Vibration meters

To meet the demands of rapid change in the factory automation industry, A&D offers a powerful field tool with a new high level of performance. The AD-3552 was created with a comparator function for machinery vibration & noise ...

The FAG Detector II is an easy-to-use and handy vibration measuring device. It has a pre-installed standard configurations in accordance with the DIN ISO 10816 standard, and a plug-and-play solution that gives authoritative, early information ...

This type of oil sensor can be utilized to identify corrosion at a very early stage in a laboriously loaded industrial gearboxes through the oil particles. The waste particles which can signify error can be detected in the oil for a few ...

This is an advanced diagnostics and testing system, designed for permanent-magnet assemblies and motors. The parameter identification and vibro-acoustic diagnosis are the most important features, but the fact that the item can be combined ...

The Type 4447 represents a portable human vibration analyzer with a user-friendly interface and Vibration Explorer PC software. It is used in a variety of health and safety at work and risk assessment applications as it measures exposure ...

This device is capable of measurin vibration based applications with support of various accelerometers. This calibration is based on the position, level and environment in which the calibration is to be performed. Its uses comprise ...

The Engine Vibration Test Kit Type 3656-A serves as a dedicated tool for field inspection of all Turbomeca helicopter engine families. The kit enables vibration test measurements as per respective engine maintenance manual. The kit features ...

MachineryMate's simple, easy- to-use meters record, analyze and display vibration signals for quick and reliable machinery health monitoring. Machinery health in seconds The IP67 rugged meters are designed with high performance ...

The ONEPROD MV1 is a single-channel protection system manufactured by ACOEM. This device guarantees that a rotating equipment is safeguarded through the use of accelerometers. It conditions the accelerometer's signal, measuring and transmitting ...

The ONEPROD MVX is a rotary machine vibration monitoring device, manufactured by ACOEM. This product is used for simultaneous multi-channel monitoring of rotating machinery, which allows the early detection of faults. It is suitable for ...

ONEPROD EAGLE is a condition monitoring system for rotating machines using wireless sensors. To enable industrials enhance the reliability of their machines and avoid unwanted deployment issues, ONEPROD added new features to EAGLE. ...

ONEPROD FALCON is a portable data collector and vibration analyzer for rotating machines. Getting access to critical speeds (or resonances) during run-up and coast-down phases of production tools may help identifying potential failures ...

The Examiner 1000 Series is manufactured by Monarch Instrument, and is a vibration meter equipped with an electronic stethoscope. It has an operating temperature that ranges from -10 up to 50 ?C, dimensions of 152 x 83 x 32 mm and weight ...

High-Precision Vibration Meter VM-700 Application Vibration Meter is used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. Specifically designed for present measuring various mechanical ...

A4900 Vibrio M Ex key features: - All basic vibrodiagnostics measurements: Overall values, Time signal, Frequency bands, FFT Spectrum, Route measurement - 4 MB memory for data storage - detects unbalance, loosenes, misalignment ...

We have an App for your predictive maintenance program. Newest Adash VA3 Pro vibration analyzer makes your predictive maintenance easier. The VA3 Pro is a light weight one handed operation device suitable for non-experienced persons ...

The A4900 Vibrio M - Data collectors from Adash provide operators with the capability to deal with vibro-diagnostic measurements like bearing status and mechanical defect detection, as well as lubrication assessment procedures. These ...

The A4910?Lubri, manufactured by Adash, is made to monitor and control the lubrication processes and to measure the rolling bearing condition. The unit guarantees that the bearings are not under lubricated or over lubricated. It also ...

The VS1 is a compact, rechargeable, handheld Vibration Meter designed to conform to ISO10816-3 and operate with a constant current IEPE accelerometer providing accurate vibration measurement. Features - Storage of up to 100 time-stamped ...

The Vibration/Temperature Meter Series RH711 is manufactured by Anhui Rongzhi Rixin Information Technology Co. Ltd. 1. It has combined 30:1 infrared temperature detector, vibration measurement and manual input operation. 2. It has ...

Features: 1. The RH802, manufactured by ROZH, is a portable vibration spectrum analyzer that offers long time domain waveform, cross-phase measurement, coast-up/down testing characteristics analysis and on site dynamic balance measurement. 2. ...

Ultrasonic vibration measurement system OPVIBR is vibrometer used to study vibrations occurring in many areas of life - in the diagnosis of drives of machinery or measurements of vibration impacting on humans and the vibration, the ...

The KOHTECT Model 795M is an economically-friendly portable single-channel multi-functional data collector and 1600 lines FFT spectrum analyzer. Furthermore, this device features a flexible design for overall value measurement, bearing ...