Burner accessories

Flange immersion heaters are constructed of hairpin bent tubular heater elements brazed or welded into NH standard flanges or plate flanges of various shapes and sizes. NH flange heaters are typically used for large volume, high power ...

Applications Most suitable for heating barrels requiring higher temperatures than considered suitable for a mica type heater. The coil heater is rugged and can stand exposure to temperatures as high as 1000ºF. Standard Features The ...

The self-checking RUBY PACKSCAN flame detectors are mainly designed for monitoring gas burners. They transmit a binary safety signal on the presence or absence of a flame. The response time to a flame shutdown is less than 1 second, ...

High energy system designed for the ignition of gases as well as heavier oils in damp and otherwise adverse conditions. There are a range of units which start from 1.3 to 16 joules to provide a high energy discharge to any high energy ...

CSN? FLOW HEATERS FOR THERMAL PROCESS APPLICATIONS Typical Fields of Application are in the chemical, petrochemical, railroad and shipbuilding industries, in the machine and industrial equipment construction. CSN? circulation heaters ...

Standard Indeck systems are based on our nearly half century of packaged boiler field experience and are available for immediate delivery. Custom systems are rapidly developed and completed through our in-house engineering, UL listed ...

The Cata-Dyne? Line Heater uses radiant heat transfer to increase the temperature of compressed natural gas to avoid the formation of hydrates and freezing of equipment during pressure drop at locations such as distribution nodes and ...

Operating pressure: 150 mbar - 1 mbar
DN: 25 mm - 100 mm

Monitored Burn-in System allows simple switching from dynamic burn-in to monitored burn-in by modifying the software. (optional) Improving the pattern generator and driver allows burn-in of a variety of devices. Synchronous DRAM, Burst ...

The Ruffneck™ RXDF Explosion-Proof Duct Heater is designed for heating air or gases in hazardous environments where potentially explosive substances are present, such as oil refineries, coal mines, petrochemical plants and sewage ...

Flame detector for flame signalling or for multi-flame control in conjunction with IFS 110/111IM, for intermittent operation, ionisation or UV control. For earthed or unearthed mains, mains voltage:110/120 V AC or 220/240 V AC.

CSN®-cartridge type heating elements and bath heaters are eminently suitable for direct heating and warming of liquids of all kinds. Corresponding to the nature of the different media protective coverings of steel, various special ...

Cartridge Heaters with metal jacket Cylindrical heating elements with broad application range. They are used as: Radiation heating element Contact heating element Heating element for direct and indirect heating of liquids Soldered ...

Filtervac designs and manufactures low watt density Heater Skids/Systems for elevating and accurately maintaining temperatures of various kinds of oils and fuels. The Filtervac Oil Heater System design utilizes CE/CSA/UL listed heating ...

Description Efficient, compact heating units designed to provide bulk heat flow system processing of fluids or for liquid accumulators. Normal and certified hazardous area constructions. Standard models have AISI 316 tubes and brass or ...

series GD6 DN 500 Coupling with electric gear motor. Design temperature 600? C, operating temperature 450 - 500? C.

The self-checking SAFYR PACKSCAN flame detectors are designed for monitoring solid or liquid fuel burners (oil, pulverised coal, heavy liquid residues). They are adapted for multi-burner installations by facilitating flame discrimination. A ...

This ceramic igniter specifically used for burners which is manufactured by CoorsTek is a hot surface ignition system that has been developed to provide effective, and reliable performance. Its 101 series has a room temperature resistance ...

Power: 25000 BTU/h

The DURAFire? air atomized No. 2 oil igniter features the only protected primary combustion zone design on the market. As a result this igniter is self stabilized, highly reliable and requires virtually no maintenance. Atomization takes ...

Self-regulating grounded heating element 150 o F (66 o C) maximum exposure temperature on heating surface Available in 120 and 240 VAC Frequency range: 50-60Hz Insulation thickness Sides: 2.0" (51mm) ...

The LVDT-HC is a pilot burner ideal to any procedural type of air heating applications such as thermal incinerators, supplementary firing burners, etc. It is suitable to other products like MAXON AIRFLO? "LV", "HC", DELTA-TE? and COMBUSTIFUME? ...

Operating pressure: 8.6 bar
DN: 0.75 in - 6 in

Operating pressure: 8.6 bar
DN: 0.75 in - 6 in

The actuator-mounted butterfly valves have been designed to meet the automatic gas flow regulation requirements of combustion systems with a <0.5 bar pressure. These valves do not have a 100% hermetic closure. The actuator is directly ...

Electro-Mechanical Oil Shut-Off Valves by Maxon is perfect as a general purpose shut off valves. In less than one second, it can cut off oil lines. Made with a variety of materials and combinations, complete with metal-to-metal seating ...

The electrical DBK Pellet Igniter unit heats the air up to the ignition temperature. The pellets or wooden chips ignite reliable within short time. The DBK pellet ignition devices convince with the following features: Heating Power: ...

The Pyronics FLOMIXERS are relative blending gadgets that use the vitality of a stream of air at weights up to a few pounds to entrain a burnable gas, and to convey the mixture at surprisingly high weight to the burners.

These Maxon Electro-Mechanical Oil Shut Off Valves control oil lines in less than a second through its electrically actuated valves. Due to MAXON's durable metal-to-metal seating and a variation of nonobligatory body materials and connections, ...

