Multi-gas analyzers

The Safe Side of Flash Point Testing The ERAFLASH measures according the continuously closed cup flash point testing methods ASTM D7094 and ASTM D6450. ASTM D7094 shows no statistical bias to the former ASTM D93 Pensky Martens method. ...

Sulfur & Carbon by high temperature combustion and Infrared detection technique The new LECOLECO?s 832 Series of Elemental Determinators are specifically designed to perform carbon and sulfur analysis of coal, coke, lubricants, fuel ...

The CODEL TunnelTech 401 NO2 CO, NO and Visibility Air Quality Monitor is a compact extractive analyser configured for the continuous measurement of four key parameters in road tunnels. This extremely stable and reliable monitor incorporates ...

TransPRO? KGX3 series on-line dissolved gas monitor is capable of continuous monitoring of dissolved H2, C2H2, CO and moisture in oil individually and in real-time. This product is designed for on-line incipient fault detection for oil-filled ...

The Venus 301 is a methane analyzer developed by NIRA Srl specifically designed to be used in chromatographic analysis. It is equipped with a graphic display to discriminate the accurate analytical procedures with ambient factors like ...

The GCEM4000 is a multi-channel flue gas analyser that uses Non-Dispersive Infrared Absorption (NDIR) technology. It provides high accuracy, low maintenance measurement of all the key combustion process emissions to atmosphere. It is ...

The single-channel M300 TOC is a transmitter for Total Organic Carbon (?gC/L), conductivity and temperature measurements. This transmitter features easy operation through its large display, plain-text interface and "Quick setup" menu, ...

Continuous, on-line intelligent dissolved gas and moisture monitor with enhanced oil recirculation. The latest addition of our KG X series on-line DGA can be mounted in a single valve with a simple, light-weight and easy-to-mount solution. ...

Unigas 3000+ is an advanced flue gas analyzer. The device can be used with up to 4 gases i.e. O2, CO, NO & NO2 or SO2 along with electrochemical sensors, plus CO2 and NOx calculated. It can provide data or up to 10 fuels for the purpose ...

NIRA Analyzer Mod. JUPITER 501 is a very sensitive instrument specifically designed to automatically measure traces of organic volatile components in air. It is an automatic equivalent system for sampling and measuring:benzene, toluene, ...

The 6510i Dissolved Ozone Sensor with ISM has an operating range of 0-5000ppb (mg/l). The full features of ISM, such as full sensor identification, calibration history, Adaptive Calibration Timer, Time to Maintenance, and Dynamic Lifetime ...

The Smartchem is also the first discrete analyzer to utilize a dedicated sample prep module for the determination of NOx by Cadmium reduction. Designed for multi-tasking and high throughput rates, the NOx module also provides automated ...

The UniGas 2000 is a 1.1-kilo flue gas analyzer for O2, CO, and NO gases. It is equipped with electrochemical sensors, audible alarms on gases measurement, and a built-in impact printer. The model is also CO2 and NOx calculated. For ...

The Mercury 901 is manufactured by Nira Instruments, and is a transportable automatic analyzer that has a flame ionization (FID) detection system. It has easy reading due to its color TFT screen, which has an ergonomic design configuration ...

The LECO RC612 edition is a multi-phase carbon and hydrogen/moisture determinant that is engineered to analyze the carbon and hydrogen content present in various organic and inorganic samples. It is also capable of identifying the source ...

Featuring the M800 multi-parameter transmitter, the Thornton 5000TOCi is an affordable and easy-to-use analytic package. Its design allows for it to be coupled with the M800 ISM transmitter from Thornton, which is available in either ...

The Smartchem: fully automated discrete analyzer to minimize human intervention, improve analytical performance, and streamline sample workflow The Smartchem combines the latest technology in discrete analysis with an innovative, unique ...

Our NEW INFRARED LEL MONITORING SYSTEM proposes some innovative technical characteristics, which allows fast response time, simple installations and low maintenance procedure. Our innovative Infrared sensors differ from all the other ...

It is applied to determine the fluorine and chlorine content in coal or other combustible material. Test range?Fluorine:10ppm?2000ppm Chlorine:30ppm?3000ppm Test time?Including calibration of electrode parameters, sample decomposition ...

