Samplers

Disposable Powder Thief Single Use Powder Spatula with a click-on Cover The PowderSafe comprises of our best selling Powder Spatu- la with the added benefi t of a transparent click-on container. The see-through container has click-tabs ...

Disposable Slot Sampler Cross Sectional Multilevel Sampler The disposable Slot Sampler is ideal for taking a multilevel, cross sectional sample from powders and granules. The disposable Slot Sampler takes a single composite sample ...

These are high-quality beam samplers that are well designed to effectively meet objectives. They are used to sample or split off beams of light by Frensel reflection. This is applied in areas where minimal disturbances of the transmitted ...

When it comes to quality control for liquid drug manufacturers, it?s important to meet regulations while minimizing waste. The APSS-2000 Pharmaceutical System sizes and counts suspended particulate matter in a wide range of liquids to ...

Highly reliable with minimal effort The SC1 sample delivery and cleaning unit can automate the determination of the density and/or refractive index and additional parameters (color, pH and/or conductivity) of individual samples. With ...

The ESS is designed to sample aerosol particles from hot exhaust gas, e.g. from engine exhaust or stacks. The sampling probe features an integrated two-stage dilution system. The dilution air of the first dilution stage is preheated, ...

Highly reliable with minimal effort The SC1 automation unit for individual samples is available as heated version suitable for performing density measurements on samples which are solid at ambient temperature, such as paraffins, vaseline, ...

Thermo Scientific* Masterflex E/S Composite Environmental Sampler floats in water for up to 30 minutes when case is closed and latched. Programmable composite sample can be set-up and left outdoors in the field for water or ground water ...

The 6712 Portable Sampler features a vacuum-formed ABS plastic shell to withstand exposure and abuse. Its tapered design and trim 20-inch (50.8 cm) diameter result in easy manhole installation and removal. Large, comfortable handles ...

5E-CYP Cross-Belt Sampler is used for extracting samples from the moving streams on the middle position of the belt conveyor.

Ultra-thin Extremely lightweight Uncoated for beam sampling Minimizes disperson and eliminates ghosting Pellicle beam samplers are ultra-lightweight components that virtually eliminate multiple reflections commonly associated with thicker ...

State-of-the-art handling Time- or event-dependent Vacuum-System Low weight Flexible programming The series PB-M: The mobile sampling in safe hands. The lightweight design features easy operation. Details on technical ...

The simplest stationary waste water sampler, extremely compact, wall mountable.

The 6712C compact model gives you the world's most versatile sampler controller in a smaller-diameter package that fits in 18" and offset manholes. Large, comfortable handles make transporting safe and convenient - even when wearing gloves. ...

5E-CYH Railway Wagon Sampler is used for random sampling of bulk materials in the carriage of train or truck. It consists of sampling system, electrical control system, automatic ultrasonic positioning system and coal surface detecting device.

Azo sampling unit type PRA is useful for filling of outdoor and indoor silos. During the process of filling of the silo, there exists an overpressure which is pressing a defined quantity into the receiver while the air is being discharged ...

Compact Time, amount, event and flow proportional and combined sampling Precise non-contacting water measurement (optional) Already starting with 5 ml dosing volume Portable sampler PB 25 S with peristaltic-pump ...

A complete range of stationary samplers (refrigerated, self-emptying,...)

The Autosampler 3950 can inject from up to 768 positions when equipped with microtiter plates (either high or low formats) or from up to 96 standard 2 ml sample vials. Sample carryover is significantly minimized thanks to a highly-effective ...

5E-CYQ Road Wagon Sampler is used for random sampling of bulk materials in the carriage of train or truck. It consists of sampling system, electrical control system, automatic ultrasonic positioning system and coal surface detecting device.

Customers can now choose from a range of products to create the system most suited to their drilling conditions and environmental requirements. Sandviks sampling equipment are semi-automatic components which collect highly representative ...

