Shell-and-tube heat exchangers

The PICKER heat exchangers range mainly consists of 6 families, each with its own body diameter and a given number of tubes, and there are even multiple optional versions, depending on : > the construction materials, > the SHELL-SIDE ...

The "ECONOMIZER" heat exchanger patented by CORAL ena- bles recovery of the heat dispersed into the atmosphere from combustion fumes of industrial heaters or from other hot fluids, sending hot air into the environment. WORKING PRINCIPLE: The ...

Efficiently recover valuable waste heat BTUs from hot gases to heat water or other liquids the direct contact way with a QSense? Heat Exchanger. An optimal solution to reduce energy consumption and save on expensive fuel costs, while ...

PICKER heat exchangers are all SHELL-SIDE single fluid flow cycle models (around the tubes) and, depending on the family of exchangers, can feature single, double, triple or quadruple TUBE-SIDE fluid flow cycles (in the tubes). Depending ...

Our production is based on the design and the manufacture of finned heat exchanger coils for cooling and heating the air

Operating pressure: 613 bar
Temperature: 400 ?C
Power: 5000 W - 45000 W

The heat exchanger is perfectly suitable for smaller baths or for instances where there is limited space. Providing a greater output for the smallest space is just one of the realized benefits on account of the good ratio between the ...

Temperature: 50 ?F - 60 ?F
Power: 1500000 BTU/h

Operating pressure: 10 bar
Temperature: 200 ?C

Operating pressure: 10 bar
Temperature: 150 ?C

Operating pressure: 100000000 Pa
Power: 0.5 W - 100 W

Operating pressure: 10 bar
Temperature: 200 ?C

The Bulk-X-Change Heat Exchanger from Coperion provides heating and cooling applications for independently-flowing solid bulks. It is available in various configurations (according to the composition of the product): the inline gravity ...

The combined heat exchangers combine the advantages of tubular heat exchangers and electrical heating. If the heating fluid is not yet available (e.g. boiler fired by heavy oil), electrical preheating is effected. The tubular heating ...

Operating pressure: 21.5 bar - 28 bar
Temperature: -60 ?C - 120 ?C

Temperature: 1090 ?C - 1149 ?C
Power: 18000 W - 117000 W

Operating pressure: 60 bar
Temperature: -50 ?C - 500 ?C

Operating pressure: 1200 Pa - 2200 Pa
Temperature: 120 ?C - 210 ?C
Power: 16 kW - 1000 kW

Operating pressure: 1 bar - 150 bar
Temperature: -200 ?C - 500 ?C

Operating pressure: 15 bar
Temperature: 110 ?C
Power: 15 W - 1400 W

SmartHeat is certified for design and manufacture of Class D pressure vessels Fixed plate type, floating head type, U-tubing type, packing type, kettle-type, sliding tube-sheet type, bayonet-type exchanger SmartHeat has accumulated ...

Operating pressure: 0 bar - 25 bar
Temperature: 0 ?C - 130 ?C
Power: 30000 W

Operating pressure: 10000 Pa

Operating pressure: 0 bar - 800 bar
Temperature: -260 ?C - 800 ?C

Temperature: 180 ?C

Operating pressure: 0 bar - 800 bar

Maag?s heat exchangers can be used either as pre-heaters or coolers. They control polymer melt temperatures at viscosities as high as 100,000 Pas. Alternating right- and left-hand helical elements form a unique pattern that simultaneously ...

Power: 14000 W - 1750000 W

The temperature decrease is provided by hairpin-shaped ducts which artificially increase the distance covered by gases in ducts, enabling longer exchanges between ambient air and gases. This technique leads to an additional 5-10?C temperature drop.

Power: 0 kW - 10.5 kW

Operating pressure: 5 bar
Temperature: 200 ?C

Operating pressure: 50, 130, 16, 110, 25 bar
Temperature: 300, 150 ?C
Power: 6000, 36000 W

Operating pressure: 10 bar
Temperature: 180 ?C

Solar to Air heat exchangers

Instantaneous water-to-water heat transfer with pumped boiler water circulation. The WU, equipped with a B&G Booster Pump, pumps boiler water through the shell, thereby greatly increasing the capacity of the heater. Large volumes of ...

The Tubular heat exchanger Series Pure flux P2 is manufactured by HST Hydro-Systemtechnik GmbH. The product has reliable framework that is commonly utilized for waste water heat utilization such as waste water, with its high temperatures, ...

The DTC series is a unit manufactured by Sentry Equipment. It is a tube tube heat ex-changer with an excellent fluid slurries. It has wide variety of materials available including copper, 316 Stainless Steel, Inconel? 625, Hastelloy?, ...

The X series by WTK srl is a Coaxial heat exchanger which can function as a Contra flow coaxial heat exchangers. Also, it can be used as a condenser and evaporator having a capacity of 4 up to 100 kW. The tool has internal tubes that ...

SHELL & TUBE TYPE HEAT EXCHANGER ? in energy recovering appiications, in severai sectors, considering easy cieanabiiity, U type and straight type pipe exchangers ensures process easyness. ? it provides economicai soiution to acqurie ...

Bossmanfilter BEX - Series Shell and Tube heat exchangers system consisting of two pressure chambers and separated by the internal tube wall.One medium flows through the shell chambers and the second medium flows through the tube chamber.The ...