Other refrigeration systems

Technical feature ? 10 "Stand-alone" sizes ? 40 "Slave" combinations with SyScroll Air and SyScroll Air EVO families ? Cooling capacity from 100 to 550 [kW] ? Fans versions: STD (Standard) EC (Brushless Fans) HPF (High Pressure Fans) ? ...

Inlet cooling systems include cooling and humidification using evaporative coolers, cooling and dehumidification using chilled water/glycol based heat exchanger coil systems. Braden designs these cooling systems with careful considerations ...

Standard Features * Fixed flow * 8gpm up to 1000psi * Dual high capacity filters * Super-fast filter change system * 50-gallon reservoir * Single high-pressure outlet * Oil Sight Glass for easy maintenance ...

The Kite Series, manufactured by Frigosystem S.r.l.?, is utilized in a variety of operations such as a cooling unit for blown film extrusion lines that is efficient due to the consumed energy minimized at the same time increasing the ...

The TR400 model is manufactured by Gami, and is a cooling tunnel that is highly intended to achieve an excellent drying of en-robed products, which has a cooling process that is performed by a cooled air loop operated by a thermo-regulator. ...

The ARES-G2 offers the convenience of swap temperature control options, which are automatically detected and configured when attached. The new Air Chiller System, ACS-3 is a unique gas flow cooling system. It is equipped with a three-stage ...

Assembled fan units provided in accordance with the specifications of the equipment. For use in communications equipment, servers, and storage systems.

The high-capacity air or water cooled compact cooling systems from the model row LT in the power range from 0.15 kW up to 6.5 kW not only increases the productivity but also reduces your production costs. Excess heat is discharged from ...

PLA-300 WATERCOOLER ? For use with Watercooled Torches ? EWM00211 SR 18 X 4m TIG Torch & EWB00309 MB 501 4mt MIG Torch ? Input Voltage - 220 volt 50/60HZ ? Output Amperage - 1.1 amps ? Cooling Capacity - 8 l/pm ? Max pressure - 0.3 Mpa ? Flow ...

This device is used for cooling the seals located in the mechanic transmission of the centrifugal pump.

- Hermetic presser or semi hermetic (depending on the model) compression pistons of gas R 507, complete of faucets on aspirant side and press and charging lubricant oil - Pressodeprimostato for control circuit of high and low pressure ...

Cooling unit for bicomponent products, like Thiokol polysulfide With cylinder at -30C for temporary storage of the mixer device to prevent catalysis

A revolution in energy efficiency through innovative hybrid technology. 75% energy saved due to speed-regulated components and heat pipe technology. Unique multi-voltage capability for worldwide use. Intuitive operation via touch display. ...

The forward-looking intensive cooling system for time saving and careful working of your pro- ducts after thermal treatments Your advance in one look: ? reduced cooling times, up to 80%, ogainst customary cooing systems ? Icrger shelf ...

>The features of super cooler. Super win The device for removing oil and water prevents fine oil and water from infiltrating inside the panel. The automatic temperature sensor can save power and extend the life span of fan by stopping ...

CDS air tables cool plastic profiles by means of adjustable air blowers and nozzles. The tables are solidly constructed and can be easily positioned to match the height of the extruder and downstream line. Ideally suited for thin, ...

FRAMEWORK A "BMC-AR" is composed of one or more racks and Rack Cooling Modules (RCM) The assembly is made watertight by adding a rear containment. ADVANTAGES Cooling systems closest to the servers Possibility of providing ...

Cooling power: 550 W

Power 1.0 kW Power supply 1x400Vac Content 3.0 l IP protection rate IP23S Dimensions 660x240x220 mm Weight 12.0 kg

The CyberRow from Eaton is a cooling system has been developed specifically to be used in open and contained aisle configurations as well as small to enterprise size data centers. Its compact, and minimal footprint design has a maximum ...

Cooling power: 1500 W - 2500 W

Streamline cutting processes, support employee safety and save time and resources Struers? new Coolimat-200 high capacity recirculation cooling unit is flexible, efficient and easy to use. Robust and reliable ? and with built-in safety ...

FEATURES: ? COOLKIT-B, producing "Semi-Dry Fog?" with a mean droplet diameter of 10?30?m, cools the area and provides more comfortable environment in summer. ? Made by authentic nozzle manufacturer = High Quality & High Reliability. ? ...

Name: Tandem Central Compressor Unit Evaporating Temp.: -20? - -45? Nominal Output: 52.5?7.5+15.0?3?KW Power Source: 380V 3Phase 50Hz Refrigerant: R404A

Delta TEC 200W is a Peltier cooling system designed to remove excess heat from batteries enclosures and ensure longer batteries service life in better temperature conditions. It is highly recommended to used in battery compartment cooling ...

FUNCTION: Rear door of rack integrating an air/water exchanger, cooling power of 10 to 20 kW depending on the system of water available. The air pressure drops are low and do not disrupt the servers. PRINCIPLE: The heated air coming ...

Besides fans and regulation components, the indoor CoolTeg DX units include the highly effective evaporator for refrigerant R410A. Each indoor unit must be connected with refrigerant pipes to the Mitsubishi outdoor compressor unit. The ...

Since water resources being not sufficiently available, more and more frequently it becomes indispensable to cool the oil with air. In some cases it is not possible to connect the air-oil heat exchanger on the oils return line due to ...

