Other resistance heaters

Maximum temperature: 340 ?C
Power: 65 W - 970 W

Maximum temperature: 175 ?C - 982 ?C

Maxi-Rollmax heaters are manufactured to the same construction design of the other Rollmax models. Its flat 4.5 x 8 mm cross-section can bear very high loads, with specific power of up to 8 W/cm? (20 W/linear cm). It is particularly fit ...

Maximum temperature: 70 ?C
Power: 10 W - 400 W

Flange Heating Element or FHE is utilized for heating water in the industrial sector.. Water has to completely cover all the heating elements. The stationary systems inside buildings have the FHE installed in them. Exceedingly high temperatures ...

Maximum temperature: 982 ?C

Maximum temperature: 300 ?C

Heating using a glass-silk insulated heat conductor featuring protective braiding made of pure nickel wire. Available with or without protective conductor. Description of depicted jacket: Outer cover made of aluminium-coated glass fabric; ...

Power: 5000 W

Maximum temperature: 700 ?C

The immersion heater, which combines several tubular elements and a monting attachment, is the best adapted solution for heating fluids. (Water, oil, fuel, solvents, flowing gases, baths for surface treatment, etc.). The standard models, ...

The immersion heater with flange is manufactured by Chromalox. It has length up to 240" and power ratings up to 2000 kW. It also features ideal for producing steam and warming gasses and fluids in weight vessels and tanks, flanged ...

Power: 100 W

The Tube Reactor Heater is automatically controlled by the Africa software. The Tube Reactor Heater consists of a controllable hotplate and a ?converter box?. The ?converter box? allows the hotplate to be controlled by the AFRICA software ...

Maximum temperature: 392 ?F

Maximum temperature: 56 ?C - 232 ?C

304 SS Sheath, 304 SS Fitting Without Thermostat, NEMA 1 Terminal Box

A tubular heater consists of a spiral-wound resistive wire perfectly centered in a tubular metal sheath filled with a powdery insulator (electro-fused magnesia). Laminating the resistance allows compacting the magnesia, necessary to ...

Maximum temperature: 200, 180 ?C

Heating elements of stainless steel (AISI 304) for heating in containers or vessels where the liquid is not water. Is often applied within food industry, where the requirements to hygiene are high.

Heating using a glass-silk insulated heat conductor featuring protective braiding made of pure nickel wire. Available with or without protective conductor. Description of depicted jacket: Outer cover made of aluminium-coated glass fabric; ...

Immersion heater with thermostat and Incoloy sheath 2¼ BSP brass fitting Incoloy pocket with 5 to 80°C or 30 to 90°C thermostat included Optional 45 to 120°C thermostats available IP55 aluminium terminal cover Options ...

Maximum temperature: 200, 750 ?C

Power: 8 W - 800 W

Maximum temperature: 700 ?C

Maximum temperature: -40 ?C - 70 ?C
Power: 100 W - 180 W

The FHK series is manufactured by Herbst Beheizungs-Technik, and is an electronic flange heater that has been specifically developed to be used in heating up liquids, and gases. Thee design of the series consists of highly compacted tubular ...

For environments with high temperature fluctuations or high humidity, we recommend a heating resistor be fitted to prevent the build up of condensation within the enclosure. The heating resistor is designed to ensure a minimum operating ...

Power: 30 W - 100 W

The screw plug IMMERSION HEATERs is stainless steel, with thermostat and limiter. It has a screw plug immersion heater consisting of MS connector G 1 1/2 with 3 U-shaped hard-soldered immersion heater tubes Ø 8,5 mm. Its material ...

Over-the-side electric immersion heaters are widely used in the metal finishing industry in plating tanks due to their convenience at lesser cost when compared to a Bottom or L-shaped Electric Immersion Heater. Another advantage is the ...

Maximum temperature: 300 ?C

Maximum temperature: 80 ?C
Power: 700 W

Maximum temperature: -40 ?C - 70 ?C
Power: 1200 W

Flat tube sheathed tubular heating elements are produced by Zoppas industries. The elements can be manufactured using various profiles and sheath materials, such as carbon steel, stainless steel, and Monel 400. Flat tube elements are ...

Maximum temperature: 350 ?C

Maximum temperature: -45 ?C - 70 ?C
Power: 25 W

Maximum temperature: 750 ?C
Power: 550 W - 2800 W

Maximum temperature: 200 ?C

Maximum temperature: 0 ?C - 1350 ?C
Power: 0 W - 40000 W

The low wall thickness of the clamp of only 1.5 mm, the fixation by easy sliding on the nozzle as well as the front installation and removal are essential arguments which save money by this simplified handling. Furthermore the hotspring? ...

Maximum temperature: max 950.0 ?C
Power: 1.7 kW - 3.4 kW

Maximum temperature: -45 ?C - 70 ?C
Power: 50 W

Maximum temperature: 650 ?C
Power: 200 W - 550 W

Maximum temperature: -45 ?C - 70 ?C
Power: 100 W

Maximum temperature: max 1000.0 ?C
Power: 1.4 kW - 2.7 kW

Maximum temperature: 700 ?C
Power: 650 W - 1900 W

Maximum temperature: -45 ?C - 70 ?C
Power: 150 W

Maximum temperature: 1850 ?C

Our smart solution for effective heating is the GC-slide, a special compact heating element for hot runner systems. Unlike conventional clamping mechanisms designed to ensure that coil heaters sit firmly on hot runner nozzles, the GC-slide ...

Definition: Heating plate for all applications. Construction: Heating plate in rectified duraluminium, covered with PTFE Polytetrafluoroethylene, Teflon). Exterior housing in stainless steel. Insulation: Stainless steel thermal screen. Heating: ...

HEATING TABLE In order to heat up thermoplastic material such as mineral plastic, acrylic, etc. to the required working temperatures (maximum 200?C), Joos offers Heating Tables that are standard or customized manufactured. The combination ...

Maximum temperature: 0 ?C - 1200 ?C
Power: 0 W - 7480 W

Power: 80 W - 840 W

Maximum temperature: 1100, 1150 ?C

Maximum temperature: 50 ?C - 1425 ?C

High robustness, armored and tight IP55 compliant Metal steel, cover in Alpax Horizontal or vertical use Tension until 1600 VDC Application examples : Every fields using the stop or partial braking of a motor. Machine with ...

Smaller diameter sanitary versions of Komax highly successful Direct Steam Heaters have improved the heating of liquids and the cooking of heavy viscous slurries. The Komax Sanitary Heater demonstrates superior performance in starch cooking ...

Maximum temperature: 1850 ?C