Other laboratory analyzers

The Multigas-Analyzers of the INCA1021 series are designed for indoor installation and the analysis of condensate-free sample gas with or without pre-pressure. The device can be equipped with 1 sample gas inlet and 2 calibration gas inlets.

The Rapidox 1100ZR3 oxygen analyser allows fast and accurate gas analysis over the range 1ppm to 100%. Use of a multiplex controller provides sequential oxygen analysis over three separate gas channels that can be found on the rear of ...

NIR Multi Online Analyzer MYRG Real-time analysis of the raw material and end products at different measuring points, allowing smart and continuous control of ongoing production ? this is the true strength of the NIR Multi Online Analyzer ...

The new automated Q5000 SA is designed for high performance sorption analysis of materials under controlled conditions of temperature and humidity. Its design integrates our latest high sensitivity, temperature controlled thermobalance ...

WINDCRANE kit supplied pre-wired with backplate to attach to wall or monopole. This kit comes with: AC power supply for 100-240Vac 50-60Hz Backup battery and battery charger Wind speed sensor GSM mobile phone contract for 12 months to ...

The Aerotrac is an aerosol spray particle size analyser ideal for determining the particle size distribution of spray droplets from aerosols. Powered by the principle of laser diffraction the Aerotrac is complete system for spray characterisation ...

Features Only compact meter for a quick measurement of potassium ion using ion selective membrane.Flat sensor technology and 60 years of sensor engineering realizes a reliable and direct measurement of a drop of the sample from 0.3mL. ...

The G2/131 Model of Oxygen (O2) Permeation Analyzer, manufactured by Labthink Instruments Co., Ltd., is mainly used to calculate gas transmission rate through versatile packaging materials. This device is based on differential pressure ...

The Gasmet CMM mercury monitoring system can measure the lowest concentrations of total mercury in samples containing high amounts of dust and gases such as SO2, which traditionally have complicated mercury measurement in e.g. installations ...

Micromeritics? AutoChem 2950 HP Chemisorption Analyzer is an automated high-pressure catalyst characterization system that is capable of preparing and analyzing samples at elevated pressures up to 1000 psia and at temperatures from -100 ...

The 200 LANCOM Model of Dew Point Analyzer, manufactured by AMETEK Process Instruments, is specifically designed for monitoring in order to maintain working efficiency of coal or oil -fired boilers. This tool is also configured in cold-end ...

B4 size compact analyzer excellent in reliability, durability and maintainability Enables continuously measurement of turbidity, color, residual chlorine, pH, conductivity, temperature and pressure without reagents Equipped ...

The WITNESS? 301 is a modern environmental monitoring system developed by nextys. The system is used to log shocks, temperature, humidity and more optional parameters. These parameters are used to transport and store high-sensitivity ...

The VTI-SA+ Vapor Sorption Analyzer is a continuous vapor flow sorption instrument for obtaining precision water and organic vapor isotherms at temperatures ranging from 5?C to 150?C at ambient pressure. The VTI-SA+. Analyzer embodies ...

WINDCRANE kit supplied pre-wired with backplate to attach to wall or monopole. This kit comes with: Photovoltaic solar panel to work completely off grid & supporting bracket Backup battery and battery charger Wind speed sensor GSM mobile ...

The Tettex 2830 and 2831 is a new Precision Oil and Solid Dielectric Analyzer. It fuses a quick and profoundly developed system to measure Capacitance and tan ?, DC safety and relative permittivity er of fluid or strong protecting materials. ...

Features Only compact meter for a quick measurement of calcium ion using ion selective membrane.Flat sensor technology and 60 years of sensor engineering realizes a reliable and direct measurement of a drop of the sample from 0.3mL. ...

The GTR G2/130 from Labthink Instruments Co., Ltd., is a gas permeability tester for packaging. It is based on the differential pressure method, and is ideally suited for the determination of gas permeability of carbonated drinks bottles, ...

The Gasmet engine emissions monitoring system EEMS has been designed engine emissions monitoring which require for fast response time. A typical application for Gasmet EEMS consists of H2O, CO2, CO, N2O, NO, NO2, SO2, HCl, HF, NH3, CH4, ...