The 4000TOC Sensor and M300 single-channel transmitter is a cost-effective solution for continuous TOC monitoring. It meets the requirements of Real-Time-Release (RTR) and Process Analytical Technology (PAT) for major Pharmacopeia. It ...

The Greenline 8000 by AOIP is a Flue gas analyzer which can measure up to 9 gases. This includes O2, CO, NO, NO2, SO, CxHy and H2S which uses an electrochemical sensor. In addition, it can also measure gas such as CO2, CxHy and CO using ...

The Aries 1001 series is manufactured by Nira. It is designed for the determination of total organic compounds in emission from combustion plants (Methane and non-methane). The 1000 series is precise, simple, and has long term stability. ...

The natural gas pipeline operations are affected by the formation or presence of the liquids in the gas pipelines. In order to restrict the formation of the liquid in the pipeline, the dew point of the natural gas should be checked on ...

Features and Benefits: ?In-situ, no gas sampling ?No cross interference ?Fast response less than one second ?Diverse optical length (0.5~20m) ?Reliable in all harsh conditions: high temperature & pressure, dust density, moisture ...

Parr?s Apparatus for Vapor Pressure Determination is a common leak test for Parr pressure vessels. The test involves filling a vessel with nitrogen at 300 K to 50 bar. The filled vessel will then be heated to a temperature of 600 K. Doubling ...

The presence or build-up of liquids within the gas pipeline severely effect the Need Natural gas pipeline operations . To avoid liquid formation within the pipeline it is important to measure the dew point of the natural gas periodically. ...

Testo 310 is fitted with 2 measurement cells for CO and O2 and a temperature sensor that is fitted within the flue gas probe. The gas sensors have the ability to measure accurate carbon monoxide and oxygen content and also ambient temperature ...

The heart of a TGA is the balance cell. Our TGA instruments use the world?s best METTLER TOLEDO micro and ultra-micro balances. The internal calibration ring weights ensure unsurpassed accuracy. Thanks to the parallel-guided balance the ...

Mission Critical Process Moisture Analyzer Designed to Handle Rigorous Demands of Moisture Measurement in Natural Gas Applications, Provides Fully Automatic Self-Calibration Dew Point System, Provides Cost Effective Solution for Demanding ...

The binary stream gas analyzer in the 50 series from AGC Instruments is the only gas analyzer available that is capable of measuring more than 500-ppm and less than 500-ppm N2 in H2. This reduces the time and expenses typically associated ...

The data acquisition and control electronics of the "zero footprint" Smart Sensor Residual Gas Analyzer can be mounted directly on the sensor. It can be connected to a computer via its RS-232 port or RS-485 port for multiple analyzer ...

Efficient, reliable, easy-to-use, ergonomic and robust; these are some of the words that can describe Testo's multi-functional testo 320. Designed as an instrument to analyze flue gases for heating systems and more, the top-quality testo ...

The heart of a TGA is the balance cell. Our TGA instruments use the world?s best METTLER TOLEDO micro and ultra-micro balances. The internal calibration ring weights ensure unsurpassed accuracy. Thanks to the parallel-guided balance the ...

The XTDL-??HR? is designed with a new proprietary optical sampling system for moisture dew point in your high CO2 gas applications. From beverage&food to plastics applications, the COSA Xentaur XTDL-??HR? was designed to accurately measure ...

Increased sensitivity and decreased background noise are possible due to the ionizer design. An enclosed ion source operates with sample pressures as high as 10-3 torr with no need for futher pressure reduction of this differentially ...

Ozone Analyzer FPI AQMS-300 Ozone (O3) analyzer measures ambient O3 concentration in ppb level by utilizing UV photometric absorption technology. Key Features Accurate direct UV absorption with reference comparison Various outputs ...

The flue gas analyzers in the Testo family feature new instrument functions that offer reliability and support. The Testo 330-LL series comes with a color display that has a high resolution, extended measurement menus for gas pipe testing, ...

Gas Concentration Monitor, IR-150 Overview HORIBA has used its gas analysis technology and cleaning process experience to develop a new gas concentration monitor. HORIBA has honed its knowledge over many years through the development ...

The IAG Versa is a FAS FTIR-analyser system which may be employed in a variety of ways, such as the regulation of gas flow and the handling of multiple integration options in the test bench environment. The instrument features a fixed ...