Essa Vezin sampler is a fully enclosed unit containing a rotating sample cutter that passes at constant speed through the falling stream of slurry or free flowing solids entering it. Correct cutter geometry design ensures radial cutter ...

The 850-DS Dissolution Sampling Station has shown that it has the best capabilities to centralize laboratory workflow including collection, filtration and sample transfer. It manages automated sample archiving and unattended dissolution ...

Endecotts supplies a wide variety of sample collection probes for all types of sample collection: SAMPLE SCOOPS Heavy duty sample scoops produced in highest quality 316 stainless steel. Crevice free to reduce contamination and easy to ...

The Water Sampler Series FlowSampler is manufactured by LAR Process Analysers AG. The product is a sampling unit from LAR, eliminating the need for filtration, due is siphoned-off function from sample stream towards the major flow direction ...

The Co-Sense series features automatic sample processing systems intended to improve the efficiency of LC-NMR and LC-MS operations by automating complicated sample processing steps. This eliminates the need for tedious, time-consuming, ...

EOLO 3001 is a compact and user-friendly air sampling unit, with no maintenance required, mounted on a metal fixed or mobile trolley. The volumetric air sampler with flow rate gauge EOLO 3001 includes an air cooled vacuum pump with graphite ...

The 6850 Automatic Liquid Sampler (ALS) by Agilent is specifically designed for use with the 6850 Gas Chromatograph (GC). The sampler consists of an injector module with a high sample vial capacity turret. It was designed to be the ...

Applications Sampling of powdery and pelletized products from the product stream in gravity pipes or hoppers at normal atmospheric conditions, excess pressure or vacuum (maximum 1 bar). Design characteristics ? Compact welded ...

MM500 Moisture analyzers are built to measure moisture in corrosive gases. Equipped with an integrated microprocessor control and high quality electrolytic moisture sensor,they provide accurate and reliable analysis . It has measurement ...

The PM162M is an automatic sequential particle sampler from Environment that is designed to automatically sample particulate on a filter using TSP, PM2.5, or PM1 inlets. It has a 5U rack for installation in a rack cabinet and a large ...

Cleanroom Air / Ambient Air Sampling System: The unique solid-state sampling system and off-line analytical service from SAES Pure Gas have been developed to provide end-users of leading edge lithography and inspection/metrology equipment ...

Application The automatic sampler Granucheck is suitable for almost all free-flowing bulk materials. The sample is fed from the stationary or moving bulk material column into the connected piping or container by gravity via the pneumatically ...

No condenser is required in the Permeation based drying system thus highly soluble gases like SO2, NO2, and HCI can avoid being lost. It is possible for direct span gas injection to the probe to be made. For reduced maintenance count ...

Succeeding the Sievers-900 Autosampler is the GE Autosampler, with its innovative new design that allows for a high number of laboratory applications. This new GE autosampler integrates with technologies such as Sievers 900 laboratory, ...

Sampling a representative volume of liquid (lube oil, fuel oil, solvent...) is the first essential step in analysing fluids in service and monitoring the performance of machinery over time. The GESERCO sampling Mini-Kits provide a cost ...

The AMESA system is intended for the long term sampling of dioxins, furans and other Persistant Organic Pollutants. The Long Term Dioxin Sampler AMESA could be utilized, for instance, in reject incinerators, unsafe material incinerators, ...

The AI/AS 1310 Series autosampler is ideal for gas chromatography liquid sampling with a range of 8-position system defined by to a 105 sample capacity autosampler . It is designed to comply with the QA/QC and high-throughput surroundings ...

The CEGRIT Automatic Flyash Sampler is a device used for continuous sampling of a gas borne dust. It is applicable to apply in all combustion or other processes where airborne particle emission occur and in smoke and particle emissions ...

TThe MICA 2M, manufactured by Environemwnt S.A is a sample handling system utilized for pumping and conditioning the exhaust gas from the engine to the testing cabinet and analysers. Furthermore it has a sampling trolley along with a ...

