turning chuck / manual tightening / flange / 3-jaw
ROTA-G
Vnation JSC
-
Function:
turning
-
Clamping method:
manual tightening
-
Type:
flange
-
Number of jaws:
3-jaw
-
Other characteristics:
lathe
-
Diameter:
Min.: 160 mm
Max.: 250 mm
-
Rotational speed:
Min.: 0 rpm (0 rad.min-1)
Max.: 4000 rpm (25132.74 rad.min-1)
-
Length:
Min.: 91 mm
Max.: 122 mm
Description
Standard:
DIN 6350 - Form A - Cushman system.
Version:
Manual chuck with gear scroll, centrically clamping.
Body made of cast iron or steel.
Gear scroll drop-forged, balanced, and hardened.
Flanks of scroll and of jaw teeth are ground.
High concentricity to DIN 6386, Part 1.
Application:
For spindle noses with thread to DIN 800. The chuck is fitted to a flange from the rear by means of screws and the flange is then mounted on the lathe spindle. Flange blanks must always be fitted first to the machine and then to the chuck.
Supplied with:
1 clamping wrench and fastening screws or studs depending on the chuck.
1 set Reversible jaws with elliptical-bevelled teeth.
Optional extras:
Spare and additional jaws see No. 314000 - 315200.
Swarf protection see No. 312800.
Note:
For self-centring three-jaw lathe chucks see No. 313110 - 313140.