The Series 100 Trace N2 Gas Analyzer is developed for the continuous monitoring of N2 in argon or N2 in helium. This analyzer is suitable for measuring with a range of 0-100ppm. A low detectable level of 10ppb is also achieved by the ...

The Mobile Residual Gas Analyzer, manufactured by AMETEK Process Instruments, features a mobile cart system which can be facilitated with any type of Dycor residual gas analyzer. This device is configured in a small and solid design. ...

Carbon Monoxide Analyzer FPI AQMS-400 carbon monoxide (CO) analyzer measures ambient CO concentration by employing non-dispersive infrared with gas filter correlation method technology Key Features 14 meters optical path to perform ...

Whether you are testing for compliance or troubleshooting and tuning your combustion process, the testo 350 portable emission analyzer has everything you need. Ultra-rugged construction Simple intuitive operation Innovative ...

The Micropole is a compact residual gas analyzer with a patented design featuring a number of quadruple mass filters. This array of filters offers equal or greater sensitivity than a conventional mass spectrometer, except that it is a ...

The KMS Versa Plus measurement system was developed by IAG, and combines options given by FTIR technology and the reliability of standard measurement technology. Developments such as a climate control unit and safety switches were installed ...

The 9500 Bench DO2 Meter is a research meter manufactured for various applications which include fish farming and breeding. It also fits all types of aquaculture, environmental analysis, and pollution prevention. The device features a ...

The KLL-Q-2 is manufactured by Seba Hydrometrie, and is an electric contact meter that is ideal for use in groundwater, lakes, and reservoires with a depth ranging down to 500 m. The unit provides values for a variety of parameters including ...

2 interchangeable sensors. Mobile application, 15 programmed combustibles. Data measurement print out. Supplied with magnetic protective cover. Key points Sensors protection with pump auto-stop Step-by-step procedure ...

The Fyrite? INSIGHT? Plus combustion analyzer represents a next-generation 5 in 1 analyzer, that combines the combustion and efficiency analyzer (up to 9 fuels), a room air CO test instrument, a flue gas CO tester, dual channel digital ...

The IAG NHS is a 191?C heated diode laser ammonia detection system. This very compact and light system can be used in a wide variety of applications. 2 sample gas inlets, built in gas inlet pressure regulator, heated sample gas filter, ...

The Veri-GAS CO2 analyser measures Carbon Dioxide from pressurised sources such as gas cylinders. Typical applications include measuring percentage CO2 in CO2 /Ar welding gas mixtures or other mixtures such as Carbon Dioxide / Nitrogen ...

The portable AMI Inspector is manufactured by Swan Analytical Instruments, and is a complete monitoring system that is equipped on a small panel with supporting stand and a rechargeable battery for stand-alone operation. It has a measuring ...

The portable instrument for water quality measurement in rivers. For connection of multiparameter probes MPS-D3, MPS-D8 and MPS-K16 Parameters: ?C, conductivity, salinity, O2, pH, ORP, NH3, NO3-, Cl-, NH4+, Na+, Ca2+, F-, K+, turbidity, Chl a etc.

The AQ 100 is an air quality analyser. The AQ 100 is designed to take accurate measurements of CO2 levels and temperatures. The unit features measuring range of 0 to 5000 ppm for CO2 and -20 to 80?C for temperature. The AQ 100 ...

The Fyrite? InTech? residential analyzer is a robust, lightweight, reliable, and long-lasting functional handheld unit that provides technicians with the most convenient and cost-friendly means to achieve electronic-combustion testing ...

The wastewater is led to a sample pool and mixed with a certain quantity of NaOH. All ammonium salts in the sample will be transferred to gaseous ammonia and spread to a measurement colorimetric pool installed with a measuring indicator. ...

Description Monitor for the continuous measurement of dissolved hydrogen in water steam cycles. Integrated auto verification with faraday electrode setup. Range: 0,1 - 800 ppb or 0-50 % saturation (at 25?C). Automatic air pressure and ...

The Rasi 700 BIO Portable Biogas analyser for accurate gas measurements with-in Biogas applications Measure O2, CO2,CH4 as standard Provide stable reading with-in seconds Optional H2S and CO measurement Measure Bio ...