Other resistance heaters

Maximum temperature: 1300 ?C

Maximum temperature: 300 ?C
Power: 500 W - 2000 W

Electrical flange heaters are designed for efficiently heating liquid or gaseous fluids which are flowing or stagnant. The design is based on the general conditions such as the type and properties of the respective fluid, pressure and ...

Maximum temperature: 250 ?C
Power: 3000 W

Good to know Our compact Innopas WICG heater offers you a reliable means of avoiding condensation on the cans, glass, and PET containers of cold-filled beverages to avoid problems with subsequent labeling or film wrapping. The Innopas ...

Maximum temperature: 1350 ?C

Power: 8 W - 13 W

Vulcanic's screw plug immersion heaters, which comes without an electrical box, are designed with U-shaped heating elements. These components are soldered on a screw plug and then designed with a waterproof sealing. The threaded terminals ...

Maximum temperature: 250, 150 ?C

Maximum temperature: 80 ?C
Power: 50 W - 150 W

Power: 100 W - 700 W

Maximum temperature: 100 ?C

Power: 200 W - 3000 W

Maximum temperature: 900 ?C

Maximum temperature: -45 ?C - 50 ?C
Power: 25 kW - 150 kW

- Bain-marie alternative for maintaining the temperature of trays and casserole dishes made of metal, glass and porcelain. - Hot Plate conveniently designed for buffet and table service. - Sturdy polished stainless steel frame. - Convenient ...

Maximum temperature: 600 ?C

The flange-mounted electric heaters have been conceived to satisfy the most different needs in the heating of liquid substances, both in the industrial and in the civil applications. They are designed to be inserted into tubes, basins ...

Maximum temperature: 900 ?C

A complete range of heaters to eliminate condensation inside the electrical enclosure. Can be mounted on DIN rails and connected to the terminal block. IP 54 to IP 20 protection rating according to the models. VDE, UL and CSA certification.

Maximum temperature: 600 ?C

Key Features Precision PID controller Excellent thermal properties This digital hotplate features a precision PID controller providing degree-by-degree temperature setting and control, with refined hotplate sensitivity. Temperature ...

Manufactured using stainless steel AISI 316L tubes, this type heater is best suited in the applications presenting corrosion problems or whenever it must be insured that the heating elements can be replaced. Thanks to its peculiar ...

THERMAL RECLAMATION Omega has a full range of gas-fired thermal reclamation plants ranging from 250kg/hour up to 12 tonnes per hour for the complete reclamation of all organic binder sand systems as well as recovering silica sand from ...

Production of hot liquids in baths or tanks, heating of aqueous or non-aqueous solutions, for washing, degreasing, pickling, firing, dyeing. DIRECT HEATING Positioning of heating equipment in the bath (gas immersion heater). DECENTRALISED ...

Power: 50 W - 250 W

Maximum temperature: 1800 ?C

Enerquip ? Bayonet heaters, industrial heating solutions The engineers at Enerquip know it?s crucial to properly heat liquids. Using the wrong method could result in ruined product and wasted energy, time and money. This is why we work ...

Power: 50, 80 W

Ceramic heated knives made of silicon nitrade can be produced in various sizes and shapes. It can be adjusted to fit the dimensions of the material or surface to be cut. The ring knives are typically available in rectangular shape, with ...

Maximum temperature: 120 ?C
Power: 50 W - 600 W

This silicone nitride ceramic can have an outer diameter of 300mm and a typical height of 5mm within which any rectangular or customized shape or opening is possible. It has low mass allowing fast heating rates, outstanding and precise ...

Maximum temperature: 1000, 500 ?C

Power: 3000 W - 27000 W

Description Ceramic hot plates made of silicon nitride can be produced with an outer diameter of 400 mm. Within this diameter any rectangular shapes, customized shapes and openings are possible. A typical height of the plates is 5 ...

Maximum temperature: 180 ?C
Power: 120 W - 1000 W

Power: 330 W - 950 W

Power: 500 W - 18000 W

Power: 250 W - 650 W

The immersion heaters are applicable heating in direct contact with the fluid such as water, oil, viscous materials, acidic and basic solutions, etc. They are also applicable to any kind of fluid, from water to corrosive solutions, oils, ...

Power: 10 W - 45 W

Druseidt Elektrotechnik manufactures a broad spectrum of products, which includes equipment that are used for tank heating and control. The equipment is available in a number of variants. These variants include immersion heaters, angled ...

The Immersion Heaters from Hotwatt are provided with different junction boxes for additional terminal or lead protection. These tools may be supplied for three-phase or three-heat operation. These devices are made from flexible stranded ...

Power: 30 W - 50 W

The crankcase heaters are designed to beat the industrial problem of migration and condensation of substances like refrigerants in crankcases inside compressors that are made use in systems used for heat pumping and air conditioning. ...

Maximum temperature: 300 ?C
Power: 30 W - 960 W

Description and application Specifically studied to be integrated in production process (dimensions and ergonomic on request) Volume 25 L Product heater mounted on a cover insuring the tubular coil support Heat-carrier fluid supply Complete ...

The Heating Element is manufactured with a broad variety of heating elements used for a broader range of products.

Industrial immersion heaters are a fast and efficient way of heating up various liquid solutions in processing equipment, as well as in large tanks through the use of tank immersion heaters. Heating up liquids using direct heat transfer ...

Power: 650 kW

Power: 1500 W - 9000 W

Flanged heaters are commonly used in many chemical, petroleum and water based applications. Consisting normally of an ANSI rated flange with several hairpin elements or bugle tubular elements extending from the face of the flange, this ...

Screw Plug heaters from WATTCO? consist of hairpin tubular elements that are brazed or welded into a machined pipe thread fitting, (normally an NPT fitting for North American standards) which are then screwed directly through a threaded ...

The Hot Plate HB-2000 from SMT Max contains a temperature range of zero to 70?C. The device is designed with ? ?0.5?C precision temperature, and an LED display. In addition, the plate is built in a 320 x 245 mm size, and 320 x 265 x 160 ...

Power: 4 kW - 80 kW

Maximum temperature: 106 ?C
Power: 50000 W

The paint heater Ecco H3000 is a high performance heater for most types of fluids. The heater work at pressure up to 400 bar, has a compact and robust design and is easy to maintain.

Maximum temperature: 70 ?C
Power: 250 W - 400 W

Product features Inserted heating cartridges with temperature control to heat the cold and viscous oil Temperature pre-selection outside (TA) or under the protection cap (TI) Thermostat to be set to 0? C to 85? C ...