The Thermo Scientific* TriPlus RSH Autosampler goes beyond sample injections to more complex sample handling cycles. It improves accuracy and repeatability and allows for a more flexible and productive GC and GC-MS sampling through controlling ...

GEA Nu-Con manufactures a range of sampling systems to suit sanitary applications

The Cement Cube Mold is used to form 2" (50.8 mm) cube samples for compressive strength testing of Portland cement, mortars, lime, gypsum and capping compounds. The main feature in the design is the wide flange construction of the top ...

The TGD 152 is a high volume sampler developed by the French Atomic Energy Commission. The device is used for particulate sampling for radionuclide monitoring. It is also capable of particulate sampling for ambient air quality monitoring. ...

The lightweight Single Point Sampler (SPS) is specially developed to provide the CM monitor users with superior particle counting flexibility. The SPS design incorporates an easy to use, fingertip operated flow control valve which enables ...

The X-SIZE? Automatic Sampler is made to take any sample size automatically in times of blending or mixing operation. It takes samples at any point in a process system to verify dry bulk components. The sampler is programmable to ...

Automatic handling of solid and liquid samples with a final boiling point > 420 ?C can be executed for various applications by the NEWTON auto sampler. It is a stackable, gravity driven, auto sampler for accurate and fast introduction ...

The PRL Primary Sampler is an instrument designed for samples in flight particulate material. Its sample cutter rotates at a constant speed through the falling stream of material. This occurs at predetermined intervals or at a signal ...

Compact Gas sampling system with the proven GMA technology A gas sampling system is required in all places where the gas atmos- pheres cannot be monitored with conventional transmitters and sen- sors. In order to reliably measure gases ...

The Cross Belt Sampler is able to get a typical sample of granular material straight from any type of moving trough belt conveyor. The unit uses a sweeping movement in one direction to sweep material off the belt and into a fixed collection ...

The PRL series is manufactured by Eriez Magnetics Europe Limited. It is a rotating cup bulk solid sampler/rotary sector cutter from the line of PRL primary samplers.

TOC users from around the globe requested simplicity, performance, and durability. The Teledyne Tekmar LSS Boat Module is an ideal add-on to the Lotix Total Organic Carbon (TOC) analyzer. It uses high-temperature combustion to accurately ...

The PCB Cross Belt Sampler is manufactured by Eriez?, and is a unit that acquires typical granular material sample directly through a moving trough belt type conveyor. It has a motion that is in one direction in which it cleanly sweeps ...

The Atomx Automated VOC Sample Preparation system combines an Autosampler and Purge and Trap into a single instrument for the analysis of VOCs in soils and waters. This is the first of its kind and only system that employs a unique methanol ...

The LPG Station is used when analyzing liquefied petroleum (LP) gases with Model 2010L, 2020L, and 9600L analyzers. Designed to ensure a low-pressure, gas phase sample to the analyzer?s injection system. The LPG Sampling Station provides ...

A wide range of scaled production units for laboratory testing of dry and wet material samples. Laboratory Equipment These units are used extensively in test laboratories and pilot plants in universities or research establishments, commercial ...

Multipoint Sampler INNOVA 1409 Full remote-control from a PC via the gas monitor over the USB interface 6 to 24 sample input channels depending on the configuration Integrates seamlessly with the Innova PAS monitors LED indicators ...

The KLL-S model is manufactured by SEBA, and is a portable electric contact meter that is ideal for use in a wide variety of applications such as gauging of water level and total depth of groundwater. The unit is equipped with an LCD ...

The MPTS is an automatic dispenser for powders. It is equipped with a volumetric feeder that ensures safe sampling of toxic and explosive powders. Possessing zero mechanical components, this automatic dispenser is capable of sampling ...

The Sykam S 5250 Sample Injector System is a very flexible and powerful HPLC autosampler with excellent reproducibility and linearity properties. Variable vial racks and adaptors for microtiter plates as well as a multitude of firmware ...