CÔNG TY CỔ PHẦN VNATION
Hotline:
0939 021 319 / 0988 930 207
Home
Products
News
Services
Support
Contacts
Home
Machine-tools
Machine Tool Accessories
Lathe manual chucks
Lathe manual chucks
Machine Tool Accessories
Tool-holders
Lathe tool-holders
Angle heads
Multi-spindle heads
Drill chucks
Collet chucks
Lathe manual chucks
Lathe power chucks
Lathe centers, tailstock
Expandable chucks
Spindles, motor-spindles
Machining heads
Drilling units
Tapping units
Tool turrets
CNC tool changers
Indexing tables, rotary tables
Tilting rotary tables
Magnetic chucks
Vacuum chucks
Clamping plates
Clamping plates
Machine tool vises
Pneumatic clamps
Hydraulic hinge clamps
Zero-point quick clamping cylinders
Other clamping and workholding elements
EDM tooling
Tool setters, machine tool monitoring
Tool sharpening machines
Human machine interfaces, dialogue terminals
Machine feed
Chip conveyors, cutting fluid filters,...
Modular coolant hoses
Extractors: oil mist, sawdust
Machine safety: working environment, panels, machine frames
Protection bellows
Machine lighting
Replacement monitors for CNC
Turning chucks
Clamp chucks
Clamping cylinders
Electrical discharge electrode holders
turning chuck / gripper / 2-jaw / indexing
Indexing chucks are intended for use where the customer needs to machine several axes on the same work piece. Used primarily in turning operations, the index chuck provides the customer extensive savings in setup reduction.
turning chuck / manual tightening / stationary / 3-jaw
Y CHUCK
The static chuck YC joins SC range with a new feature to change in an extremely compact and strong vise.
turning chuck / manual tightening / gripper / 2-jaw
SC 3, SC 4
SC-3 manual chucks, non-rotating with 3 jaws Manual chucks, non-rotating, with mounting crews set of 3 soft jaws and key. SC-4 manual chucks, non-rotating with 4 jaws Manual chucks, non-rotating, with mounting screws set of 4 soft jaws and key.
manual tightening chuck / gripper / stationary / 3-jaw
FSG 20-380
Diameter
: 100 mm - 220 mm
Gripping force
: 2000 N - 3500 N
turning chuck / manual / 3-jaw / EDM
MacroJunior
Gripping force
: 5000 N
turning power chuck / manual tightening / 3-jaw / through-hole
QJR07,QJR08,QJR10,QJR 12
Diameter
: 254, 178, 315, 210 mm
Rotational speed
: 3500, 4500, 5000, 6000 rpm
Gripping force
: 180, 100, 60, 135 kN
turning power chuck / 3-jaw / through-hole / with jaws
QJR07
Diameter
: 0 mm - 178 mm
Rotational speed
: 0 rpm - 6000 rpm
Gripping force
: 0 N - 60000 N
turning chuck / gripper / stationary / 3-jaw
FSG 50-1150
Diameter
: 300 mm - 865 mm
Gripping force
: 20000 N - 29000 N
turning chuck / manual / 6-jaw / EDM
Macro Standard
Diameter
: 75 mm
Gripping force
: 6000 N
turning chuck / manual tightening / 3-jaw / through-hole
SC-3(F)
Diameter
: 2 mm - 70 mm
Rotational speed
: 0 rpm - 2500 rpm
Gripping force
: 0 N - 9000 N
turning chuck / manual tightening / diaphragm / 3-jaw
TMAD series
Use: for second operations in turning, hardturning, grinding and checking Very good accuracy and repeatability Totallly sealed; maintenance-free Supplied with quick change top jaws TMCR (patented TOBLER system) that allows change from ...
turning chuck / manual / gripper / 3-jaw
TMS series
The manual quick change TMS is equipped with a set of segments which through simple location of the body on the spindle nose actuates the drawbar for clamping and unclamping. The body is self-centering on the spindle nose by means of ...
turning chuck / diaphragm / 3-jaw / precision
D series
Diameter
: 210 mm - 400 mm
turning chuck / manual tightening / gripper / 3-jaw
ROTA-S plus 2.0
ROTA-S plus 2.0 has started replacing the popular hand-operated chuck from SCHUNK in sizes 160 - 315 mm. Its innovative collect bar drive delivers superior clamping force while the quick change jaw system is noted for easy jaw changing ...