The actuator-mounted butterfly valves have been designed to meet the automatic gas flow regulation requirements of combustion systems with a <0.5 bar pressure. These valves do not have a 100% hermetic closure. The actuator is directly ...

Product features Inserted heating cartridges with temperature control to heat the cold and viscous oil Temperature pre-selection outside (TA) or under the protection cap (TI) Thermostat to be set to 0? C to 85? C ...

The Hijectors? is a gas air, manufactured SELAS HEAT TECHNOLOGY LLC. This product is ideal to use for burners mixers. It is capable to work with maximum 35psig high pressure gas for entraining all the air required. The air is needed to ...

Flaring systems in a refinery, petrochemical plant or steel plant ensure the safe and efficient disposal of relieved gases. A flare is expected to operate twenty-four hours a day. The flare system must be in service for several years ...

It is used for heating of water, oil, fuel oil. We produce customized heaters. Technical Features Working Temperature: 350°C Min Ø: 8,5mm Watt: Max. 15 W/cm²

5 stones parts for gas lighter Ref : PIERREALLUMEGAZ

Power: 30000 W

John Zink Hamworthy Combustion offers a wide range of custom designed and standard ignition control systems to keep flares operating safely and reliably. Flame front generators ? Reliable, remote ignition of flare pilots is achieved ...

Pulse developers are engaged in developing products concerning every aspect of ignition. The invention of the pencil ignition transformer, is a technological breakthrough for modern ignition concepts. Pulse is one of the leading manufacturers ...

Temperature: -10 ?C - 80 ?C
DN: 0.25 mm - 0.75 mm

John Zink Hamworthy Combustion can provide an Amine Contactor Tower to lower the H2S in recovered Flare Gas. Typical H2S concentration in overhead gas is 50 ppm. John Zink Hamworthy Combustion scope of supply is the Amine Contactor Tower ...

CORA - the constant ratio control system for mixture heating The CORA system is a specially designed supply station to pre-mix gas and combustion air in a constant ratio for firing inside distributor and forehearths. The major advantage ...

Lighter gas safety friction gas torches and autogenous. Ref : ALLUMEGAZ

Use of flange connections eliminating unions in gas and air lines. Easy accessibility of entrainment insert for inspection, cleaning or changing capacity without disconnecting gas or air lines. Universal type gas ad|uster-good for any ...

Hauck's 'Retain-a-Flame' burner nozzles are recommended for firing of gas-air mixtures where a small amount of excess air induced around the nozzle is allowable. These nozzles are ideal for firing either into the open ports of furnaces, ...

Multiflo mixers are adjustable high efficiency proportional mixers. The energy of the air passing through the jet produces a suction (Venturi effect) to entrain a combustible gas and deliver the mixture to the burners. A simple hand adjustment ...

Description Glow igniters made of silicon nitride are normally rectangular in shape. Within our mold diameter of up to 400 mm various dimensions and batch sizes are possible. These igniters have a hot zone range of operation up to ...

Description Efficient, compact heating units designed to provide bulk heat flow system processing of fluids or for liquid accumulators. Normal and certified hazardous area constructions. Applications Vary widely used to heat water, oil, ...

All fuel supply and control stations from GRECO are manufactured according the valid technical standards(e.g. DIN, NFPA or GOST standards) and are designed to perfectly fit to the burner or combustion system. * Natural gas pressure ...

The alumina ceramic heater is manufactured by Innovacera, and is a ceramic heater equipped with an alumina and silicon nitride structures. It uses a high temperature co-ceramics technology used for efficient solution to various heating ...

MASTER GREEN series - suspended heaters Power: 75-134 kW Main features: - Separate oil burner - Electronic flame control with photocell - Fan-Limit thermostat with automatic reset - Limit thermostat with manual reset - ...

B&W MEGTEC provides a series of proven biological treatment systems for VOC abatement and odor control. We have developed a range of bioreactors and bioscrubbers, which offer effective destruction of a wide range of commonly used solvent ...

Operating pressure: 300 psi

The electronic ignition device permit ignition of the halogen metal vapour lamps: HSD 575, RSD 575 manufactured by OSRAM, radium or comparable types, in housings designed for them with the LEJ ballast V 600 PFC. Using the device system ...

The Compact Flame Controller unites flame scanner and flame amplifier module in one housing. Compact flame controllers series 8.xx are mainly used for the monitoring of gas and oil burners. Both relay switching state and flame intensity ...

Electric heat exchangers equipped with control panels dedicated to power supply and process control. Skids may include as necessary control units and safety devices (e.g. valves, sensors, level sensors, etc.). Most significant installations ...

FKK Corporation producing OEM custom order ceramic alumina heater for kerosene and biomass appliances. FKK Corporation is now one of the world?s leading producers of alumina ceramic igniters for compact fan heater as well as biomass (wood ...

The compact flame controller CFC1000 has been developed for applications on large steam and industrial boilers. The goal is safe and reliable monitoring of fuel burning systems, provision of data to optimize the combustion process and ...

FKK Corporation producing OEM custom order ceramic silicon nitride igniters for gas and oil energy-efficient equipments. FKK Corporation is now one of the world?s leading producers of ceramic igniters for compact boilers and tankless ...

Temperature: 38 ?C - 240 ?C
Operating pressure: 0 bar - 413 bar
DN: 0.5 in

The UNIGRESS DDM/XL oil lance series is designed as waste fuel oil lances using compressed air (or steam) for atomisation. The design allows to burn liquid waste fuels with high or low viscosities, with or without solid particles. The ...