Semi Dry fog? Gas turbine inlet cooling system Gas turbine uses ambient air as the working fluid, so its performance depends on ambient conditions. Cooling inlet air will increase its density, increasing the air mass flow and thus ...

FUNCTION: Rack equipped with a door cooled by water, allowing you to host up to 45 kW of equipment without heating the air on output, and without disrupting the ventilation of the servers. PRINCIPLE: The heated air coming from ...

The CJC? Air Cooler Cleaner is designed as an auxiliary module to be used with 2-stroke turbocharged diesel engines. After hours of operation, the air cooler gets fouled and the result is lost engine performance. The CJC? Air Cooler ...

LYOHM System is a simple but innovative outdoor cooling system featuring IKEUCHI's state-of-the-art manufacturing technologies of spray nozzles producing Semi Dry Fog?. It is composed of LYOHM spray nozzles mounted on headers, a controller, ...

The P300 series is manufactured by Termotek Ag, and is 19" slide-in rack chiller, which has a cooling power capacity that ranges from 200 W up to 3 kW.The unit measures 412 HU in eight, and has a rated flow rate capacity of lesser than ...

Intartop series are monoblock refrigeration units for a roof-top installation in a cold-room. Every unit has been previously tested to ensure an optimal and uninterrupted operation under extreme conditions. Series MCR-N / BCR-N: Roof-top ...

These connection-ready cooling units are for use in closed circuits in which it is necessary to re-cool the coolant to a level equal to or lower than the ambient temperature. The space-saving device has a compact construction. Being ...

Condensing units are designed for applications in medium and low temperature refrigeration and the range of power available varies according to the type of customer needs. In the units are installed condensers with quality certification ...

This is an Air knife cooling system manufactured by Exair Corporation which comes with a compact design that can generate great volumes of airflow. For this specific unit, it can be controlled using a pressure regulator that enables it ...

What is the COOLKIT-D2? ? Directly connected tap water. ? Spray kit intergated with a pump, built-in motor and filter. ? D.I.Y., Easy operation. Features ? Spray unit producing non-wetting "Semi-Dry Fog" with a mean droplet diameter ...

Particularly suitable for installation in small cold rooms, Royal Frigo monoblocks are designed for outdoor environment and in the superimposed version for wall-mounted installation or with mounted buffer, with capillary expansion, defrost ...

Frigid-X? Single Point Tool Cooling System for dry machining applications - replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost. It is efficient and can improve dry ...

from 0,6 to 3 kW: Ultra compact series for recessed installation, with coachwork for external installation.

A modular concept for application versatility -Totally reversible from -20?C to +10?C for operating flexibility Unrivalled temperature recovery for urban distribution -Choice of evaporator for maximum loading space and payload capacity Rapid ...

The tool cooler is available in several capacities - 15, 25, 30, and 40 scfm in addition, there are two versions-a single point outlet and dual point outlet system. The Single Point versions are used where a concentrated airflow is needed ...

Power: 50 W - 400 W
Maximum temperature: -45 ?C - 150 ?C

The patented design of Macro Engineering's D10 Series Dual Lip Air Rings is the most advanced, efficient and versatile in its class. The enhanced cooling technology of the D10 Series ensures the best output rates attainable on new or ...

The TBi beCool 2.2 cooling unit is the perfect choice for use with all watercooled welding torches. The large heat exchanger allows for efficient cooling by the ambient air. The water level in the tank is directly visible for daily inspection. ...

Heavy coolants can be costly and messy. Thus, they require careful maintenance. The need for lubrication, dry machining is not always possible. This is the reason Frigid-X? Sub-Zero Vortex? Tool Cooling Mist System is the best in case ...

Power: 300 W
Maximum temperature: -50 ?C - 100 ?C

The RC1 has an insulated stainless steel flexible line approximately 1 metre long with a stainless steel coil supported by an adjustable mounting bracket. This cooler can cool 8 litres of water in an insulated tank from 30C to 5C in approximately ...

Cooling unit PS1223CO is microcontroller operated second generation of water-to-water cooling units designed for flashlamp-pumped lasers. Features Water-to-water cooling unit in 19? rack mount stainless steel case Cooling capacity ...

This unit is particularly well suited to cool MIG/MAG and TIG torches; the unit is equipped with a handle for easy transport, a cable for rapid connection to the 220V mains supply and can be mounted on any generator. On request, this ...

The SILENT EVO2 are used in circuits wherein an exchanger cannot be installed on a hydraulic circuit which can cause a return in the line due to hammering and high differential flows in the circuit. The simplicity of this installation ...

B160R92S16: Operating voltage: 220 ? 240 V/50 Hz B160R92S15: Operating voltage: 100 ? 127 V/50-60 Hz and 220 V/60 Hz This compact service unit has been specially designed for very small gas quantities and is perfectly suited for ...

A complete centralised cooling plant, including the required peripherals, can be set up in the absolute shortest possible time at the subsequent place of installation and is immediately ready for use by means of prefabrication and installation ...

This Heat exchanger TFSA from Universal Hydraulic embodies several good technical capabilities which make it an extremely useful product. It has a partial-flow-cooling unit with a test pressure 40 bar. It has a filter mat, thermo-bypass ...

The air-cooled mono bloc refrigeration centres series MKNFTE, with major power capacities of between 440kw and 2000kw are designed for installation in open environments to solve every positional problem and are designed with unchangeable ...