or direct contact with the rotating part of a grinding or dressing spindle is necessary but a spindle bore is not available. It is a non-contact sensor and can be bolted on either ...

In recent times, the AE monitoring utilized flexible level limits, restricted to reasonable simple grinding wheel profiles and machine functions. The ExactDress? system from SBS allows accurate overseeing of complicated dressing functions ...

Stethoscope for use in machinery maintenance and repair Frequency range 100 Hz to 10 kHz Volume adjustable Power 9V battery Enclosure ABS Operating temperature -10 to 55?C Dimensions 206 x 50 x 32mm Sensors (attachable) ...

The cleaning transducers, designed and produced in SinapTec?s premises, are engineered for optimum vibratory amplitude and yield to clean particles from some microns up to several hundreds of microns. The transducers are bonded on ...

The direct contact ultrasonic transducer is manufactured by PBP Optel. It has bandwidth ranging from 2 up to 25 MHz and minimal length of a pulse of 20 ns. It also features a diameter from 1 mm up to limited by available ceramics. Furthermore, ...

The Optel shear wave ultrasonic transducer is primarily applied in studying the physical characteristics of varying components.

The Sonoplate? is manufactured by Weber Ultrasonics Group, which is a ultrasonic plate transducers that is suitable for use in equipping cleaning tanks, and as well as retrofitting existing tanks in areas with limited space. They are ...

The Model M/02 is a Piezo-Electric-Microphone. It is well suited for combustion gas acoustic and air blast measurement applications. Fluid flow dynamic operations can also be attained through its use. It is equipped with a doubling acoustic ...

High sensitivity dynamic pressure transducers are suited for applications in high intensity acoustic, turbulence, and cavitation measurements. It can be superimposed upon high static pressure fluid media. Axial pressure applied via a ...

The EI Novatec manufacturing consists of a broad variety of modular fitments. Purification and draining systems: 1.Ultrasonic purification and wash off, either based on clients needs or a modular method. 2. Standard base treatment ...

Tactical style adjustable head band for comfort and stability with or without helmet Picks up vibrations and transmits audio signals through the jawbone Comfortable multi-position Skull Microphone and speaker for privacy and optimum ...

Introduced in 1986, the EK is the lowest noise Knowles microphone. Its high electroacoustic sensitivity and low noise make this microphone an excellent choice for applications where space is not an issue. The EK can also be used in directional ...

EL unidirectional microphones provide a unique combination of size, performance and value. These popular microphones are available in many model varieties without the expense or lead time of a custom order. Available in omnidirectional ...

The EM is the most popular omni-directional microphone offered. The superior performance of the low noise EM makes it the choice of hearing instrument manufacturers for all hearing instrument sizes. The EM can also be used in directional ...

The uni-directional TD series microphone provides directional performance in a thin space saving design. The module uses two sound ports and a single diaphragm to produce a supercardiod polar pattern. Various time delays are available ...

The UM 900 is the first switchable pattern, valve condenser microphone which can be connected to industry standard 48 volt phantom powering using a normal 3-pin XLR microphone cable. This is made possible by an advanced circuit design ...

The M 960 studio condenser microphone combines well-proven large diaphragm capsule technology with the latest in semiconductor circuit topology. It is specifically designed to meet the needs of professional and semi-professional users ...