Burner accessories

Description: The double electrode is placed in a 80mm long ceramic corpus. No more twisting inside the holder. Thickness of the wire 1,9mm. For use in a TEHA boiler a different mixer unit is necessary. Item number: E10400052-2

Temperature: 300 ?C
Operating pressure: 25 bar
DN: 300 mm - 3000 mm

The L.LAIR manufactured gas pipe train are used to supply and adjust the gas power , gas safety and gas monitoring for all the industrial gas burners using natural gas,Methan gas, L.P.G , Bio gas. Their goal is to reduce and adjust the ...

Low watt density heater elements prevent oil damage (no direct oil contact with element). Programmable temperature control with integral no-flow switch prevents oil damage from stopping oil with heater energized. Standard ...

Temperature: -29 ?C - 121 ?C
Operating pressure: 6000 psi
DN: 0.25, 0.38 in

The flanged immersion heaters are particularly suitable for heating or maintaining temperature of large volumes of fluid such as water, fuel oil, thermal oil, air or gas. Indifferently mounted on tanks, cisterns, boilers, circulating ...

Temperature: -51 ?C - 316 ?C
Operating pressure: 6000, 3000, 5000 psi
DN: 0.25, 0.38, 0.5 in

The heating elements for air/gases, both custom design as the standard, are used in ducts, autoclaves, ovens, etc. The heating elements for air or gas can be manufactured like tubular elements, finned helicoidal and / or rectangular, ...

Operating conditions encountered in the automatic controlling of gas and air flows often require valves with an adjustable flow curve which can be altered at various points of opening to obtain the desired amount of flow. Such flexibility ...

ENERVAC specializes in the design and manufacture of low watt density electric heating for industrial oils. We manufacture our own ASME coded heat exchangers and our own CSA/UL approved heating elements. The ENERVAC Industrial Oil Heater ...

hot water module, fuel-oil heated boiler with heating coil, vertical burner system 230 V/50 Hz turns cold water hp cleaner into hot water hp cleaner just by docking between hp cleaner and spray equipment water temperature max. 130 ...

Low voltage cartridge heaters are unipolar elements in which the heating coil (NiCr 80/20) lies embedded in high compacted MgO co-axial to the sheath. On one side it is connected with the lead, on the other side with the bottom disc.

Temperature: -20 ?C - 400 ?C
Operating pressure: 0 bar - 420 bar
DN: 0.25 in - 0.5 in

Temperature: -29 ?C - 121 ?C
Operating pressure: 6000 psi
DN: 0.25, 0.38 in

The ELE portable system is designed to solve problems of vehicle exhaust gas extraction during engine testing procedures in enclosed places not equipped with fixed wall or ceiling-mounted extraction systems. Once extracted the gases are ...

Operating conditions encountered in the automatic controlling of gas and air flows often require valves with an adjustable flow curve which can be altered at various points of opening to obtain the desired amount of flow. Such flexibility ...

The GR-3A Series of Ignition Controller is manufactured by Shen Zhen Sunsrays Heating Science And Technology, and is mainly used for gas appliances applications. This device can generate with an auto-shut-off when flame is detected failure, ...

Shen Zhen Sunsrays Heating Science And Technology offers ceramic tiles, that are especially designed for radiant burner. These ceramic tiles have dimensions of 132 mm x 92 mm x 12.5 mm. They are made in Taiwan.

The loop heater enables the temperature of the loop of a fluid to be maintained, the temperatures of which may vary up to 250 ?C depending on the thermal fluid used. The use of the compact immersion tube in this application enables a ...

Heat Exchangers are the best solution to heat fluids flowing in forced convection. Electrical Heat Exchangers operate in the same way as fluid/fluid heat exchanger but the hot side consists of armoured electrical heaters in direct contact ...

These heaters have been designed to operate safely in environments with a potentially explosive atmosphere. They comply with the requirements of the European specifications EN 50014 and EN 50018 as well as of the European Directive 94/9/CE ...

Manufactured using stainless steel AISI 316L tubes, this type heater is best suited in the applications presenting corrosion problems or whenever it must be insured that the heating elements can be replaced. Thanks to its peculiar ...