turning chuck / milling / grinding / clamp
SPANNAX®
This compact chucking system is utilized on grinding, milling, turning and indexing table machines. The system has a modular design which means that individual chuck components can be used as needed. All that is needed is the size of ...
turning chuck / manual tightening / 3-jaw / lathe
ROTA-S plus
Rotational speed
: 5400 rpm
Gripping force
: 65 kN
milling chuck / for drill / machining / manual tightening
SPANNAX® SSM
Diameter
: 4 mm - 100 mm
Length
: 110 mm - 200 mm
turning chuck / manual / clamp / 3-jaw
ROTA-G
Rotational speed
: 4600 rpm
Gripping force
: 95 kN
manual chuck / 3-jaw / through-hole / self-centering
ø 160 - 630 mm, 4200 - 9200 daN
Diameter
: 160 mm - 630 mm
Rotational speed
: 688 rpm - 3820 rpm
Gripping force
: 4200 N - 92000 N
turning chuck / lathe
UGE-UGU onlineshop
turning chuck / manual / 3-jaw / quick-change
DURO-T
Rotational speed
: 1100 rpm - 6000 rpm
Gripping force
: 23 kN - 320 kN
turning chuck / pneumatic / clamp / 6-jaw
AIREX series
There is an air cylinder containing an internal tapered piston, and this allows firm clamping of the core with high output. Additionally, the contact surface area with the core is large in order to withstand high loads. Types are classified ...
machining chuck / manual / clamp / 3-jaw
DURO TA-XT
Rotational speed
: 570 rpm - 800 rpm
Gripping force
: 8 kN - 290 kN
turning chuck / manual tightening / 4-jaw / lathe
260.11
Diameter
: 57 mm - 630 mm
machining chuck / manual tightening / 3-jaw / 4-jaw
3 ZF series
Diameter
: 73 mm - 243 mm
Length
: 31 mm - 67 mm
turning chuck / clamp
PZ
The pneumatic pliers type PZ have been studied to provide a quick and safe blocking of parts with a round, hexagonal or square section. FEATURES - Body: cast iron. - Elastic pliers carrier quill: rectified tempered steel, suitable for ...
turning chuck / dead length collet / 3-jaw
CB-ND series
Diameter
: 42 mm - 140 mm
Rotational speed
: 4000 rpm - 6000 rpm
Gripping force
: 63007.73 N - 128957.45 N
manual tightening chuck / 3-jaw / through-hole
3 ZA series
Diameter
: 125, 80, 110 mm
Length
: 35, 34, 40 mm
manual tightening chuck / 3-jaw / 6-jaw / through-hole
3 ZAS series
Diameter
: 160 mm - 600 mm
Length
: 67, 88.3, 48.5 mm
turning chuck / hydraulic / clamp / 6-jaw
200 - 400 mm | KAF
The collet bar chuck KAF is a purely radial clamping version of the hydraulic clamping chuck. That is why it is possible to cover an even greater clamping range per chuck size. Due to the purely radial clamping movement, workpieces with ...
manual chuck / 3-jaw / self-centering
MC-SM
Diameter
: 1600 mm
turning chuck / clamp / 3-jaw
200 - 400 mm | KAF
Using the collet bars integrated in the body of the chuck we can set the point of force application relatively far from the point of actual workpiece clamping. This means that our customers can place long (e.g. wave-shaped) workpieces ...
turning chuck / manual / 3-jaw / self-centering
GD-M-3A
The GD-M-3A is a self-centering lathe manual chuck developed by Romotors Torino. It is supplied with 3 self-centering jaws though the manual actuator with independent adjustment for each jaw. The unit also comes with 800 mm to 4000 mm ...
turning chuck / manual tightening / gripper / lathe
200 - 400 mm | KAF
Lathe chucks - Independent plates - Lathe chucks and independent plates with big diameter (up to ? 4300 mm) - Adaptor plates - Jaws - Spare parts and accessories - Jaw turning rings - Box jaws
turning chuck / manual tightening / gripper / 4-jaw
G D-M-4I
Diameter
: 800 mm - 4000 mm
turning chuck / flange / pull-back
BKFF series | Ø serrage entre 7,8 mm et 73,6 mm
Diameter
: 90 cm - 200 cm
Gripping force
: 8500 N - 40000 N
turning chuck / diaphragm / 6-jaw / precision
DPH-600W
Diameter
: 6 in
turning chuck / manual tightening / clamp
System SZ
Diameter
: 210 mm
Gripping force
: 20 kN
Length
: 175 mm
turning chuck / clamp / 3-jaw / heavy-duty
System SM
Diameter
: 315 mm
Gripping force
: 30 kN
Length
: 310 mm
turning chuck / manual / gripper / quick-change
QCS series
Time-intensive changing was yesterday In the meantime, one of the most spectacular elements of the Formula-1-races are the pit stops which often decide on victory or defeat and take place in breathtaking speed. Together with the driver, ...