The hot-wet extractive systems need Continuous Emissions Monitoring systems. They take the flue gas sample from the output of the wet-scrubbers. The users are allowed to take a hot-wet oxygen measurement from the incoming feed line to ...

Designed for oil refinery Measures cloud point of petroleum products like gas-oil continuously Best suited for management of plant and product control Explosion-proof TIIS d2G4 certified

The ICM automatically measures and displays particulate contamination, moisture and temperature levels in various hydraulic fluids. It is designed specifically to be mounted directly to systems, where ongoing measurement or analysis is ...

True to its three decade legacy as the industry leader in power quality analysis, Dranetz proudly offers Encore? Series permanent monitoring system for power quality, energy and demand, and process monitoring. Encore? Series 61000 family ...

The IMR 7500 is a stationary, extractive flue/stack gas measurement system (CEMS). The IMR 7500 is type approved according to EN 14181 and meets the requirements of TA Luft, 13, 17 and 27 BlmSchV. Standard measuring components with electrochemical ...

Cytation? 5 is a configurable system that combines automated digital widefield microscopy with conventional multi-mode microplate reading to provide phenotypic cellular information and well-based quantitative data. This single instrument ...

The Rasi 700 BIO Portable Biogas analyser for accurate gas measurements with-in Biogas applications Measure O2, CO2,CH4 as standard Provide stable reading with-in seconds Optional H2S and CO measurement Measure Bio ...

ChemiSorb 2720/2750 has the capability to perform both physical adsorption and chemisorption measurements required for the development, testing and production of catalyst. ChemiSorb2720 is affordable and upgradable, ideal for modest ...

THE NEED A number of governmental air pollution regulations restrict the allowable stack emissions from various industrial facilities. Often, a facility will need to measure and report the emissions of a single pollutant being emitted ...

The ChemBET PULSAR TPR / TPD The PULSAR is a compact, bench-top catalyst characterization unit capable of automated TPR/TPO/TPD and pulse titration method of determining metal surface area, crystallite (nanocluster) size and dispersion. Fully ...

Measure soil pH and N/P/K in a simple visual soil test kit containing reagents and hardware for effective soil fertility monitoring. Measure soil pH, lime requirement, nitrogen, phosphorus and potassium (N/P/K) macronutrients using ...

Moisture plays an important role in determining product quality or as a process parameter during the processing of food and feedstuffs, chemical, pharmaceutical and mineral substances etc. High measuring throughput Whereas conventional ...

Dielectric cure monitoring measures electrical properties to determine the cure state and viscosity of thermoset materials, at the same time providing insight into chemistry, reaction rate, formulation and physical parameters. Instruments, ...

OXYMAT 64 can control the measurement of oxygen concentration in the smallest tracks, even down to the smallest measuring area of 0?10 ppm. This is for special interests in arrangements for the aerial decomposition, in the technical gas ...

THE NEED A number of governmental air pollution regulations restrict the allowable stack emissions from various industrial facilities. Often, a facility will need to measure and report the emissions of multiple pollutants being emitted ...

is a semi-automated analyzer designed to perform comprehensive catalyst studies by these techniques: Temperature Programmed Reduction Temperature Programmed Desorption Temperature Programmed Oxidation Pulse Titration Physisorption for ...

Developed in collaboration with the University of East Anglia, The National Trust, English Heritage and Historic Royal Palaces. The Hanwell DustBug has been designed to measure the accumulation of dust so that users can optimise the ...

-Run up to 12 samples simultaneously -Measure emulsion and suspension particle size -Measure particle size at high concentrations -Get fast and direct stability measurements -Obtain particle sedimentation and creaming ...

The TA.XTplus Texture Analyser is Stable Micro Systems' flagship texture analysis instrument, capable of measuring virtually any physical product characteristic such as hardness, fracturability, adhesiveness, gel strength, extensibility ...

The Nova 480 Series represent Nova's best value in continuous low range CO process analysis. This analyzer utilizes a long-life electrochemical 'fuel cell' sensor for the detection of CO in process gases. The sensor produces a small millivoltage ...

