Plasma surface preparation machines

Evaporation boats made of tungsten, molybdenum and tantalum are available in many different widths, lenghts, material thicknesses and volumes directly in the producer's online shop: shop.plansee.com Evaporation boats from Plansee offer ...

Superfine tips/nozzles are designed for precision spraying with the ultimate in high quality atomisation. The unique design, which incorporates a matched pre orifice within the assembly, enables users to greatly reduce fluid pressures, ...

Evaporation coils are available in many different lenghts, diameters, coil lenghts and coil pitches. These resistance heaters with their very high melting points will bring practically any metal to the boil. At the same time, their high ...

Orifice diameter: 0.4 mm - 2.7 mm

Orifice diameter: 0.2 mm - 0.9 mm

The F2 Model is a flame surface treatment equipment developed by LC Printing Machine Factory. It is specifically built suitable for the surface pre-treatment of PE and PP plastic products. The unit comes with baffle-boards to improve ...

Enercon offers a complete line of corona, atmospheric plasma and flame surface treaters for promoting surface adhesion on a wide variety of films and 3 dimensional objects. These systems clean, etch and functionalise surfaces to enable ...

RF Atom Source for atomic oxygen and atomic nitrogen Minimized power losses due to optimized design Discharge zone is manufactured from high-quality materials ensuring a minimal contamination of the beam Zero-ion current configuration ...

The plasma source in this series can be incorporated into a vacuum chamber, generating high-density plasma. This product can also be used as a plasma-assisted deposition unit, making it possible to improve the properties of the film for ...

The production system Tetra 2800 LF-PC with its 2800-litre chamber volume and PC control is mainly used in series production (cleaning, etching and activation): Technical data Switch cabinet: W 600 mm, H 1700 mm, D 800 mm Chamber: ...

Special plasma system Tetra 2 PC, roll-to-roll Technical data: Housing: W 3491 mm, H 1000 mm, D 1278 mm Chamber: L 1050 mm, ? 90 mm Chamber volume: approx. 2 litres Gas supply: 2 gas channels via MFCs Generator: ...

They work in a resonant way of high efficiency in order to obtain a high quality uniform treatment. Power range: from 1 to 20 KVA. They are both robust and highly reliable and easy to use due to the simplicity of their sinoptic control ...

Nordson MARCH's ModVIA? system can be upgraded from 4 to 8 plasma cells to grow with production requirements and operations and is ideal for small- to medium-sized businesses or R&D institutions that process low-volume, high-mixture products Designed ...

The AP-300 and AP-600 plasma treatment machines are benchtop-style, completely self-contained, requiring minimal bench space. The system chassis houses the plasma chamber, control electronics, 13.56 MHz RF generator, and the automatic ...

Tantec RotoVAC vacuum plasma treater is designed for plasma treatment of small injection moulded plastic parts, without the need to place them in a jig or use complicated handling systems. With the RotoVAC drum design, simply fill the ...

Compact design semiconductor generators Machine interface, industry standard External power setting Digital power display

The Arcojet® PG 051P is used in the treatment of smaller plastic components, in particular plastic profiles in extrusion lines, injection-moulded components as well as cups and tubes prior to adhesive joining and printing. Treatment ...

Orifice diameter: 1.2 mm

High-performance systems: Atmospheric plasma system PB3 and PS2000 Perfectly coordinated components in robust industrial design: 19-inch high power voltage supply PS2000 and plasma generator PB3, connected through a flexible 10m cable ...

Plasma Devices with Cutting-Edge Piezo Technology: PZ2 In order to provide products having convincingly compact dimensions, we developed the PDD? Technology. PDD stands for Piezoelectric Direct Discharge. It is based on the direct, electric ...

Corotec Corporation has introduced a new line of Plasma-Jet? surface treatment systems for 3D parts. These new systems feature a smaller and more compact discharge head design 50% smaller than the standard design which enables installation ...

The NEW Corotec Pulsed-Plasma? treating system is designed specifically for treating hard-to-reach surfaces of medical and other devices, such as the insides of the plastic hubs that hold hypodermic needles and dispensing nozzles, to ...

The batch system V10-G is designed for the removal of photoresists. Furthermore it can be optimally used for the cleaning of wafers. Areas of application Ideal system for removing photoresist layers (also SU-8) after dry processes ...

Single nozzles: PFW10 and PFW20 Pretreatment with the Openair? PFW10 plasma nozzle is done with very high contour accuracy and is potential-free (no transfer of voltage to the material). This type of plasma nozzle is mainly used when ...

The FG5001 Plasma Generator is the basic unit of the Plasmatreat generator 5000 series. It is distinguished by its particularly compact design allowing space-saving under-counter integration. For the first time, a constant voltage source ...

The new generation corona discharge generators represent the new industrial standard for this type of device. The -MOSFET- modules installed in them, featuring high switching speed with low losses, combined with the configuration of ...

The high-voltage generators are used to produce the corona energy in combination with the calvatron? treatment systems (MX 22, NX 11 and SX 22). The PLC control facilitates easy and fast control of the system. The integrated system ...

By definition all surface treatments require special attention to the first atomic layer. The first step to any surface treatments, being PVD or other coatings, consists in a phase of cleaning and / or followed by surface activation. Various ...