turning chuck / manual tightening / 6-jaw / lathe
AT series
Diameter
: 2.56 in - 10.83 in
Rotational speed
: 1100 rpm - 1600 rpm
Length
: 2.76 mm - 3.98 mm
turning chuck / manual tightening / pull-back / 3-jaw
TOROK SE series
Diameter
: 66 mm - 100.5 mm
Rotational speed
: 5000 rpm - 8000 rpm
Gripping force
: 120 kN - 172 kN
turning chuck / manual tightening / stationary / 2-jaw
MMY
The Kurt has manufactured the MMY two jaw MultiChuck, used for hand tightening. The tool offers a manual self-centering static work holding, utilized for machining centers, milling machines and grinders. This equipment is capable ...
milling chuck / manual tightening / pull-back / 3-jaw
TOROK RD
Diameter
: 43 mm - 100.5 mm
Rotational speed
: 5000 rpm - 7000 rpm
Gripping force
: 71 kN - 150 kN
manual tightening chuck / 3-jaw / lathe
TOROK SE CFK
Manually actuated clamping head/chuck solution with hexagonal clamping geometry. Advantages Made of carbon fiber As much as 70 % lighter than the standard version 25 % higher holding power than SPANNTOP Unequalled ...
machining chuck / manual tightening / stationary / 3-jaw
MANOK
Diameter
: 56 mm - 102 mm
Gripping force
: 80 kN - 150 kN
Length
: 214 mm - 264 mm
turning chuck / hydraulic / gripper / 2-jaw
MD series
MD is an automatic indexing chuck with hydraulic clamping and indexing. It is not self-centering. tecnomors is backed in the design and manufacture of MD indexing chucks by its exceptional experience matured in the construction of this ...
manual chuck / stationary / workpiece
MANOK plus series
Diameter
: 65 mm
Gripping force
: 105 kN - 120 kN
Length
: 257 mm
turning chuck / manual / clamp / 2-jaw
MAD/V series
Chucks series MAD are self-centering. In version MADT jaws clamping is automatic trough a draw rod and a rear cylinder, in version MADV jaws clamping is manual thanks to an operating key. Chucks MADT and MADV have booth manual indexing ...
turning chuck / manual tightening / 4-jaw / EDM
FT 02110
Gripping force
: 4000 N
turning chuck / gripper / 4-jaw / EDM
FT 01334
The ER chuck 80P (FT 01043) is manufactured on a WEDM angle (FT 01338). It is developed based from the standards set for the fast clamping with set of F-tool stop beads. This device has an average height of 40 mm.
turning chuck / manual tightening / 3-jaw / self-centering
DK11 series
Diameter
: 55 mm - 260 mm
Length
: 50 mm - 90 mm
turning chuck / 3-jaw / 5C
DM-010 series
Diameter
: 1 mm - 28 mm
Length
: 6.35 mm - 50.8 mm
turning chuck / grinding / permanent magnet / stationary
FERROMAX
Diameter
: 100 mm - 200 mm
turning chuck / manual tightening / 3-jaw / EDM
DBF series
Diameter
: 55 mm - 160 mm
turning chuck / manual tightening / clamp / 6-jaw
Watchmaker chucks
Diameter
: 56 mm - 75 mm
turning chuck / manual tightening / flange / 3-jaw
ROTA-G
Diameter
: 160 mm - 250 mm
Rotational speed
: 0 rpm - 4000 rpm
Length
: 91 mm - 122 mm
turning chuck / gripper / 3-jaw / through-hole
ø 0.165 " - 0.417 ", max. 51542 lbs | B/BT series
Rotational speed
: 1400 rpm - 5500 rpm
turning chuck / hydraulic / expandable
0.213 " - 0.417 ", 3300 - 8000 rpm | B200/BT200 series
Coils are loaded on the expanding mandrels to be held firmly in place during the uncoiling and coiling process. Fives offers a wide range of mandrels specially designed for these operations. "Reverse pyramid" shaft mandrels Compared ...
Partners