The STA HP TGA-DSC (STA Simultaneous Thermal Analysis) can measure both heat flow (DSC) and weight changes (TGA). The measurement of these properties are considered as a function of temperature or time in a controlled atmosphere. The ...

Most frequently used for demanding applications, the OXYMAT 6 must meet high standards with regard to reliability and measuring quality. This is guaranteed by modern electronics, ease of operation and a measuring bench that is adapted ...

Consistent Reporting & monitoring of the pollutants from the flue stacks released in the atmosphere is necessary according to various Environmental compliance regulations like EPA, initiated by the Government Agencies. Hence , reliable ...

The Orion L Microplate Luminometer is an instrument used for the measurement of 96 well plates. With a compact housing that has an internal wet system, the luminometer can also accommodate two reagent injectors. The device features luminescence ...

The Hanwell scanning and regulation systems is a totally modern Eo-friendly mechanism that offers sealed loop environments scanning using regulation abilities. It focuses on providing direct interface to a merchant BMS system or individual ...

Linseis offers a broad series of gravimetric sorption analyzers. Their incorporated solution provides the capability to independently manage the pressure, temperature and gas dosing. The GSA PT 10 range is manufactured according to ...

The DEA 288 Epsilon is a dielectric analyzer used in optimizing curing processes. This device from Netzsch permits operation in various test conditions, such as heat, cold, humidity or UV light. This allows the consumer to conveniently ...

Unique Features in a single Instrument MultiSpeed Peristaltic Pump Compact & Integrated analyzer: reagent drawer, XL pump, manifolds, heater, detectors and built in computer, Micro Flow, or Macro Flow, Select the one that meets ...

The SensEvolution Base? product line has been developed for providing industrial analysis in many application fields. These instruments are the result of combining the latest state-of-the-art-technology with over 60 years of industry ...

Flexible Connectable sensors for all required measurement tasks (air flow, air consumption, power consumption, pressure, temperature and many more) Up to 24 inputs through extension boxes and Modbus Several loggers can be ...

The GSA PT 100 is a gravimetric sorption analyzer that is ideal for use in automatically controlling the pressure, temperature , and gas dosing. The unit features a magnetic suspension balance that provides a reactor that is acceptable ...

The Model 4200 is manufactured by Ametek, and used in measuring dust emission concentrations on industrial processes and non-compliance applications. It is suited for multiprocess plants with common exhaust stacks, and is easy to operate ...

Model 6200T / 6200E Total Sulfur Analyzer The need to continuously detect for sulfides in carbon dioxide has become increasingly important within the food and beverage market. Gas suppliers must ensure that the CO2 they provide for use ...

Achieving genuine full automation of your analysis by continuous flow : by optimizing each individual step of this technique, the Futura analysers offer you the ideal solution for a very large number of applications, all of which are ...

The Protinus 1000 provides a particulate monitor ideally suited for continuous monitoring around mines, quarries, construction and other dust generating activities. The Protinus 1000 utilises size speicifc inlets to ensure accurate real-time ...

The GSA PT 1000 Gravimetric Sorption Analyzer is mainly designed to provide an excellent quality performance and functionality. It provides a wide variety of gravimetric sorption analyzers which is considered as the solution which offers ...

ABB Reid Vapor pressure Analyzers - RVP4500 Series are suitable for precise measurement of Reid Vapor Pressure for the entire gasoline range along with its feedstocks. The microprocessor-based single board computer series provide an approximate ...

The CEM/O2 is a continuous emissions monitoring system manufactured by Ametek. It takes the flue gas sample from the exit of wet-scrubbers by means of hot-wet extractive systems. The system uses an oxygen analyzer suitable for keeping ...

The Quikchem 8500 flow injection analyzing system from Lachat is engineered to deliver high throughput levels, as well as quick and easy method switching. It optimizes the production through identifying the ionic specimen across different ...

With the Proxima, SFA technology is no longer reserved for the highly trained technician. Setup is easy, and operation is simple. The system will analyze between one (1) and five (5) analytes simultaneously at the detection limits defined ...

The Spirant BAM automatically measures and records airborne particulate concentrations using the beta ray attenuation method. It is designated by the U.S. EPA as Federal Equivalent Method for PM10 and PM2.5 monitoring. Features & Specifications ...